masterpage:Right lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB01COV_HTDDW860-CEL.fm] GB01COV_HT-DDW860-CEL.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB02REG_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 2 Monday, March 29, 2004 10:42 AM WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB01COV_HTDDW860-CELTOC.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 3 Monday, March 29, 2004 10:42 AM Table of Contents Getting Started 1: Check how to hookup your components .......................................4 1a: Connecting components with digital audio output jacks ........... 6 1b: Connecting components with multi channel output jacks..........
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 4 Monday, March 29, 2004 10:42 AM Getting Started 1: Check how to hookup your components Steps 1a through 1c beginning on page 6 describe how to hook up your components to this receiver. Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 6 Monday, March 29, 2004 10:42 AM . 1a: Connecting components with digital audio output jacks Hooking up a DVD player or satellite tuner For details on the required cords (A–G), see page 5. 1 Connect the audio jacks.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 7 Monday, March 29, 2004 10:42 AM 2 Connect the video jacks.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 8 Monday, March 29, 2004 10:42 AM Hooking up a Super Audio CD/CD player For details on the required cords (A–G), see page 5.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 9 Monday, March 29, 2004 10:42 AM 1 Connect the audio jacks. If your DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect it to this receiver’s MULTI CH IN jacks to enjoy the multi channel sound. Alternatively, the multi channel input jacks can be used to connect an external multi channel decoder.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 10 Monday, March 29, 2004 10:42 AM 2 Connect the video jacks. (Except for models of area code CEL, CEK) The following illustration shows how to connect a DVD player with COMPONENT VIDEO (Y, PB/CB/B-Y, PR/CR/R-Y) output jacks. Connecting a TV with component video input jacks allows you to enjoy higher quality video.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 11 Monday, March 29, 2004 10:42 AM 1c: Connecting components with only analog audio jacks Getting Started Hooking up audio components For details on the required cords (A–G), see page 5.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 12 Monday, March 29, 2004 10:42 AM Hooking up video components If you connect your TV to the MONITOR VIDEO OUT jack, you can watch the video from the selected input (page 20). For details on the required cords (A–G), see page 5.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 13 Monday, March 29, 2004 10:42 AM 2: Connecting the antennas Getting Started Connect the supplied AM loop antenna and FM wire antenna.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 14 Monday, March 29, 2004 10:42 AM 3: Connecting speakers Connect your speakers to the receiver. This receiver allows you to use a 6.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel).
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 16 Monday, March 29, 2004 10:42 AM Performing initial setup operations 4: Connecting the AC power cord Connect the AC power cord to a wall outlet. UND BACK b + To a wall outlet NTER Before using the receiver for the first time, initialize the receiver by performing the following procedure.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 17 Monday, March 29, 2004 10:42 AM x 5: Setting up the speakers 1 2 3 Press ?/1 to turn on the receiver. Press MAIN MENU repeatedly to select “ SET UP ”. x Press or repeatedly to select the parameter you want to adjust. Initial setting: 3.0 m Lets you set the distance from your listening position to the surround speakers.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 18 Monday, March 29, 2004 10:42 AM Tip The receiver lets you to input the speaker position in terms of distance. However, it is not possible to set the center speaker further than the front speakers. Also, the center speaker cannot be set more than 1.5 meters closer than the front speakers.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB03CON_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 19 Monday, March 29, 2004 10:42 AM 7: Adjusting the speaker levels and balance — TEST TONE Listening to the sub woofer Adjust the speaker levels and balance while listening to the test tone from your listening position. Use the remote for the operation.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB04BSC_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 20 Monday, March 29, 2004 10:42 AM To use the headphones Amplifier Operation Selecting the component 1 Press input buttons to select the input.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB04BSC_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 21 Monday, March 29, 2004 10:42 AM Listening to multi channel sound — MULTI CH IN Press MULTI CH IN. Press again to cancel the MULTI CH IN function. Note You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (see page 13).
