filename[D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB01COV_HTSF2000-CEL.fm] masterpage:Right 3-210-806-11(2) Home Theatre System Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. Model No.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB02REG_HTSF2000-CEL.fm3-210-806-11(2) masterpage: Left WARNING WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB02REG_HTSF2000-CEL.fm masterpage: Right For customers in Europe Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB02REG_HTSF2000-CEL.fm3-210-806-11(2) This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. **“DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB01COV_HTSF2000-CELTOC.fm masterpage: Right Table of Contents Getting Started Tuner Operations Description and location of parts .................. 6 1: Installing speakers................................... 13 2: Connecting speakers ............................... 16 3: Connecting the audio/video components ............................................ 18 4: Connecting the antennas .........................
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Left Getting Started Description and location of parts Receiver Front panel 1 2 3 PRESET TUNING 4 56 7 8 SOUND FIELD MASTER VOLUME MUTING AUTO CAL MIC 9 Name Function Name Function A ?/1 (on/standby) Press to turn the receiver on or off (page 24, 32, 33, 49). H MUTING Press to mute the sound (page 31).
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Right About the indicators on the display SLEEP L LFE SL SW qf 3 C S 4 5 6 DIGITAL HDMI DTS PL SR OPT COAX D.RANGE MEMORY RDS ST MONO R qd 7 qs qa q; 9 8 Name Function Name Function A LFE Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm Name Function M DTS Lights up when the receiver is decoding DTS signals. Note When playing a DTS format disc, be sure that you have made digital connections. N SW Lights up when the audio signal is output from the SUBWOOFER jack.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm Name Remote commander You can operate the receiver with the supplied remote. You can also use the remote to control the Sony audio/video components that the remote is assigned to operate (page 59). RM-AAU017 1 TV ?/1 TV INPUT SLEEP DMPORT AV ?/1 ?/1 2 wa SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SAT TV 2CH A.F.D.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Right Function Name Function D MOVIE Press to select sound fields (MOVIE). L TV CH +/– MUSIC Press to select sound fields (MUSIC). Press TV CH +/– and TV (M) at the same time to select preset TV channels. A.F.D. Press to select A.F.D. mode. 2CH Press to select 2CH STEREO mode. E AMP MENU Press to display the menu of the receiver. Then, use V, v, B, b and (P) to perform menu operations.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Left Name Function Name O RETURN/ EXIT O Press to – return to the previous menu. – exit the menu while the menu or on-screen guide of the VCR, DVD player, satellite tuner or Blu-ray disc player is displayed on the TV screen. Press RETURN/EXIT O and TV (M) at the same time to return to the previous menu or exit the TV’s menu while the menu is displayed on the TV screen.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Right 1: Installing speakers Getting Started This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel).
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Left Installing the speakers on a flat surface Installing the speakers on the wall Before you install the speaker and sub woofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below. You can install your speakers on the wall.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Right Example of installing the speakers on the wall Getting Started Hook on the back of the speaker 4.5 mm (3/16 inch) Notes • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Right Note on speakers The connector of the speaker cords are the same color as the speaker jack to be connected. When connecting a speaker cord, be sure to match the colored connector to the speaker jack on the receiver: To connect the speakers correctly, be sure to check the type of speakers by referring to the speaker label* at the rear panel or bottom of the speakers.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm 3: Connecting the audio/ video components masterpage: Left Connecting audio components The following illustration shows how to connect audio components such as Super Audio CD player or CD player. How to hook up your components Super Audio CD player/ CD player This section describes how to hook up your components to this receiver.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Left Notes • You cannot do recording on the DVD recorder or VCR via this receiver. For details, refer to the operating instructions supplied with the DVD recorder or VCR. • To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm HDMI feature A digital audio signals transmitted by HDMI can be output from the speakers connected to the receiver. This signal supports Dolby Digital, DTS and linear PCM. HDMI is the abbreviated name for HighDefinition Multimedia Interface. It is an interface which transmits video and audio signals in digital format.