S ON3t'2_ 3210800,,_ Home Theatre System Operating Owner's The model Instructions Record and serial numbers are located on the rear of the unit. Record serial number in the space provided below. Refer upon your Sony dealer regarding this product. Model No. H-I--SF2000 H-I--SS2000 @2007 Sony Corporation Serial No.
WARNING To reduce This equipment has been tested and found to comply with the limits for a Class B digital device, puxsuant to Part 15 of the FCC Rules. These limits are the risk of fire or electric shock, do not expose rain or moisture. this apparatus to To prevent fire, do not cover the ;'entilation of the apparatus with newspapers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus.
For customers in Europe Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) packaging indicates that this product shall not be treated as household This symbol on the product o1"on its waste. Instead it shall be handed o;er About This Manual • The instructions in this manual are for model HT-SF2000 and HT-SS2000. In this manual, models of m'ea code CEL is used for illustration purposes unless stated otherwise.
This receiver incorporates Dolby* Digital and Pru Logic Sun'ound and the DTS** Digital Surround System. * Manufactured under license from Dolby LaboratolJes. "Dolby', "Pro Logic" and the double-D symbol m'e trademm'ks of Dolby Laboratories. ** 'DTS" and "DTS Digital Surround" are registered trademm'ks of DTS, Inc. This receiver incorporates High-Definition Multimedia Interface (HDMF M)technology.
Tableof Contents Getting Started Tuner Operations Description and location 1: Installing speakers ................................... of parts .................. 2: Connecting speakers 3: Connecting the audio/video components 6: Calibrating to FM/AM Presetting radio stations ............................... 16 Using and the remote the appropriate 23 .... 24 (AUTO CALIBRATION) balance the speaker ...................... 25 ..........................
Descriptionand locationof parts Front panel Name Function Name [] I/@ (on/standby) Press to turn the receiver on or off (page 24, 32, 33. 49). [] [] Display The cm'rent status of the selected component or a list of selectable items appears here (page 7). [] PRESETTUNING +/- Press to select a preset station (page 52). [] SOUND FIELD +/- Press to select a sound field (page 44, 46, 48, 49). [] Remote Receives signals from remote commander.
About the indicators on the display m. Name Function Name Fu nction [_ LFE Lights up when the disc being played back contains an LICE (Low Frequency Effect) channel and the LFE chmmel signal is actuNly being reproduced. [_ Preset station indicators Lights up when receiver to tune you have preset. presetting radio page 51. [_ SLEEP Lights up when tile sleep timer is actix'ated (page 5g). [_ D.RANGE [_ Playback channel indicators The letters (L, C, R, etc.
Name Function [] DTS Lights up when the receiver is decoding DTS signals. Note When playing a DTS format disc, be sure that you have made digital connections. [] SW Lights up when the audio signal is output from the SUBWOOFER jack.
Rear panel m. tn Q. [] ANTENNA O [] DIGITAL section FM ANTENNA jack Connects to the FM wire antenna supplied with this receiver (page 23). AM ANTENNA terminals Connects to the AM loop antenna supplied with this receiver (page 23). INPUT/OUTPUT OPT IN jack D O [] SPEAKERS Q IN/ (Front OUT jack DMPORT jack (Front speaker) White left speaker) SUR R (Surround Connects to a DVD player, etc. The COAX IN jack provides a better Co_mect to a DIGITAL MEDIA PORT adapter (page 55).
Name Function [] TV I/(_) (on/standby) Press TV I/(_)and TV ([]) at the same time to tuxn the TV on or off. AV I/@ (on/standby) Press to tm'n on or off the Sony audio/video components that the remote is assigned to operate. If you press I/@ {[2]) at the same time, it will tm'n off the receiver and other components iSYSTEM STANDBY). Note The function of the AV I/(_) You can operate the receiver with the supplied remote.
Name [] Function Name MOVIE Press to select sound fiehts (MOVIE). [] MUSIC Press to select sound fields [] Press to select A.F.D. mode. 2CH Press to select 2CH STEREO mode. AMP MENU Press to display the menu of the receiver. Then, use 4", ,I,, <., ,*"and @ ([]) to perform menu operations. [] AUTO CAL Press to activate the Auto Calibration function (page 27). [] D.TUNING Press to enter direct tuning mode. D.SKIP Press to skip a disc when using a multi-disc changer.
