Operating Instructions

27
GB
Getting Started
Example: HT-SS2300
1 Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack on the front panel.
2 Set up the optimizer
microphone.
Place the optimizer microphone at your
listening position.You can also use a stool
or tripod so that the optimizer
microphone remains at the same height as
your ears.
Tip
When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.
Press AMP MENU, then press
AUTO CAL.
You can also select “A.CAL YES” in the
A. CAL menu.
The following appears on the display.
A.CAL [5] t A.CAL [4] t A.CAL [3] t
A.CAL [2] t A.CAL [1]
The measurement process will take
approximately 30 seconds to complete.
The table below shows the display when
measurement starts.
Note
You cannot measure the speaker height of the
surround speakers. Set this value using “SUR POS.”
parameters in the SYSTEM menu (page 37).
MASTER VOLUME
AUTO CAL MICMUTING
INPUT SELECTOR
PRESET ACTIVE
STANDBY
TUNING
SOUND FIELD
?/1
Optimizer
microphone
Performing Auto Calibration
Measurement for Display
Speaker existance TONE
Speaker gain, distance,
frequency response
T.S.P.
Subwoofer gain and distance WOOFER
123
46
78
0/10 ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
VIDEO1 VIDEO2 BD DVD
2CH A.F.D.
RETURN/EXIT
MOVIE MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATRE
SAT TV SA-CD/CD TUNER
?/1
-
O
5
>10
TV ?/1
AV ?/1
MEMORY
MENU/HOME
TOOLS/
OPTIONS
AUTO CAL
Input
buttons
?/1
switch
MASTER
VOL +/–
MUTING
AMP MENU
continued