3-296-084-11 I_!!_,! Home Theatre I_ ;ii_System Operating Instructions HT-SF2300 HT-SS2300 ©2008 Sony Corporation (1)
Owner's Record The ruodel and serial of the unit. provided upon your Model Serial Record below. nurubers the serial are located uuruber on the rear regarding you call this product. No. No. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
CAUTION You are cautioned not expressly your that ally changes approved authority to operate _ (applicable in the European Union andofother isposal wasteEuropean batteries countries with separate collection systems) This symbol on the battery or modification ill this manual could void this equipment.
About This Manual • The instructions ill this manual are for model HT-SF2300 and HT-SS2300. Ill this manual, models of area code CEL is used for illustration purposes unless stated otherwise. Ally difference ill operation is clearly indicated ill the text, for example, "Models of area code CEL only".
Note for the supplied remote RM-AAU022 (Models of area code U, UC, CA only) RM-AAU023 (Models of area code CEL, CEK, AU, TW, TH only) 5GB
Tableof Contents Getting Started Tuner Operations Description and location of parts ................... 7 Listening to FM/AM 1: Installing the speakers ............................. 14 Presetting radio stations .......................... 17 Using 2: Connecting the speakers 3: Connecting the audio/video components the antennas 5: Preparing (Models ............................................. 4: Connecting the receiver 6: Calibrating ..........................
Descriptionandlocationof parts o.. Front panel @!z!iii:ii:ii:!ii!:iiii!ii!i!i!!i;!i i!iii ii!!i .... iiiiiiiiii!!i!i!!!i!i !iil Name [] Function Name I/_ Press (on/standby) on or off (page to turn the receiver [] 25, 33, 34, Function MASTER Turn VOLUME level of all speakers at the same time (page 31, 32, 33, 34). MUTING tS"ess to turn off the sound 48). [] [] ACTIVE STANDBY Lights up in amber when the CONTROL FOR lamp HDMI is set to on and the receiver is on standby mode.
About the indicators Name Function [] LFE on the display Name Lights up when the disc being played back contains all LFE (Low Frequency Effect) channel and the LFE channel actually signal [] SLEEP Lights up when activated (page [] Playback channel indicators The letters (L, C, R, etc.) indicate the channels being played back. L R C SL SR S the source Right (monaural [_ [] n13DIGITAL or the [_ [_ {_ HDMI D.RANGE Lights up when dynamic compression is activated 36).
Rear panel _) m, LQ O) ,.% n [] ANTENNA section [] FM ANTENNA ,jack Conuects to the supplied FM wire antenna (page 24). ANTENNA AM terminals supplied AM Conuects to theloop antenna (page 24). D - [] [] DIGITAL INPUT/OUTPUT [_ OPT COAX IN,jacks SPEAKERS section + DMPORT DMPORT Conuects jack DIGITAL MEDIA PORT adapter (page 61). section Conuects a DVD player, etc.to The COAX IN ,jack IN ,jack provides a better sound quality (page 22).
You can use the supplied remote RM-AAU022 (Models of area code U, UC, CA only) or RM-AAU023 (Models of area code CEL, CEK, AU, TW, TH only) to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate (page 63). RM-AAU022 (Models of area code U, UC, CA only) RM-AAU023 (Models of area code CEL, CEK, AU, TW, TH only) ,_,{_ o ...................... ] i 10G8 ] ....... ] ...................... ] ...................... ] .......... ] ...............
Name [] Function Name (on/standby) Press TV I/(_) and TV (_) at the same time to turn the TV on o1"off. AV I/_ tS"ess to turn on or off the (on/standby) Sony audio/video components that the remote is assigned to operate (page 63). If you press I/(_) ([_]) at the same time, it will turn off the receiver and other Sony componeuts (SYSTEM STANDBY). Note The function of the AV I/(_) TV I/(_) [] Function DVD/BD MENU AUTO [] [] Press to display the menu of the DVD or Blu-ray disc on the TV screen.