Name [] RETURN/ EXIT o'% Function Press to Name [] return to the previous menu. exit the menu while the menu o1"on-screen guide of the V(R, DVD player, satellite tuner or Blu-ray disc player is displayed on the TV screen. Press RETURN/EXIT 0'% and TV ([]) at the same time to retm'n to the previous menu or exit the TV's menu while Press to select track numbers over 10 of the V(R, satellite tuner or (D player.
1" Installingspeakers O This receiver speaker allows system. you to use a 5.1 chalmeI To fnlIy enjoy multi cham_el surround speakers sound (two front speakers, and two sun'ound (5.1 channel).
Before you install the speaker be sure to attach the supplied and sub woofer, prevent vibration or movement illustration below'. Example speaker You can install your speakers on the wall. foot pads to Prepare screws (not supplied) that are suitable for the hook on as shown in the of HT-SS2000 the back of each speaker. See the illustrations below.
Example of installing the speakers on the wall Hook on the back of the speaker m, Notes • Use screws that are suitable for the wall material and strength. As a plaster bom'd wall is especially fragile, attach the screws secm'ely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regm'ding the wall material or screws to be used.
2: Connectingspeakers [] °@°[]I °@°[] O Speaker cord (supplied) _"qFront speaker (Left) []Front (Right) r_] Center 16_8 speaker speaker r_] Sm'rotmd speaker (Left) r_Sm'round speaker (Right) I-dSub woofer
Note on speaker The connector cords of the speaker cords are the Note on speakers To connect same color as the speaker jack to be connected. check When speaker connecting a speaker cord, be sure to connector to the speaker match the colored jack on the receiver: the speakers correctly, the type of speakers be sure to by referring to the label:": at the rear panel or bottom of m, the speakers.
3: Connectingtheaudio/ videocomponents The t_Ilowing illustration shows how to connect audio components such as Super Audio CD player or CD player. Super AudioCD player/ CD player This section describes how" to hook up your components to this receiver. Before you begin, refer to "Component to be com_ected" below for the pages which describe how" to connect the audio/video components. After hooking up all your components, proceed to "4: Connecting the antennas" (page 23).
If you connect a DVD recorder Be sure to change the factory setting of the The following illustration shows how" to connect video components such as DVD player, DVD recorder, satellite tuner or VCR. Satellite tuner/Set-top VIDEO 1 inpm button on the remote so that you can use the button to control yore" DVD recorder. For details, see "Changing button assignments" (page 59). DVD recorder box Audio signal TV Audio signal Audio signal _O Audio signal DVD player =," '_ D.
Notes • You cannot do recording on the DVD recorder 02" VCR via this receiver. For details, refer to the operating instructions recorder or V(R. supplied with the DVD • To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. • As this receiver does not have analog audio input jack for DVD, connect your DVD player to the DIGITAL COAX IN DVD jack on the receiver.
HDMI feature A digital audio can be output HDMI is the abbreviated name for HighDefinition Multimedia Interface. It is an interface signals which transmits in digital the receiver. Digital. signals transmitted from the speakers This signal DTS and linear supports by- HDMI connected to m, PCM. video and audio format. Satellite tuner DVD player Audio/video signal Audio/video signal Blu-ray disc player Audio/video signal TV, projector, etc. Audio/video signal L .............
If you connect player Be sure to change VIDEO a Blu-ray the factory 2 input button setting to control the connected of the technology (HDCP), so that sound your Blu-ray button from the HDMI distorted Notes on HDMI connections cable with the HDMI logo is output HDMI from the SPEAKERS IN jack jacks OUT jack. It is not output and from any other audio jacks. • Video signals • When from the HDMI OUT jack.
4: Connectingthe antennas 0 Connect the supplied FM wire antenna. AM loop antenna FM wire antenna and m, (supplied) AM loop antenna (supplied) _ The shape of the co_mector vm'ies depending on the area code of this receiver. Notes • To preYent noise pickup, keep the AM loop antenna away from the receiver and other components. • Be sure to fully extend the FM wire ante_ma. • After connecting the FM wire antemla, keep it as horizontal as possible.
5: Preparingthe receiver andtheremote Before using the receiver the receiver by performing the following procedure. This procedure can also be used to return Connect the AC power cord to a wail outlet. AC power cord for the first time, initialize settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation. 1,2 1 To the wall outlet 2 Press I/_ to turn off the receiver. Hold down "CLEARING" a while, for 5 seconds.
