Operating Instructions

7 Reattach the rear cap using the wrench (supplied).

8 Secure the speaker to the bracket with the screw in step 3 using hole 4.

CAUTION

• Do not place any load on the bracket, other than that of the speaker. If you do so, the speaker may fall and cause

injury or property damage.

• Do not hang from the speaker or the bracket, as it may fall on you and cause serious injury.

• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach

the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where

reinforcement is applied.

• Contact a screw shop or installer regarding the wall material or screws to be used.

• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or

improper screw installation, natural calamity, etc.

Notes