Operating Instructions
Table Of Contents
- Getting Started
- Description and location of parts
- 1: Installing the speakers
- 2: Connecting the speakers
- 3: Connecting the audio/ video components
- 4: Connecting the antennas
- 5: Preparing the receiver and the remote
- 6: Calibrating the appropriate settings automatically (AUTO CALIBRATION)
- 7: Adjusting the speaker levels and balance (TEST TONE)
- Playback
- Amplifier Operations
- Enjoying Surround Sound
- Tuner Operations
- Control for HDMI
- Other Operations
- Using the Remote
- Additional Information
48
GB
Using only the front
speakers and subwoofer
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers and
subwoofer only.
When multi channel surround formats are
input, the signals are downmixed to 2 channel
with bass frequencies being output from the
subwoofer.
When standard 2 channel stereo sources are
input, the receiver’s bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the subwoofer.
Press 2CH.
You can also use SOUND FIELD + or
SOUND FIELD – on the receiver.
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1 Press ?/1 to turn off the
receiver.
2 While holding down SOUND
FIELD +, press ?/1.
“S.F. CLR.” appears on the display and
all sound fields are reset to their initial
setting.
123
VIDEO1 VIDEO2 BD DVD
2CH A.F.D. MOVIE MUSIC
THEATRE
SAT TV SA-CD/CD TUNER
2CH
MASTER VOLUME
AUTO CAL MICMUTING
INPUT SELECTOR
PRESET
ACTIVE
STANDBY
TUNING
SOUND FIELD
?/1
1,2 2