Startup Guide

2 Connecting with a TV
Audio signal
Blu-ray Disc™ player,
cable box or satellite
box, etc.
Video signal
HDMI cable (supplied)
YES
Video signal
HDMI cable
(supplied)
Optical digital cable (not supplied)
Blu-ray Disc player,
cable box or satellite
box, etc.
Audio signal
NO
Is the HDMI IN jack on your TV labeled “ARC” ?
Tip
•When your TV does not have both an OPTICAL OUT jack and an HDMI IN jack, refer to “Connecting a TV or Portable Audio Device via the ANALOG IN Jack” in the Operating Instructions (separate document) for a connection
method.
Note
•Make sure that the cables are firmly inserted.
3 Setting up the remote control
1 Deciding the installation position
Subwoofer
Bar Speaker
Speaker pad (supplied)
To install the subwoofer horizontally
Note
•Do not place magnetic cards on the system or near the system.
•Do not place metal objects other than a TV around the system. Wireless functions may become unstable.
Sound Bar
Startup Guide
4-687-808-13(1)
HT-MT500
What’s in the box
Bar Speaker (1) Subwoofer (1) Remote control (1)
R03 (size AAA) battery (2) HDMI cable (supports the
specification equal to
High Speed HDMI cable
with Ethernet) (1)
AC adapter (1)
U.S/Canada models
AC power cord (mains lead) (1)
U.S/Canada models
AC power cord (mains lead) for
the subwoofer (1)
Australia/New Zealand models
AC power cord (mains lead) (1)
Australia/New Zealand models
AC power cord (mains lead)
for the subwoofer (1)
Speaker pad for the subwoofer
(4)
Operating Instructions
Startup Guide (this document)
About the operation method of the system
Connect this system and the TV with the HDMI cable (supplied) to display the operation screen of
the system on the TV.
Refer to the Operating Instructions
(separate document) for what you
can do with the system and the
network settings.
Continued on back page
© 2017 Sony Corporation Printed in Malaysia