6: Calibratingthe Insert two R6 (size-AA) batteries RM-AAU017 remote commander. Observe the ton'cot batteries. polarity in the O appropriate settings automatically m, when installing (AUTO CALIBRATION) o. This receiver Cinema is equipped (Digital Technology which Auto Calibration) allows you to perform follows: automatic • Check the comaection and the receiver. • Adjust • Measure listening Notes with DCAC the speaker between calibration as each speaker level.
Example: HT-SS2000 Optimizer Before you perform up and connect the Auto the speakers Calibration, (page set 13, 16). • The AUTO CAL MIC jack is used for the supplied optimizer microphone only. Do not connect Doing other microphones so may damage to this jack. the receiver and the microphone. • During the calibration, out of the speakers attention effect the sound that comes is very loud. Pay to the presence of children or to the on your neighborhood.
Tip When Auto Calibration starts: Stand some distance from the speakers and the listening position to avoid measm'ement failm'e, This is because test signals are output from the ff_ m, speakers during measurement. Avoid making noise to get a more accm'ate measm'ement. "_ Input To cancel Auto Calibration The Auto canceled Calibration function will be when you do the following during the measm'ement process: - Press I/(_.) or MUTING. - Press input buttons on the remote SELECTOR on the receiver.
Press e/_ repeatedly to select Error code Cause and remedies the item. Then, press 1_). ERROR SR 33 Either the left 02"right surround speakers is not connected. 2 Item Explanation RETRY Performs the Auto Calibration again. SAVE Saves the measurement results and exits the setting process. WARN (HK 3 Displays wm'ning concerning the measurement results. See "When you select 'WARN CHK'"' (page 28). ERROR SW 33 Sub woofer is not connected. (onnect the sub woofer to the SUBWOOFER terminal.
Warning code Explanation WARN 43 The distance and position of a sub woofer calmot be detected. This may be caused by noise. Try to perform the Auto Calibration in a quiet environment. NO WARN There is no warning information. "PHASE" You can check the phase of each speaker " ll FL function if) to suit your preference. " Select "8-A. CAL" in the amplifier menus. For details on adjusting the parameters, see " through menus" (page 34) and of the menus" (page 35). • A.
7: Adjustingthe speaker levelsandbalance 5 Press t,14, repeatedly to select "T. TONE Y". The test tone is output in seqnence (TEST TONE) Front let1 -* You can adjust the speaker Sm'round right -* Sub woofer while listening listening levels and balance to the test tone from your position. Tip The receiver employs a test tone with a frequency centered at 800 Hz.
Selectinga component Selected input [Display] Components that can be played back DMPORT [DMPORT] DIGITAL MEDIA PORT adapter connected to DMPORT jack VIDEO 1 [VIDEO 1] V(R. etc.. connected to the VIDEO 1jack VIDEO 2 [VIDEO 2/BD]* Blu-ray disc player, etc., connected to the VIDEO 2/BD jack DVD [DVD] DVD player, etc., connected to DVD jack SAT [SAT] Satellite tuner, set-top box, etc., connected to SAT jack TV [TV] TV_ etc.
Listening/Watching a component 3 ..... - 3 ,_ _u ,o 5 NNNN N Notes • The operation is described for a Sony Super Audio (D player. • Refer to the operating instructions supplied with the Super Audio CD player or CD player. 1 2 3 format from all speakers (multi chalmel). Refer to page 44 for details. 32Ge Turn on the receiver. Press SA-CD/CD. You can also use INPUT SELECTOR on the receiver to select "SA-CD/CD". Tips • You can select the sound fiehl to suit the music. Refer to page 46 for details.
3 7 Notes • Refer to the operating instructions supplied with the TV and DVD player. • Check the following if you cannot listen to multi channel sound. 7 1 Turn on the TV and DVD player. 2 Turn on the receiver. 3 Be sure this receiver is connected to the DVD player via a digital connection. Be sure the digital audio output of the DVD player is set up properly. Press DVD. You can also use INPUT 4 disc to be played, if necessary. • You can select the sound field to suit the movie/music.
To return to the previous display Press _,. Navigating through menus By using the amplifier various adjustments menus, you can make to customize the receiver. 2-6 1 Press AMP MENU. "_I-LEVEL" appears 2 Press tit repeatedly to select the menu you want. 3 4 Press (_ or* menu. to enter the Press tit repeatedly to select the parameter you want to adjust. 5 6 on the display. Press (_ or * to enter the parameter. Press t/t repeatedly to select the setting you want.