Name [] Function MENU/HOME Name Press to display the menu of the VCR, DVD player, satellite tuner or Blu-ray disc player on the TV screen. Press MENU/HOME and TV ([) at the same time to [ TV I"<1"<1/b"t_lb) REPLAY _./ ADVANCE._ []RETURN/ EXITd% Press to skip a track of the CD player, DVD player or Blu-ray disc player. [_a)b) Press to start playback VCR, CD player, DVD or Blu-ray disc player.
Name • (RM-AAU022 only) [] Notes Function Press to input the decirual point for channel numbers of the Digital CATV terminal. F_'ess • and TV ([]) at the same time to input the decimal point for the channel numbers of the TV. -]-- Press to select (RM-AAU023 entry digits F_'ess same only) • Some functions work depending • The above example in this section may not on the model. explanation is intended only.
1" Installingthe speakers This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound, be sure to connect all the speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer (5.1 channel).
Before you install the speaker and subwoofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below. Example speaker of HT-SS2300 front HT-SS2300 only For greater flexibility in positioning the speakers, use the optional WS-FVI 1 or WS-FV IOD speaker stand (available only in certain countries). For details, refer to the operating instructions supplied with the speaker stand.
3 You can install your speakers on the wall. 1 Hang the speakers on the sc rews. Example the wall (3/16 the speakers on Hook on the back of the speaker Prepare screws (not supplied) that are suitable for the hook on the back of each speaker. See the illustrations below. ................. 4 mm of installing inch) I, ,I more than 25 mm (1 inch) (3116 inch) 4.6 mm )_ - lomm inch) (13/32 Notes Hook on the back of the speaker 2 Fasten the screws to the wall.
2: Connectingthe speakers Before connecting the cords, be sure to disconnect the AC power cord (mains lead). m, (,Q (/) [] [] Q..
Note on speaker cords The connector of the speaker cords are the same color as the speaker jack to be connected.
3: Connectingthe audio/ videocomponents The following illustration shows how to connect audio components such as Super Audio CD player or CD player. m, if) Super Audio CD player, CD player Q,. This section describes how to hook up your components to this receiver. Before you begin, refer to "Component to be connected" below for the pages which describe how to connect the audio/video components. Before connecting the cords, be sure to disconnect the AC power cord (mains lead).
HDMI features • A digital audio signals transmitted by HDMI can be output from the speakers connected to the receiver. This signal supports Dolby Digital, DTS and Linear PCM. • This receiver supports xvYCC transmission. • This receiver supports the Control for HDMI function. For details, see "Control for HDMI" (page 54). HDMI is the abbreviated name for HighDefinition Multimedia Interface. It is an interface which transmits video and audio signals in digital format.
Notes on HDMI connections • An audio signal input to the HDMI is output HDMI from the SPEAKERS OUT jack. IN jack jacks It is not output and from any other audio jacks. • Video signals input to the HDMI IN jack can only be output • When from the HDMI OUT jack. • Refer to the operating instructions of each component connected for details. • We do not recommend using an HDMI-DVI conversion cable.
The following illustration shows how to connect video components such as DVD player, DVD recorder, VCR, etc. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components.
When you connect or DVD recorder a DVD player You can use the DVD input button remote to control recorder. setting on the your DVD player or DVD You may need to change of this button depending the factory on the remote supplied with this receiver.
4: Connectingthe antennas 5: Preparing the receiver andthe remote Connect the supplied AM loop antenna and FM wire antenna. Before connecting the antennas, be sure to disconnect the AC power cord (mains lead). FM wire antenna (supplied) AM loop antenna (supplied) Connect the AC power cord (mains lead) to a wall outlet. AC power cord (mains lead) To the wall outlet '_The shape of the conuector varies depending on the area code of this receiver.
Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation. Insert two R6 (size-AA) RM-AAU022 (Models batteries in the ,_ of area code U, UC, _" Commander. _. Observe the correct batteries. polarity when installing 1,2 1 2 Press I/@ to turn off the receiver.
