User Manual

29
US
2 Press the BLUETOOTH button.
The speaker system automatically
reconnects to the mobile device it
was most recently connected to.
3 Make sure that the BLUETOOTH
indicator on the bar speaker lights
in blue and [BT] appears in the
front panel display.
A connection between the speaker
system and mobile device has been
established.
4 Start audio playback with the
music app on the connected
mobile device.
Sound is output from the speaker
system.
5 Adjust the volume (page 35).
You can play or pause the content
by using the playback operation
buttons on the remote control.
If sound delay occurs, it may be improved
by setting [Setup] - [Advanced
Settings] - [Bluetooth Settings] - [Bluetooth
Connection Quality] to [Priority on Stable
Connection].
Tip
When the connection is not established,
select “HT-A7000” on the mobile device.
To disconnect the mobile device
Perform any of the following items.
• Disable the BLUETOOTH function on
the mobile device.
• Press the BLUETOOTH button while the
[Bluetooth Audio] screen appears on
the TV screen.
• Set [Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Bluetooth
Mode] to [Transmitter] or [Off].
• Turn off the speaker system or mobile
device.
Listening to Music on a
USB Device
You can play music files stored on a
connected USB device.
For playable types of files, see “Playable
Types of Audio Files” (page 61).
1 Connect the USB device to the
(USB) port.
2 Press HOME.
The home menu appears on the TV
screen.
3 Select [Listen] - [USB
(Connected)] on the home menu.
4 Select the folder on which songs
are stored, then select a song.
The selected song is played and
sound is output from the speaker
system.
5 Adjust the volume (page 35).
Do not remove the USB device during
operation. To avoid data corruption or
damage to the USB device, turn the speaker
system off before connecting or removing
the USB device.
Tip
You can select the USB input directly by
pressing USB on the remote control.
Note
Note