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm If you connect a Blu-ray disc player Be sure to change the factory setting of the VIDEO 2 input button on the remote so that you can use the button to control your Blu-ray disc player. For details, see “Changing button assignments” (page 59). Notes on HDMI connections • Use a HDMI cable with the HDMI logo (made by Sony). • An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks and HDMI OUT jack.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm masterpage: Right 4: Connecting the antennas Getting Started Connect the supplied AM loop antenna and FM wire antenna.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm 5: Preparing the receiver and the remote Connecting the AC power cord Connect the AC power cord to a wall outlet. AC power cord masterpage: Left Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm Insert two R6 (size-AA) batteries in the RM-AAU017 remote commander. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix alkaline batteries and other kinds of batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm Before you perform Auto Calibration Before you perform the Auto Calibration, set up and connect the speakers (page 13, 16). • The AUTO CAL MIC jack is used for the supplied optimizer microphone only. Do not connect other microphones to this jack. Doing so may damage the receiver and the microphone. • During the calibration, the sound that comes out of the speakers is very loud.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm Performing Auto Calibration ?/1 ?/1 switch SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SAT TV 2CH A.F.D. MOVIE 1 2 3 4 5 6 DVD Input buttons SA-CD/CD TUNER AMP MENU AUTO CAL 7 8 - 0/10 CLEAR D.SKIP MEMORY DVD MENU ENTER FM MODE TOOLS MUTING DISPLAY F G MUTING The Auto Calibration function will be canceled when you do the following during the measurement process: – Press ?/1 or MUTING.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm 2 3 masterpage: Left Press V/v repeatedly to select the item. Then, press . Error code Cause and remedies Item Explanation RETRY Performs the Auto Calibration again. ERROR SW 33 Sub woofer is not connected. Connect the sub woofer to the SUBWOOFER terminal. SAVE Saves the measurement results and exits the setting process. WARN CHK Displays warning concerning the measurement results.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm Warning code Explanation The distance and position of a sub woofer cannot be detected. This may be caused by noise. Try to perform the Auto Calibration in a quiet environment. NO WARN There is no warning information. When you select “PHASE” You can check the phase of each speaker (in phase/out of phase). A. CAL menu parameters You can use the A.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB03CON_HTSF2000-CEL.fm 7: Adjusting the speaker levels and balance 5 Tip The receiver employs a test tone with a frequency centered at 800 Hz. 2CH A.F.D. MOVIE MUSIC AMP MENU 1 2 3 1 7 5 8 >10/ - 0/10 CLEAR 6 9 D.SKIP MEMORY DVD MENU ENTER FM MODE F 2-5 G For details, see “Adjusting the level (LEVEL menu)” (page 38).
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB04PLA_HTSF2000-CEL.fm Playback Selecting a component ?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SAT TV 2CH A.F.D. MOVIE 1 2 3 4 5 6 7 8 9 DVD SA-CD/CD TUNER 1 MUSIC AMP MENU Selected input [Display] Components that can be played back DMPORT [DMPORT] DIGITAL MEDIA PORT adapter connected to DMPORT jack VIDEO 1 [VIDEO 1] VCR, etc., connected to the VIDEO 1 jack VIDEO 2 [VIDEO 2/BD]* Blu-ray disc player, etc.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB04PLA_HTSF2000-CEL.fm masterpage: L-2 Listening/Watching a component Listening to a Super Audio CD/CD TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SAT TV 2CH A.F.D. MOVIE 1 2 3 4 5 6 DVD SA-CD/CD TUNER MUSIC AMP MENU 3 2 3 PRESET TUNING SOUND FIELD MASTER VOLUME MUTING AUTO CAL 7 9 8 CLEAR D.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB04PLA_HTSF2000-CEL.fm masterpage: R-2 Watching a DVD TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 TV SA-CD/CD TUNER 2CH A.F.D.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm To return to the previous display Amplifier Operations Press B. Navigating through menus To exit the menu Press AMP MENU. By using the amplifier menus, you can make various adjustments to customize the receiver. 2CH A.F.D. MOVIE 1 2 3 4 5 6 7 8 9 MUSIC AMP MENU masterpage: Left Note Some parameters and settings may appear dimmed on the display.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Right Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 34. Parameters [Display] Settings Initial setting LEVEL [1-LEVEL] (page 38) Test tonea) [T. TONE] T. TONE Y, T. TONE N T. TONE N Front speaker balancea) [FRT BAL] BAL. L +1 to BAL. L +10, BALANCE BALANCE, BAL. R +1 to BAL.