Operating Instructions
Table Of Contents
- Getting Started
- Description and location of parts
- 1: Installing speakers
- 2: Connecting speakers
- 3: Connecting the audio/ video components
- 4: Connecting the antennas
- 5: Preparing the receiver and the remote
- 6: Calibrating the appropriate settings automatically (AUTO CALIBRATION)
- 7: Adjusting the speaker levels and balance (TEST TONE)
- Playback
- Amplifier Operations
- Enjoying Surround Sound
- Tuner Operations
- Other Operations
- Using the Remote
- Additional Information
42
GB
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HT-
SF2000-CEL.fm
masterpage: Left
[HT-SF2000/HT-SS2000]
3-210-806-11
(1)
x CONTROL (HDMI CONTROL)*
Lets you turn the HDMI CONTROL function
on or off.
For details, refer to the HDMI CONTROL
Guide supplied with the receiver.
* When you select this parameter, the “HDMI”
indicator flashes in the display.
Settings for the system
(SYSTEM menu)
You can use the SYSTEM menu to set the
distance of the speakers connected to this
system.
Select “7-SYSTEM” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 34) and
“Overview of the menus” (page 35)
SYSTEM menu parameters
x FL DIST. (Front left speaker
distance)
x FR DIST. (Front right speaker
distance)
x CNT DIST. (Center speaker
distance)
x SL DIST. (Surround left speaker
distance)
x SR DIST. (Surround right
speaker distance)
x SW DIST. (Sub woofer distance)
Lets you set the distance from your listening
position to the speakers and sub woofer.