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB04BSC_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 22 Monday, March 29, 2004 10:42 AM Direct tuning You can enter the frequency of the station you want directly. Use the remote for the operation. 1 Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. Tip You can also use TUNER FM/AM on the receiver. 2 3 Press D.TUNING.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB04BSC_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 23 Monday, March 29, 2004 10:42 AM Presetting radio stations 1 The last received station is tuned in. 2 Presetting radio stations 1 2 3 Tune in the station that you want to preset using Automatic Tuning (page 21) or Direct Tuning (page 22). Press MEMORY. “MEMORY” appears in the display for a few seconds.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB04BSC_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 24 Monday, March 29, 2004 10:42 AM Notes Using the Radio Data System (RDS) (Models of area code CEL, CEK only) This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can also display RDS information.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB04BSC_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 25 Monday, March 29, 2004 10:42 AM Description PHONE IN Programs where members of the public express their views by phone or in a public forum TRAVEL Programs about travel. Not for announcements that are located by TP/TA LEISURE JAZZ Programs on recreational activities such as gardening, fishing, cooking, etc.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB04BSC_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 26 Monday, March 29, 2004 10:42 AM About the indications in the display 1 2 3 SW LFE SP A ; DIGITAL EX ;PRO LOGIC II DTS-ES SP B SLEEP OPT COAX L C R SL S SR SB 4 qs 5 6 7 NEO:6 D.RANGE RDS MEMORY STEREO MONO 9 qa q; 8 qd A SW: Lights up when the audio signal is output from the SUB WOOFER jack.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB05SND_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 27 Monday, March 29, 2004 10:42 AM Enjoying Surround Sound Using only the front speakers and sub woofer — 2CH STEREO Press 2CH. “2CH ST.” appears in the display and the receiver switches to the 2CH STEREO mode. — AUTO FORMAT DIRECT The Auto Format Direct (A.F.D.) mode allows you to select the decoding mode you want for your audio sound. A.F.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB05SND_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 28 Monday, March 29, 2004 10:42 AM Enjoying stereo sound in multi channel (2 channel decoding mode) This mode lets you specify the type of decoding for 2 channel audio sources. This receiver can reproduce 2 channel sound in 5 channels through Dolby Pro Logic II; 6 channels through DTS Neo:6 or 4 channels through Dolby Pro Logic.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB05SND_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 29 Monday, March 29, 2004 10:42 AM x C.ST.EX C (CINEMA STUDIO EX C) DCS x CONCERT (LIVE CONCERT) Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage. This mode is ideal for watching musicals or films where orchestra music is featured in the soundtrack. Reproduces the acoustics of a 300-seat live house.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB05SND_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 30 Monday, March 29, 2004 10:42 AM Selecting the surround back decoding mode — SURR BACK DECODING This function lets you select the decoding mode for the surround back signals of the multi channel input stream. By decoding the surround back signal of DVD software (etc.) recorded in Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete 6.1, etc.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB05SND_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 31 Monday, March 29, 2004 10:42 AM How to select the surround back decoding mode You can select the surround back decoding mode you want according to the input stream. When you select “SB AUTO” When the input stream contains the 6.1 channel decode flaga), the appropriate decoder is applied to decode the surround back signal.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB06ADV_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 32 Monday, March 29, 2004 10:42 AM Advanced Adjustments and Settings Switching the audio input mode for digital components — INPUT MODE You can switch the audio input mode for components which have digital audio input jacks. 1 2 Press input buttons to select the input. Press INPUT MODE repeatedly to select the audio input mode.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB06ADV_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 33 Monday, March 29, 2004 10:42 AM x CTR XXX dB (Center speaker level) x SUR.L. XXX dB (Surround speaker (left) level) x SUR.R. XXX dB (Surround speaker (right) level) x SB XXX dB (Surround back speaker level) Use the buttons on the receiver for the operation. 1 2 Press ?/1 to turn off the power. While holding down 2CH, press ?/1. “SF. CLR.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB06ADV_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 34 Monday, March 29, 2004 10:42 AM Adjusting the tone You can adjust the tonal quality (bass, treble level) of the front speakers using the TONE menu. 1 2 3 Start playing a source encoded with multi channel surround effects (DVD, etc.). Press MAIN MENU repeatedly to select “ TONE ”.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB06ADV_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 35 Monday, March 29, 2004 10:42 AM x DEC. XXXX (Digital audio input decoding priority) Advanced Adjustments and Settings Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. The initial setting is “DEC. AUTO” for VIDEO 2 and “DEC. PCM” for DVD and SA-CD/CD.