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Left Menu [Display] Parameters [Display] Settings Initial setting AUDIO [5-AUDIO] (page 40) Digital audio input decoding prioritya) [DEC. PRI.] DEC. AUTO, DEC. PCM DEC. AUTO for: VIDEO 1, VIDEO 2/BD, SAT, TV, DVD; DEC. PCM for: SA-CD/CD Digital broadcast language selectiona) [DUAL] DUAL M/S, DUAL M, DUAL S, DUAL M+S DUAL M Synchronizes audio with video outputa) [A.V. SYNC.] A.V.SYNC. 0 to A.V.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Right Menu [Display] Parameters [Display] Settings Initial setting A. CAL [8-A. CAL] (page 29) Auto calibration on/offa)e) [AUTO CAL] A.CAL YES, A.CAL NO A.CAL NO Calibration loada)d) [CAL LOAD] LOAD NO, LOAD YES LOAD YES a) For details, refer to the page in the parentheses. The surround effect is not available for 2CH STEREO and A.F.D. mode.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. Select “1-LEVEL” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 34) and “Overview of the menus” (page 35). LEVEL menu parameters x T.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm Adjusting the tone (TONE menu) TONE menu parameters x BASS LVL (Front speaker bass level) x TRE LVL (Front speaker treble level) Settings for the surround sound (SUR menu) You can use the SUR menu to select the sound field you want for your listening pleasure. Select “3-SUR” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 34) and “Overview of the menus” (page 35).
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Left Settings for the tuner Settings for the audio (TUNER menu) (AUDIO menu) You can use the TUNER menu to set the FM station receiving mode. Select “4-TUNER” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 34) and “Overview of the menus” (page 35). You can use the AUDIO menu to make settings for the audio to suit your preference.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm x DUAL (Digital broadcast language selection) x A.V. SYNC. (Synchronizes audio with video output) Lets you delay the audio output so that the time gap between the audio output and visual display is minimized. You can adjust from 0 (0 ms) to 20 (200 ms) in 1 (10 ms) steps. Notes • This parameter is useful when you use a large LCD or plasma monitor or a projector.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Left x CONTROL (HDMI CONTROL)* Lets you turn the HDMI CONTROL function on or off. For details, refer to the HDMI CONTROL Guide supplied with the receiver. * When you select this parameter, the “HDMI” indicator flashes in the display. Settings for the system (SYSTEM menu) You can use the SYSTEM menu to set the distance of the speakers connected to this system. Select “7-SYSTEM” in the amplifier menus.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm Tips x SUR POS. (Surround speaker position) Lets you specify the location of your surround speakers for proper implementation of the surround effects in the CINEMA STUDIO EX modes (page 47). Amplifier Operations • If you set “CAL LOAD” in A. CAL menu to “LOAD YES”, you can adjust the speakers distance in 0.01 meter (1 inch) increment.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Left Tip Surround speaker position is designed specifically for implementation of the CINEMA STUDIO EX modes. For other sound fields, speaker position is not so critical. Those sound fields were designed under the premise that the surround speakers would be located behind the listening position, but presentation remains fairly consistent even with the surround speakers positioned at a rather wide angle.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Right Types of A.F.D. mode Decoding mode A.F.D. mode [Display] Multi channel audio after decoding Effect (Detecting automatically) A.F.D. AUTO [A.F.D. AUTO] (Detecting automatically) Presents the sound as it was recorded/ encoded without adding any surround effects. However, this receiver will generate a low frequency signal for output to the sub woofer when there is no LFE signals.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Left Selecting a preprogrammed sound field You can take advantage of surround sound simply by selecting one of the receiver’s preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. VIDEO 1 VIDEO 2 VIDEO 3 SAT TV 2CH A.F.D. DVD SA-CD/CD TUNER MOVIE MUSIC 2CH MUSIC AMP MENU A.F.D.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Right Types of sound field available Sound field [Display] Effect Movie CINEMA STUDIO EX A DCS [C.ST.EX A] Reproduces the sound characteristics of the Sony Pictures Entertainment “Cary Grant Theater” cinema production studio. This is a standard mode, great for watching almost any type of movie. CINEMA STUDIO EX B DCS [C.ST.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm masterpage: Left Notes • The effects provided by the virtual speakers may cause increased noise in the playback signal. • When listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly from the surround speakers. • This function does not work for signals with a sampling frequency of more than 48 kHz.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm Resetting sound fields to the initial settings Be sure to use the buttons on the receiver for this operation. 1,2 2 PRESET TUNING SOUND FIELD MASTER VOLUME 2 Tuner Operations Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (page 23).