6" Calibratingthe appropriatesettings automatically (AUTO CALIBRATION) This receiver is equipped with DCAC (Digital Cinema Auto Calibration) Technology which allows you to perform automatic calibration as follows: • Check the connection between each speaker and the receiver. • Adjust the speaker level. • Measure the distance of each speaker from your listening position. • Measure the speaker polarity. • Measure the frequency characteristics.
Example: HT-SS2300 Optimizer I/(b switch 5" Input buttons ,_, ¢ tJ) AUTO CAL AMP MENU MUTING Q MASTER VOL+/- 1 2 Connect the supplied optimizer microphone to the AUTO CAL MIC jack on the front panel. Press AMP MENU, then press AUTO CAL. You can also select A. CAL Set up the optimizer microphone. Place the optimizer microphone listening position.
2 Tips • When Auto Calibration starts: Stand some distance from the speakers and the listening position to avoid measurement failure. This is because test signals are output from the speakers during measurement. Avoid making noise to get a more accurate measurement. Press tit repeatedly to select the item. Then, press @. Item Explanation RETRY Performs the Auto Calibration again. SAVE Saves the measurement results and exits the setting process.
Error code Cause and remedies Warning code Explanation ERROR SR 33 ERROR SW 33 Subwoofer is not connected. Connect the subwoofer to the SUBWOOFER terminal. ERROR 33 The souud input from the optimizer microphone is out of the acceptable range. It is louder than the loudest sound that can be 35 Auto Calibration. A sound similar to the beep from the speakers while performing Auto Calibration detected. Perform the Auto Calibration environment allow proper WARN 42 The volume is again.
When you have finished Disconnect the optimizer microphone from the receiver. Note If you have changed is recommended again ill order the position of the speakers, that you perform to enjoy Auto the surround it sound. for the Auto Calibration (TEST TONE) Calibration You can adjust the speaker levels and balance while listening to the test tone from your listening position. Tip You can use the A.
5 Press e/t repeatedly to select "T. TONE Y". The test tone is output from each speaker in sequence as fonows: Front left -+ Center -+ Front right -+ Surround right -+ Surround left -+ Subwoofer 6 m, ¢D Q.. Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see "Adjusting the level (LEVEL menu)" (page 39). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +1 .
Selected Selectinga component 1 MUTING 3 input Components that back can [Display] be played DMPORT DIGITAL [DMPORT] adapter conuected DMPORT jack VIDEO VIDEO 1 or 2 VCR, etc., connected to the VIDEO I or VIDEO 2 [VIDEO VIDEO 1 or 2] jack MEDIA PORT to the BD [BD] Blu-ray disc player, etc., conuected to the BD jack DVD [DVD] DVD player, DVD recorder, etc., connected to the DVD jack SAT [SAT] Satellite tuner, set-top box, etc., conuected to the SAT jack TV [TV] TV, etc.
Listening/Watching a component 2 3 3 5 5 Notes • The operation is described for a Sony Super Audio CD player, • Refer to the operating instructions supplied with the Super Audio CD player or CD player. 1 2 3 Turn on the Super Audio CD player/CD player, then place the disc on the tray. Turn on the receiver. Press SA-CD/CD. You can also use INPUT Tips • You call select the sound field to suit the music. Refer to page 46 for details.
2 3 iiiiiiiil 6 Notes • Refer to the operating instructions supplied with the TV and DVD player/Blu-ray disc player. • Check the following if you cannot listen to multi channel sou rid. Be sure this receiver is 6 1 2 3 34_ Press DVD to watch a DVD or press BD to watch a Blu-ray disc. can also use INPUT select -(Models "DVD" button 4 5 6 7 SELECTOR on this receiver to or "BD".