The following menu. menus, options are available For details on navigating in each through see page 34. Menu Parameters [Display] [Display] LEVEL Test tone a) [i -LEVEL] [T. TONE] (page 38) Front speaker balance a_ [FRT BALl BAL. L +1 to BAL. L +10. BALANCE BALANCE, BAL. R + 1to BAL.
Menu Parameters [Display] Settings Initial setting [Display] AUDIO [5-AUDIO] (page 40) Digital audio input decoding priority a! [DEC. PRI.] DE(. DE(. AUTO for: VIDEO 1, VIDEO 2/BD, SAT, TV, DVD; DEC. P(M for: SA-(D/CD Digital broadcast language selection a/ [DUAL] DUAL M/S. DUAL M, DUAL S. DUAL M+S DUAL M Synchronizes audio with video output a) [A.V. SYNC.] A.V.SYNC. 0 to A.V.SYN(. A.V.SYN(. AUTO, DEC. PLM 20 Digital audio input assignment a! For details, see page 57 [D.
Menu [Display] Parameters [Display] Settings Initial setting A. (AL [8-A. CAR] Auto calibration on/off a>e) [AUTO CALl A.CAL YES, A.CAL NO A.CAL NO (page 29) Calibration load a)d) [CAL LOAD] LOAD NO, LOAD YES LOAD YES a_For details, refer to the page in the parentheses. b)The surround effect is not available for 2CH STEREO and A.F.D. mode. c)When you select this parameter, the "HDMI" indicator flashes in the display. diWhen you set "CAL LOAD" in A.
• D. RANGE (Dynamic range compressor) Adjustingthe level Lets you compress the dynamic range of the (LEVELmenu) sound track. This may be useful when you want to watch movies at low volumes late at You cm_ use the LEVEL menu to adjust the balance and level of each speaker. Select "l-LEVEL" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 34) and "'Overview of the menus" (page 35). night.
Adjustingthetone Settings for the surround (TONE menu) sound You can use the TONE tonal quality (bass/treble menu to adjust level) (SUR menu) the of the front You can use the SUR menu to select the sound speakers. Select "2-TONE" in the amplifier details on adjusting "Navigating "Overview through menus. the parameters, menus'" of the menus" For see (page 34) and (page 35). field you want for your listening pleasure. Select "3-SUR" menus.
Settings for the tuner Settingsfor the audio (TUNERmenu) (AUDIO menu) You cm_ use the TUNER station receiving Select "4-TUNER" For details mode. through You can use the AUDIO settings in the amplifier on adjusting "Navigating menu to set the FM menus. the parameters, menus" see (page 34) and "'Overview of the menus" TUNER menu parameters for the audio to suit your preference. Select "'5-AUDIO" in the amplifier details the parameters, on adjusting "Navigating (page 35).
• DUAL (Digital broadcast language selection) Lets you select the language you want to Iistan to during digital This featm'e only functions for Dolby • DUAL Sound broadcast. Digital M/S (Main/Subt You can use the VIDEO will be output the front left speaker the sub language • DUAL Select "'6-VIDEO" through the details menus. For the parameters, menus" of the menus" see (page 34) and (page 35). 3 will be output. will be output.
• CONTROL (HDMI CONTROL)* Lets you turn the HDMI CONTROL function on or off. For details, refer to the HDMI CONTROL Guide supplied with the receiver. Settingsfor the system (SYSTEMmenu) You can use the SYSTEM * When you select this parameter, the "HDMI" indicator flashes in the display. distance of the speakers menu to set the connected to this system. Select "7-SYSTEM" in the amplifier For details on adjusting "Navigating "Overview SYSTEM through menus" of the menus" menus.
Tips • SUR POS. (Surround position) • If you set "CAL LOAD" in A. CAL menu to "LOAD YES", you can adjust the speakers distance in 0.01 meter (1 inch) increment. Lets you specify • The distance between the center speaker and the listening position [] cannot be more than 1.5 meters (5 feet) closer than the one between the listening position and the front speaker [_.
Tip Sun'ound speaker position is designed specifically for implementation of the (INEMA STUDIO EX modes. For other sound fields, speaker position is not so critical. Those sound fields were designed m_der the premise that the surround speakers would be located behind the listening position, but presentation remains fairly consistent even with the surround speakers positioned at a rather wide angle.