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 masterpage: Left Direct tuning You can enter the frequency of a station directly by using the numeric buttons. SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 Press TUNING + or TUNING –. Press TUNING + to scan from low to high; press TUNING – to scan from high to low.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm Presetting radio stations 4 VIDEO 1 VIDEO 2 VIDEO 3 SAT TV 2CH A.F.D. MOVIE 1 2 3 4 5 6 7 8 5 1 MUSIC 6 AMP MENU 4 Press ENTER. The station is stored as the selected preset number. If “MEMORY” goes out before you press ENTER, start again from step 3. DVD SA-CD/CD TUNER Press the numeric buttons to select a preset number. You can also press the PRESET + or PRESET – to select a preset number.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm Tuning to preset stations Using the Radio Data System (RDS) SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SAT TV 2CH A.F.D. MOVIE 1 2 3 4 5 6 7 8 9 DVD SA-CD/CD TUNER 1 MUSIC AUTO CAL D.TUNING CLEAR D.SKIP MEMORY DVD MENU ENTER FM MODE DISPLAY TOOLS MUTING >10/ - 0/10 F ENTER TV VOL MASTER VOL G g f RETURN/EXIT MENU TV CH – TV CH + PRESET – REPLAY ADVANCE PRESET + < < .
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB05AMP_HTSF2000-CEL.fm Displaying RDS information While receiving an RDS station, press DISPLAY repeatedly. Each time you press the button, RDS information on the display changes cyclically as follows: Program Service name t Frequency t Program Type indicationa) t Radio Text indicationb) t Current Time indication (in 24-hour system mode) t Sound field currently applied t Volume level a) Type b) Text of program being broadcast (page 53).
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm masterpage: Left x COAX IN Other Operations Switching between digital and analog audio (IN MODE) x OPT IN Specifies the digital audio signals input to the DIGITAL OPT IN jack. x ANALOG You can select the audio input mode setting when you connect components to both digital and analog audio input jacks on the receiver. 1 Specifies the digital audio signals input to the DIGITAL COAX IN jack. Press AMP MENU.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm Enjoying the DIGITAL MEDIA PORT (DMPORT) The DIGITAL MEDIA PORT (DMPORT) allows you to enjoy sound from a network system such as a portable audio source or computer. By connecting a DIGITAL MEDIA PORT adapter (not supplied), you can enjoy sound from the connected component on the receiver. For details, see the operating instructions supplied with the DIGITAL MEDIA PORT adapter.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm To detach the DIGITAL MEDIA PORT adapter from DMPORT jack 1 2 1 Listening to a connected component through DMPORT connection 1 ORT 2 Start playback of the connected component. The sound is played back on the receiver. For details, see the operating instructions supplied with the DIGITAL MEDIA PORT adapter.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm Listening to digital sound from other inputs 5 Press or b to enter the parameter. 6 Press V/v repeatedly to select the digital audio input you want to reassign (for example, “VD1 OPT”). 7 Press or b to enter your selection. 8 Press V/v repeatedly to select the input you want the digital audio input selected in step 6 to be reassigned to (for example, “VD1–DVD”).