To return to the previous display Press _,. Navigatingthrough menus By using the amplifier menus, you can make various adjustments to customize the receiver. To exit the menu Press AMP MENU. Note Some parameters on the display. unavailable and settings This means may appear dimmed that they are either 1=, or fixed and unchangeable. 3 "o m, ..,1 0 (D o 2-6 1 Press AMP MENU. "l-LEVEL" appears on the display. 2 3 4 5 6 Press tit repeatedly to select the menu you want. Press @ or. menu.
The following options menu. For details menus, are available on navigating in each through see page 35. Initial setting Menu [Display] Parameters [Display] Settings LEVEL Test tone a_ T. TONE [1-LEVEL] (page 39) IT. TONE] Front speaker [FRT BAL] level CNT 10 dB to CNT (1 dB step) Surround left speaker [SL LVL] level Surround right speaker [SR LVL] Subwoofer T. TONE N Y BALANCE BAL. L +1 to BAL. L +10, BALANCE, BAL. R + 1 to BAL. R + 10 balance ay Center speaker [CNT LVL] N, T.
Menu [Display] Parameters [Display] Settings AUDIO [5-AUDIO] (page 41) Digital audio priority a) [DEC. PRI.] input decoding DEC. Initial PCM, DEC. AUTO setting DEC. PCM for: SA-CD/CD; DEC. AUTO for: VIDEO 1, VIDEO 2, BD, SAT, TV, DVD Digital broadcast selection a) language DUAL DUAL M, DUAL M+S S, DUAL M/S, DUAL M [DUAL] 3 Synchronizes audio with output a) [A.V. SYNC.] Switching the audio mode a) [IN MODE] video input A.V.SYNC. 0 to A.V.SYNC. 20 A.V.SYNC.
Menu [Display] Parameters [Display] A. CAL [8-A. CAL] Auto calibration [AUTO CAL] (page Calibration 30) [CAL Settings no/yes a)e) load a)d/ Initial A.CAL NO, A.CAL LOAD YES, and A.F.D. c),,AUDIO scroll "CONTROL" d)When you set "CAL (mm,mm,') e)After 38 G8 appear and "CONTROL A.CAL NO NO LOAD YES FOR HDMI" mode. across the display, then "AUDIO" and respectively. LOAD" ill A.
• Adjustingthe level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. Select "1-LEVEL" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 35) and "Overview of the menus" (page 36). LEVEL menu parameters • T. TONE (Test tone) Lets you adjust the speaker levels and balance while listening to the test tone from your listening position.
Settingsforthesurround sound Adjustingthetone (TONE menu) You can use the TONE tonal quality (bass/treble (SUR menu) menu to adjust the level) of the front speakers. Select "2-TONE" in the amplifier details on adjusting "Navigating "Overview through menus. the parameters, menus" of the menus" For see (page 35) and (page 36).
Settingsforthe tuner Settingsfor theaudio (TUNER menu) (AUDIOmenu) You can use the TUNER menu to set the FM station receiving mode. Select "4-TUNER" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 35) and "Overview of the menus" (page 36). You can use the AUDIO menu to make settings for the audio to suit your preference. Select "5-AUDIO" in the amplifier menus.
• DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital This feature thnctions for Dolby • DUAL Sound only will be output S (Sub) will be output menu to make various adjustments settings details M/S (Main/Sub) for HDMI will be output the front left speaker the sub language and sound of through the will be output front right speaker on adjusting "Navigating of the main language simultaneously • DUAL M+S (Main + Sub) Mixed s
• CONTROL FOR HDMI (Control for HDMI) Lets you turn the Control for HDMI function on or off. For details, "Control for HDMI" (page 54). Settingsfor thesystem (SYSTEMmenu) You can use the SYSTEM menu to set the distance of the speakers connected to this system. Select "7-SYSTEM" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 35) and "Overview of the menus" (page 36). 3 m, SYSTEM menu parameters o • FL DIST. (Front left speaker distance) • FR DIST.
• SW DIST. (Subwoofer distance) Lets you set the distance from your listening position to the subwoofer. Tip If you set "CAL LOAD" ill A. CAL menu to "LOAD YES", you can at!just the speakers distance ill 0.01 meter (1 inch) increment. • SUR POS. (Surround speaker position) Lets you specify the location of your surround speakers for proper implementation of the surround effects in the CINEMA STUDIO EX modes (page 47).