Types of A.F.D. mode Decoding mode A.F.D. mode [Display] Multi channel audio after decoding Effect (Detecting automatically) A.F.D. AUTO [A.F.D. AUTO] (Detecting automaticallv Presents the sound as it was recorded/ encoded without adding any sun'omad effects. However, this receiver will generate a low frequency signal for output to the sub woofer when there is no LFE signals. Dolby Pro Logic PRO LOGIC [DOLBY PL] 4 channel Performs Dolby Pro Logic decoding.
Selectinga preprogrammed soundfield You can take advantage simply by selecting programmed exciting sound fields. and powerful and concert of sun'ound sound one of the receiver's They bring prethe sound of movie theaters halls into your home. Press MOVIE repeatedly to select a sound field for movies or press MUSIC repeatedly to select a sound field for music. You can also use SOUND FIELD +/- on the receiver. For details, available" 46_8 see "Types of sound field (page 47).
Types of sound field available Sound field Sound field for [Display] Movie CINEMA STUDIO EX A [( .ST.EX A] Reproduces the sound characteristics of the Sony Pictures Entertainment "(ary Grant Theater" cinema production studio. This is a standexd mode, great for watching almost any type of movie. CINEMA STUDIO EX B [C.ST.EX B] Reproduces the sound characteristics of the Sony Pictures Entertainment "Kim Novak Theater" cinema production studio.
Notes • The effects provided by-the virtual speakers may cause increased noise in the playback signal. • When listening with sound fields that employ the virtual speakers_ you will not be able to hear any sound coming directly from the surround speakers. • This function does not work for signals with a sampling frequency of more than 48 kHz. Usingonly thefront speakersandsubwoofer Tip from the front left!right You can identify the encoding format of DVD software etc..
Resetting soundfields to the initial settings Be sure to use the buttons on the receiver for this operation. 1,2 Listeningto FM/AMradio You can listen to FM and AM broadcasts 2 through the built-in tuner. Before make sm'e you have connected AM antennas to the receiver operation. the FM and {page 23). Tip 1 2 Press I/_ to turn off the receiver. While holding down SOUND FIELD +, press I/_. "S.F. CLR.
Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING You can enter directly the frequency of a station by using the numeric buttons. -. Press TUNING + to scan from low to high; press TUNING - to scan from high to low. The receiver stops scanning whenever a station is received.
Presetting radio stations You can preset AM stations. stations up to 30 FM stations 4 Press the numeric buttons to select a preset number. You can also press the PRESET and 30 PRESET Then you can easily ttme in the you often listen to. - to select If "MEMORY" goes out before select number, the preset + or a preset number. you start again from step 3. 5 Press ENTER. The station number.
Usingthe RadioData System(RDS) (Models of area code CEL, CEK only) This receiver (Radio stations Numeric buttons also allows you to use RDS Data System), with the regular display which enables to send additional program radio information signal. along You can RDS information. Notes ENTER • RDS is operable only for FM stations. • Not all FM stations provide RDS service, nor do they provide the same type of services.
While receiving an RDS station, press DISPLAY repeatedly. Each time you press the button.
• COAX IN Specifies the digital DIGITAL COAX digitalandanalogaudio (IN MODE) Specifies DIGITAL You can select the audio input mode setting when you connect "l-LEVEL" appears to enter the Press #/+ repeatedly to select "IN MODE". 5 Press (_) or. parameter. to enter the Press 4,/_ repeatedly to select the audio input you want. To return to the previous display Press I,.
Enjoyingthe DIGITAL MEDIA PORT You can listen to the sound (DMPORT) component The DIGITAL MEDIA PORT on the receiver. MEDIA allows you to enjoy system PORT (DMPORT) sound from a network such as a portable audio source or By connecting adapter a DIGITAL (not supplied), from the connected receiver. For details, supplied MEDIA PORT adapter from the through screen by connecting MEDIA the DIGITAL to the DMPORT You can also view the images DIGITAL computer.
To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Press DMPORT. You can also use the INPUT /// Press and hold both sides of the connector on the receiver 2 and then pull out the connector. adapter is fragile, be sm'e to handle with care when placing or moving the receive*'. SELECTOR "DMPORT". Start playback of the connected component.
Listeningto digitalsound fromother inputs 5 6 (DIGITALASSIGN) You can reassign digital OPTICAL or COAXIAL IN, SAT IN) signals to another they are not cmTently For example, • Connect the sound the optical "'VD1 OPT" "'D. ASSIGN" source for using the OPTICAL IN jack output jack of the DVD player to the OPTICAL the receiver. • Assign input when 7 being used.