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm Assignable inputs for digital audio input The initial setting is marked with an underscore. masterpage: Left Using the Sleep Timer Digital audio Assignable input inputs [Display] Display You can set the receiver to turn off automatically at a specified time. VIDEO 1 OPTICAL [VD1 OPT] VIDEO 1 VD1– VD1 Press SLEEP repeatedly while the power is on.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm Using the Remote masterpage: Right Categories and the corresponding buttons Categories Changing button assignments You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD recorder to the VIDEO 1 jacks on the receiver, you can set the VIDEO 1 button on this remote to control the DVD recorder.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm Additional Information Glossary x Dolby Digital Digital audio encoding/decoding technology developed by Dolby Laboratories, Inc. It consists of front (Left/Right), center, surround (Left/Right) and sub woofer channels. It is a designated audio standard for DVD-video and also known as 5.1 channel surround.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm masterpage: Right On placement Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources On heat buildup Although the receiver heats up during operation, this is not a malfunction.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm If color irregularity is observed again... Place the speaker further away from the TV set. If howling occurs Reposition the speakers or turn down the volume on the receiver. masterpage: Left Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm There is no sound from one of the front speakers. • Make sure you have connected to both the L and R jacks of an analog component, and not only to either the L or R jack. Use an audio cord (not supplied). The source sound input to the HDMI jack on the receiver is not output from the TV speaker. • Check the setting of HDMI AUDIO in the VIDEO menu (page 41). • Check the HDMI connection.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm Video There is no picture or an unclear picture appears on the TV screen or monitor. • Make sure you have connected the video output of your video component to the TV. • Move your audio components away from the TV. The source image input to the HDMI jack on the receiver is not output from the TV. • Check the HDMI connection. • Depending on the playback component, you may need to set up the component.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm masterpage: Right Error messages If there is a malfunction, the display shows a message. You can check the condition of the system by the message. Refer to the following table to solve the problem. If any problem persists, consult your nearest Sony dealer. If an error message appears while you perform Auto Calibration, see “When error codes appear” (page 28) to solve the problem.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm 1) Measured under the following conditions: masterpage: Left General Area code Power requirements Power requirements U, UC 120 V AC, 60 Hz Area code CEL, CEK 230 V AC, 50 Hz U, UC 120 V AC, 60 Hz CEL, CEK 230 V AC, 50/60 Hz 2) Reference power output for front, center, surround speakers and sub woofer. Depending on the sound field settings and the source, there may be no sound output.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB06OTH_HTSF2000-CEL.fm Dimension (w/h/d) (Approx.) Front/surround speakers 92 × 538 × 74 mm (3 5/8 × 21 1/4 × 3 inches) 300 × 1,229 (max.) × 300 mm (11 7/8 × 48 1/2 (max.) × 11 7/8 inches) with stand Center speaker 260 × 91 × 80 mm (10 1/4 × 3 5/8 × 3 1/4 inches) Mass (Approx.) Front/surround speakers 1.1 kg (2 lb 7 oz) 2.8 kg (6 lb 3 oz) with stand Center speaker 0.
D:\CANNES\SONY_HA\JOB 2007\HT-SS2000\IM_SS2000\Data_CEL\Data_GB\GB01COV_HTSF2000-CELIX.fm masterpage: Right Index Numerics I T 2 channel 48 2CH STEREO 48 5.1 channel 13 IN MODE 54 Initial setup 24 TEST TONE 30 Tuner connecting 23 Tuning automatically 49 directly 50 to preset stations 52 TV connecting 19 A AUTO CALIBRATION 25 AUTO FORMAT DIRECT (A.F.D.) 44 B Blu-ray disc player connecting 21 C M Menu A.