EnjoyingDolbyDigital andDTSSurroundsound Press A.F.D. repeatedly to select the sound field you want. You can also use SOUND FIELD + or SOUND FIELD - on the receiver. For details, see "Types of A.F.D mode" below. (AUTO FORMAT DIRECT) The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound. Ill .=. O m. €/) e,- o e,- I2. €/) O Types of A.F.D. mode e,- A.F.D.
Selectinga preprogrammed soundfield You can take advantage of surround sound simply by selecting one of the receiver's preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. _Q_ _i!ii!iiii!ii!ii!i_ii!ii!ii!ii!ii!i!i!i:i ¸ MUSIC -- MOVIE Press MOVIE repeatedly to select a sound field for movies or press MUSIC repeatedly to select a sound field for music. You can also use SOUND FIELD + or SOUND FIELD - on the receiver.
Types of sound field available Sound field Sound field Effect for [Display] Movie CINEMA STUDIO [C.ST.EX EX A AI Reproduces the sound characteristics of the Sony Pictures Entertaimnent "Cary Grant Theater" cinema production studio. This is a standard mode, great for watching ahnost ally type of movie. CINEMA STUDIO [C.ST.EX EX B B] Reproduces the sound characteristics of the Sony Pictures Entertaimnent "Kim Novak Theater" ciuema production studio.
Usingonlythe front speakersandsubwoofer (2CH STEREO) In this mode, the receiver outputs the sound from the front left/right speakers and subwoofer only. When multi channel surround formats are input, the signals are downmixed to 2 channel with bass frequencies being output from the subwoofer. When standard 2 channel stereo sources are input, the receiver's bass redirection circuitry will be activated. The front channel bass frequencies will be output from the subwoofer. 2CH Press 2CH.
Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. Listeningto FM/AMradio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (page 24). The tuning scale for direct on the area code as shown Area Press TUNING + or TUNING -. Press TUNING + to scan from low to high; press TUNING - to scan from high to low.
Presettingradiostations You can enter the frequency of a station directly by using the numeric buttons. You can preset up to 30 FM stations and 30 AM stations. Then you can easily tune in the stations you often listen to. 2 4 1 4 Press TUNER repeatedly to select the FM or AM band. 5 You can also use INPUT SELECTOR on the receiver. 2 3 Press D.TUNING. Press the numeric buttons to enter the frequency. PRESET Example 1: FM 102.
4 Press the numeric buttons select a preset number. to You can also press the PRESET + or PRESET - to select a preset number. If "MEMORY" goes out before you select the preset number, start again from step 3. 5 Press ENTER. The station is stored as the selected preset number. Numeric buttons If "MEMORY" goes out before you press ENTER, start again from step 3. 6 ENTER Repeat steps 1 to 5 to preset another station. --I 2 o "O 1 2 m, o Press TUNER repeatedly to select the FM or AM band.
Usingthe RadioData System(RDS) While receiving an RDS station, press DISPLAY repeatedly. Each (Models of area code CEL, CEK only) This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can display RDS information. Notes • RDS is operable only for FM stations. • Not all FM stations provide RDS service, nor do they provide the same type of services.
Program type indication Description VARIED Other types of programs such as celebrity interviews, panel games, and comedy POP M Popular music ROCK M Rock EASY M Easy Listening LIGHT M programs Instrumental, music CLASSICS OTHER music programs vocal, and choral Performances of major orchestras, chamber music, opera, etc. M Music that does not fit into any categories above, such as Rhythm & Blues and Reggae WEATHER Weather information FINANCE Stock market etc.
Note Depending Control on the connected for HDM! the operating Usingthe Controlfor HDMI functionfor "BRAVIA" Sync To use "BRAVIA" Sync, set the Control for HDMI function as explained below.
