Operating Instructions
Table Of Contents
- Getting Started
- Description and location of parts
- 1: Installing the speakers
- 2: Connecting the speakers
- 3: Connecting the audio/ video components
- 4: Connecting the antennas
- 5: Preparing the receiver and the remote
- 6: Calibrating the appropriate settings automatically (AUTO CALIBRATION)
- 7: Adjusting the speaker levels and balance (TEST TONE)
- Playback
- Amplifier Operations
- Enjoying Surround Sound
- Tuner Operations
- Control for HDMI
- Other Operations
- Using the Remote
- Additional Information
15
GB
Getting Started
Before you install the speaker and subwoofer,
be sure to attach the supplied foot pads to
prevent vibration or movement as shown in the
illustration below.
Example of HT-SS2300 front
speaker
HT-SF2300 only
You need to attach the supplied foot pads to
the center speaker and subwoofer only.
HT-SS2300 only
You need to attach the supplied foot pads to all
the speakers and subwoofer.
HT-SS2300 only
For greater flexibility in positioning the
speakers, use the optional WS-FV11 or
WS-FV10D speaker stand (available only in
certain countries). For details, refer to the
operating instructions supplied with the
speaker stand.
HT-SF2300 only
For greater flexibility in positioning the
speakers, use the supplied speaker stand. For
details, refer to the supplied speaker stand
installation guide.
Installing the speakers on a flat
surface
Installing the speakers on the
speaker stand