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB070TH_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 36 Monday, March 29, 2004 10:42 AM Tips • You can select the character type as follows by pressing + or – repeatedly. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press + or – repeatedly until a blank space appears in the display.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB070TH_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 37 Monday, March 29, 2004 10:42 AM Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Use the remote for the operation. 1 2 Selecting the speaker system You can select the front speaker system you want to use. Press ALT to light up the button. Press SLEEP while the power is on.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB070TH_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 38 Monday, March 29, 2004 10:42 AM Recording Before you begin, make sure you have connected all components properly. Recording on an audio tape or MiniDisc Recording on a video tape You can record from a VCR, a TV or a DVD using the receiver. You can also add audio from a variety of audio sources when editing a video tape.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB08REM_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 39 Monday, March 29, 2004 10:42 AM Operations Using the Remote RM-PP860 You can use the remote RM-PP860 to operate the components in your system. Remote button description Before you use your remote TV ?/1 Inserting batteries into the remote wf wd Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB08REM_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 40 Monday, March 29, 2004 10:42 AM The tables below show the settings of each button. Remote Button Operations Function Remote Button Function D.TUNING qh Receiver Enters direct tuning mode. A.F.D. w; Receiver Selects the decoding mode for audio sound.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB08REM_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 41 Monday, March 29, 2004 10:42 AM rh rg TV ?/1 ?/1 AV ?/1 RM SET UP P wg Remote Button Operations Function PRESET/ CH/ Receiver Selects preset stations. D.SKIP +/– wl TV/VCR/ Selects preset Satellite tuner channels. SYSTEM STANDBY SLEEP VIDEO1 VIDEO2 wh AV1 AV2 MD/TAPE SA-CD/CD TUNER DVD wj MULTI CH 2CH A.F.D.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB08REM_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 42 Monday, March 29, 2004 10:42 AM Remote Button Operations Function Remote Button Operations Function TUNER wj Receiver To listen to radio programs. m/M ra TV CH +/– ej TV Selects preset TV channels. CD player/ VCD player/ DVD player LD player/ MD deck Searches tracks in the forward or backward direction.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB08REM_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 43 Monday, March 29, 2004 10:42 AM Selecting the command mode of the remote Set the remote command mode using the RM SET UP button and the remote command mode buttons. Selecting the command mode You can switch the command mode (AV1 and AV2) of the remote.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB08REM_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 44 Monday, March 29, 2004 10:42 AM To cancel programming Press RM SET UP during any step. The remote automatically exits the programming mode. To activate the input after programming Press the programmed button to activate the input you want.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB08REM_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB08REM_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB09ADD_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 47 Monday, March 29, 2004 10:42 AM If you encounter color irregularity on a nearby TV screen Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources If color irregularity is observed..
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB09ADD_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 48 Monday, March 29, 2004 10:42 AM Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. There is no sound or only a very low-level sound no matter which component is selected.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB09ADD_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.book Page 49 Monday, March 29, 2004 10:42 AM Dolby Digital or DTS multi channel sound is not reproduced. • Check that the playing DVD, etc. is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output) of the connected component.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB09ADD_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.book Page 50 Monday, March 29, 2004 10:42 AM Error messages If there is a malfunction, the display shows a message. You can check the condition of the receiver by the message. Refer to the following table to solve the problem. DEC. EROR Appears when the signal which the receiver cannot decode (ex. DTS-CD) is input when “DEC. XXXX” is set to “DEC. PCM”.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB09ADD_HTDDW860-CEL.fm] masterpage:Right GB01COV_HT-DDW860-CEL.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB09ADD_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB09ADD_HTDDW860-CEL.fm] masterpage:Right-3 (3 column) GB01COV_HT-DDW860-CEL.book Page 53 Monday, March 29, 2004 10:42 AM List of button locations and reference pages How to use this page Use this page to find the location of buttons that are mentioned in the text.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB01COV_HTDDW860-CELIX.fm] masterpage:Left GB01COV_HT-DDW860-CEL.
GB01COV_HT-DDW860-CEL.
lename[E:\SEM_Janet\Data_HTDDW860\Revision_data\J9040000_4255298113DDW860CEL\4255298113\GB10BKC_HTDDW860-CEL.fm] masterpage:Left GB01COV_HT-DDW860-CEL.