To enjoy TV multi channel surround sound broadcasting You can listen to TV multi channel surround sound broadcasting from the speakers connected to the receiver. Before connecting the cords, be sure to disconnect the AC power cord. Satellite tuner/Set-top Connect the OPTICAL output jack of the TV to the TV OPT IN jack of the receiver.
5 Set the Control for HDMI function for the PreparingControlfor HDMI function This receiver supports the Control for HDMIEasy Setting function. This function is only available for certain types of TV. When you perform the Control for HDMI-Easy Setting from the TV, the Control for HDMI setting on this receiver will automatically change accordingly. During Control for HDMI-Easy Setting operation, "CONTROL", "SCAN FOR" and "HDMI" appear sequentially in the display.
Watchinga DVD (One-TouchPlay) You can enjoy sound and image from the components connected to the receiver via HDMI connections by a simple operation. 2-6 Play back a connected component. The receiver and the TV are turned on automatically and switched to the appropriate HDMI input. Watching operation 4 / Press AMP "l-LEVEL" MENU. appears on the display. 2 Press _/_ repeatedly "6-VIDEO". 3 Press @ menu.
Notes EnjoyingtheTV sound fromthe speakers connectedto the receiver • If Systeru "CONTROL ON", the "AUDIO ruenu the System • When You can enjoy the TV sound from the speakers connected to the receiver by a simple operation. You can operate System Audio Control function using the TV menu. For details, refer to the operating instructions of the TV. When System Audio Control function is turned on, the receiver will turns on and switches to the appropriate input automatically.
Notes Turningoff the receiver with theTV • Set the TV Standby the Systeru the operating • Depending (System Power Off) coruponents Power Synchro instructions on the status, and the connected components remote using refer to of the TV. instructions off. For details, of the connected componeuts, When you turn the TV off by using the POWER button on the TV's remote, the off automatically.
Enjoyingthe DIGITAL MEDIAPORT Switchingbetween digital andanalogaudio (IN MMODE) You can select the audio input mode setting when you connect components to both digital and analog audio input jacks on the receiver. 1 Press AMP MENU. "1-LEVEL" appears on the display. 2 3 4 5 6 Press 4,/+ repeatedly to select "5-AUDIO". Press (_ menu. or, to enter the Press ,It repeatedly to select "IN MODE". Press (_ or, parameter. to enter the Press 4,/+ repeatedly to select the audio input you want.
To detach the DIGITAL MEDIA PORT adapter from DMPORT jack You can listen to the sound from the component connected through the DIGITAL MEDIA PORT adapter to the DMPORT jack on the receiver. You can also view the images on the TV screen by connecting the video output of the DIGITAL MEDIA PORT adapter to the video input of the TV. Press and hold both sides of the connector and then pull out the connector.
Tip When listening to MP3 or other compressed using a portable sound. Press "PORTABLE" audio MUSIC (page source, repeatedly 46). music you call enhance to select the Usingthe SleepTimer You can set the receiver automatically to turn off at a specified time. Press SLEEP repeatedly while the power is on.
Categories and the corresponding buttons Categories Changingbutton assignments You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD recorder to the VIDEO 1 jacks on the receiver, you can set the VIDEO 1 button on this remote to control the DVD recorder.
• Dolby Digital Glossary • Cinema Studio EX A surround sound mode that can be regarded as the compilation of Digital Cinema Sound technology, delivers the sound of a dubbing theater using three technologies: "Virtual Multi Dimensions", "Screen Depth Matching", and "Cinema Studio Reverberation". "Virtual Multi Dimensions", the virtual speaker technology, creates a virtual multisurround environment with actual speakers up to 7.
• HDMI (High-Definition Multimedia Interface) HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection, allowing you to enjoy high quality digital picture and sound. The HDMI specification supports HDCP (High-bandwidth Digital Contents Protection), a copy protection technology that incorporates coding technology for digital video signals. • L.F.E.
On placement If color irregularity • Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. • Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. • Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions. again... • Do not place the receiver near equipment such as a TV, VCR, or tape deck.
Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Audio There is no sound, no matter which component is selected, or only a very low-level sound is heard. • Check that the speakers and components are connected securely. • Check that both the receiver and all components are turned on. • Check that MASTER VOLUME is not set to "VOL MIN". • Press MUTING to cancel the muting function.
Thereis nosoundfrom the subwoofer. • Check that the subwoofer is connected correctly and securely. The surround effect cannot be obtained. • Make sure the sound field function is on (press MOVIE, or MUSIC). • Sound fields do not function for signals with a sampling frequency of more than 48 kHz. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc.
The control work. for HDMI function does not • Check the HDMI connection (page 20). • Make sure "CONTROL FOR HDMI" is set to "CTRL • Make compatible function. • Check ON" in VIDEO sure the connected with the Control the Control the connected operating instructions is for HDMI for HDMI component. component. • Repeat the procedures menu. component settings on Refer to the of the connected Tuner The FM reception is poor.
TheRDSinformation thatyouwant doesnotappear, a) • Contact the radio station and find out whether they actually provide the service in question. If so, the service may be temporarily out of order. If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver's memory may remedy the problem (page 25). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver.
Models of area code TH Specifications Power Output I) Stereo mode (rated) (3 ohms at 1 kHz, THD 1%) AUDIO POWER SPECIFICATIONS Surround mode (reference) RMS Output (3 ohms at I kHz, THD POWER OUTPUT AND TOTAL HARMONIC DISTORTION: 10%) (Models of area code U, UC only) With 3 ohm loads, both channels driven, from FRONT2): 125 W/ch CENTER2): 125 W SUR2): 125 W/ch 170 - 20,000 Hz; rated 84 watts per channel minimum RMS power, with no more than l(Tc total harmonic distortion from 250 milliwatts (1.
FM tuner section Power Tuning range Antenna Antenna terminals Intermediate Area 75 ohms, unbalanced U, CEL, TW frequency 10.7 MHz AM tuner section Tuning range Area code consumption 87.5 - 108.0 MHz FM wire antenna code Power CEK, AU, UC, CA 165 W (for USA) 245 VA (for CANADA) TH ! 40 W Power consumption (during standby mode) 0.3 W (When "CONTROL FOR HDMI" in VIDEO menu is set to "CTRL OFF') Dimensions (Approx.) 430 x 66.
Surround speaker Center speaker 108 x 540 x 78 rain (4 3/8 x 21 3/8 x 3 1/8 inches) (without stand) 290 x 1,045 - 1,235 x 290 mm(ll 1/2x41 1/448 5/8 x 11 1/2 inches) (with stand) HT-SS2300 only • Front speaker (SS-MSP23S) 380 x 50 x 64 mm (15 x 2 x 2 5/8 inches) Surround (with foot) • Surround speaker (SS-SRP23S) • Center speaker (SS-CNP23) Front/Center speaker Full range, Magnetically shielded speaker Front/Surround Mass (Approx.) Front speaker Surround speaker 1.
Supplied speakers Front speaker (2) Center speaker (1) Surround speaker (2) Subwoofer ( 1) Supplied accessories Operating Instructions (this manual) Quick Setup Guide (1) Speaker Stand Installation only) (1) FM wire antenna Guide (HT-SF2300 ( 1) AM loop antenna ( 1) Remote colnlnander • RM-AAU022 (l) (Models of area code U, UC, CA only) • RM-AAU023 (l) (Models of area code CEL, CEK, AU, TW, TH only) R6 (size-AA) Optimizer batteries microphone (2) (ECM-AC2) (1 Speaker cords (5) Foot pads • Spea
Index Numerics 2 channel 48 HDMI 2CH STEREO 5.1 channel S H 48 Satellite Audio 14 for HDMI 42 connecting 20 Control for HDMI CALIBRATION AUTO FORMAT (A.F.D.
*329608411 Sony Corporation * (1) Printed in Malaysia http://www.sony.