Assignable inputs for digital audio input The initial underscore. setting is marked Usingthe SleepTimer with an You can set the receiver to turn off Digital audio input [Display] Assignable inputs Display automatically VIDEO 1 OPTICAL VIDEO 1 VD1 VD1 Press SLEEP repeatedly while the power is on.
Categories and the corresponding buttons Categories Changing button assignments Press VCR (command mode VTR 3) a) 1 VCR (command mode VTR 2) a) 2 DVD player/DVD You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD recorder to the VIDEO 1 jacks on the receiver, you can set the VIDEO 1 button on this remote to control the DVD recorder. 1 Hold down the input button which you want to change assignment.
• HDMI (High-Definition Multimedia Interface) HDMI is an interface and audio Glossary HDMI connection definition audio encoding/decoding developed consists technology by Dolby Laboratories, of front (Left/Right), (Left/Right) and sub woofer information reproduced surround channels. is recorded is delivered It is a equipped sound with than with Dolby degradation. Contents Protection), technology technology converts 2 channel stereo recorded audio into 5.1 channel for playback.
On placement Precautions • Place the receiver adequate and prolong On safety any solid object cabinet, unplug checked by qualified operating or liquid fall into the the receiver and have it personnel before power is identical check that the with your local supply. The operating voltage is indicated on the nameplate on the back of the receiver.
If color irregularity again... Place the speaker set. further is observed Troubleshooting away from the TV If you experience difficulties If howling occurs Reposition the speakers volume on the receiver. troubleshooting o1"turn down any of the following while using the receiver, use this guide to help you remedy the problem. the Audio On cleaning Clean the cabinet, panel, soft cloth slightly moistened detergent solution.
Thereis nosoundfrom one of the front speakers. • Make sure you have com_ected to both the L and R jacks of an analog component, and not only to either the L or R ,jack. Use an audio cord (not supplied). The source sound input to the HDMI jack on the receiver is not output from the TV speaker. • Check the setting of HDMI AUDIO in the VIDEO menu (page 41). • Check the HDMI com_ection. • You cannot listen to the Super Audio CD by connecting HDMI.
Video Radio There is no picture or an unclear picture appears on the TV screen or monitor. • Make sm'e you have connected the video output of your video component to the TV. • Move your audio components away from the TV. stations • Check securely. antemm, • The signal tuning). • Make strength {when tuning have been preset by scanning RDS does The FM reception is poor. • Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below.
Error messages If there is a malfunction, message. the display shows You can check the condition system by the message. consult Specifications Refer to the following table to solve the problem. persists, a of the If any problem your nearest Sony dealer. AUDIO POWER SPECIFICATIONS If an error message appears while you perform Auto Calibration, see "When error codes POWER OUTPUT AND TOTAL HARMONIC DISTORTION: appear" (Models (page 28) to solve the problem.
1)Measured under the following conditions: Area code Power requirements General Power reqnirements U, UC 120 V A(, 60 Hz Area code Power requirements CEL, (EK 230 V A(, 50 Hz U, U( 120 V AC, 60 Hz (EL, CEK 230 V AC, 50160 Hz 2)Reference power output for front, center, sm'round speakers and sub woofer. Depending on the sound field settings and the source, there may be no sound output.
Dimension (w/h/d) Front/surround (Approx.) Mass (Approx.) speakers 92 x 538 x 74 mm (3 5/8 x 21 1/4 x 3 inches) 300 x 1,229 (max.) x 300 mm (11 7/8 x 48 1/2 (max.) x 11 7/8 inches) with stand Center speaker 260 x 91 x 80 mm (10 1/4 x 3 5/8 x 3 1/4 inches) Front speakers 0.5 kg (1 ib 2 oz) (?enter speaker 0.7 kg (1 lb 9 oz) Surround 0.
Index Numerics I 2 channel IN MODE 48 2CH STEREO 5.1 channel 48 T Initial 54 setup TEST 13 A CALIBRATION AUTO FORMAT 25 DIRECT 44 automatically A. CAL AUDIO 29 40 LEVEL 38 connecting 21 VIDEO C Muting CD player connecting to preset stations 52 connecting 19 V VCR 41 connecting 19 31 R 18 playback 50 42 TONE 39 TUNER 40 disc player 49 directly TV SUR 39 SYSTEM B 23 Tuning Menu AUTO BIu-ray 30 connecting M (A.F.D.
