Sound Bar Operating Instructions HT-CT380/CT780
WARNING The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles).
Apple, the Apple logo, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. “PlayStation®” is a registered trademark of Sony Computer Entertainment Inc. Other trademarks and trade names are those of their respective owners.
About these operating instructions • The instructions in these Operating Instructions describe the controls on the remote control. You can also use the controls on the main unit if they have the same or similar names as those on the remote control. • Some illustrations are presented as conceptual drawings, and may be different from the actual products.
Table of Contents Connecting Startup Guide (separate document) About these operating instructions .......................... 4 Listening Listening to sound from a TV, Blu-ray Disc™ player, cable/ satellite box, etc. ................. 6 Listening to music from a BLUETOOTH device ............. 6 Sound Adjustment Enjoying sound effects (Sports mode, etc.) .......................... 9 BLUETOOTH Functions Controlling the system using a smartphone or tablet device (SongPal) .................
Listening Listening to music from a BLUETOOTH device Listening to sound from a TV, Blu-ray Disc™ player, cable/satellite box, etc. Press INPUT repeatedly. When you press INPUT once, the current device appears on the front display, then each time you press INPUT, the device changes cyclically as follows.
Tip Compatible remote devices Remote devices with a built-in NFC function (OS: Android 2.3.3 or later, excluding Android 3.x) 1 Download, install, and start the “NFC Easy Connect” application. Listening to music of the registered device Note 1 2 3 4 Press INPUT repeatedly to display [BT]. The BLUETOOTH indicator (blue) flashes during attempting BLUETOOTH pairing. • The application may not be available in some countries/regions.
Tip • If pairing and the BLUETOOTH connection fail, do the following. – Relaunch “NFC Easy Connect” and move the remote device slowly over the N-Mark. – Remove the case from the remote device if using a commercially available remote device case.
Setting the Night mode Sound Adjustment Enjoying sound effects (Sports mode, etc.) Selecting the sound field Press SOUND FIELD repeatedly until the desired sound field appears on the front panel display. [CLEARAUDIO+] The suitable sound setting is automatically selected for the sound source. [STANDARD] Corresponds to every source. [MOVIE] Sounds are played back with surround effects, and they are realistic and powerful, making them suitable for movies. Press NIGHT to display [N. ON].
5 BLUETOOTH Functions Controlling the system using a smartphone or tablet device (SongPal) “SongPal” is the application to operate the system with your smartphone or tablet, etc. “SongPal” is available from either Google Play or App Store. This function is enabled by setting [BT PWR] to [ON] (page 15). The default setting is [ON]. 6 2 3 Press / (on/standby) on the remote control. The display of the Bar Speaker lights up. Search for “SongPal” with the Android device and download that application.
3 5 Search for “SongPal” with the connected iPhone/iPod touch and download that application. BLUETOOTH Functions 4 Set the iPhone/iPod touch to pairing mode and select this system (HT-CT380 or HT-CT780) from the BLUETOOTH device list on the iPhone/iPod touch. When the connection has been established, the BLUETOOTH indicator (blue) of the Bar Speaker lights up. Run “SongPal” then operate the system with the display of the iPhone/iPod touch.
Viewing Copyright-protected 4K Content (HT-CT780 only) Connecting to a 4K TV and 4K devices To view copyright-protected 4K content, connect the devices via an HDCP 2.2compatible HDMI jack on each end. Copyright-protected 4K content can be viewed only by a connection via HDCP 2.2-compatible HDMI jacks. Refer to the TV’s operating instructions as to whether or not the HDMI jack on the TV is HDCP 2.2compatible. When the TV’s HDMI jack is HDCP 2.
When the TV’s HDMI jack is HDCP 2.2-compatible and not labeled with ARC Connect the optical digital cable to the optical output jack of the TV, and an HDMI cable to the HDCP 2.2-compatible HDMI input jack. Blu-ray Disc player, cable box or satellite box, etc. HDCP 2.2compatible HDMI jack Viewing Copyright-protected 4K Content (HT-CT780 only) HDCP 2.
Settings and Adjustments Using the setup display You can set the following items with the menu. Your settings are retained even if you disconnect the AC power cord (mains lead). 1 2 3 Press MENU to turn on the menu on the front panel display. Press BACK/ (select)/ENTER repeatedly to select the item and press ENTER to decide the setting. Press MENU to turn off the menu. Menu list The default settings are underlined.
Menu items Function [AUDIO] (Audio) [STREAM] (Stream) Shows the current audio stream information. See page 34 on the supported audio formats. [HDMI] [CTRL] (Control for HDMI) • [ON]: Turns on the Control for HDMI function. • [OFF]: Turns off the function. Select this setting when you want to connect a device not compatible with the Control for HDMI function. [S. THRU] (Standby-through) You can set the power saving mode of the HDMI standbythrough function.
Menu items [SYSTEM] (System) [WS] (Wireless sound) Function [A. STBY] (Auto standby) You can reduce power consumption. The system enters standby mode automatically when you do not operate the system for about 20 minutes and the system is not receiving an input signal. • [ON]: Turns on the auto standby function. • [OFF]: Turns off the function. [VER] (Version) The current firmware version information appears on the front panel display. [SYS.
Other Functions Using the Control for HDMI function By using the Control for HDMI function, and connecting a device that is compatible with the Control for HDMI function via an HDMI cable (High Speed type), operation is simplified with the features below. The Control for HDMI function is enabled by setting [CTRL (Control for HDMI)] to [ON] (page 15). The default setting is [ON]. System Power Off When you turn off the TV, the system and the connected device will turn off automatically.
Using “BRAVIA” Sync features The original Sony functions listed below can also be used with products that are compatible with “BRAVIA” Sync. Power save If a “BRAVIA” Sync-compatible TV is connected to the system, the power consumption will be reduced in standby mode by stopping HDMI signal transmission when the TV is turned off with the HDMI standby-through function* of the system set to [AUTO] (page 15). The default setting is [AUTO].
Using the parental lock function Saving power in standby mode Buttons on the Bar Speaker, except for the / (on/standby) button, will be disabled. Check that you have made the following settings: – [CTRL] in [HDMI] is set to [OFF] (page 15). – [S. THRU] in [HDMI] to [AUTO] (page 15). Press INPUT on the Bar Speaker for about 5 seconds when the system is on. [LOCKED] appears on the display. To cancel the parental lock function, press INPUT again for about 5 seconds to display [UNLOCK].
Mounting the Bar Speaker on a wall You can mount the Bar Speaker on a wall. Notes • Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is especially fragile, attach the screws securely to two studs in the wall beam. Install the Bar Speaker horizontally, hung by screws in studs in a continuous flat section of the wall.
2 Prepare screws (not supplied) that are suitable for the holes in the brackets. 4 mm (3/16 in) 4 Hang the Bar Speaker on the screws. Align the holes in the brackets with the screws, then hang the Bar Speaker on the two screws. More than 30 mm (1 3/16 in) 4.5 mm (3/16 in) 10 mm (13/32 in) Hole in the bracket Fasten the screws to 2 studs in the wall. The screws should protrude by 5 mm to 6 mm (approx. 7/32 in). Other Functions 3 777.
Installing the subwoofer horizontally (HT-CT380 only) Place the subwoofer on the right side with the “SONY” logo facing front. Linking the system (Link to the subwoofer) Set up the wireless subwoofer connection again. 1 2 3 4 5 Attach the supplied speaker pads. 6 22GB Press MENU. Select [WS] with (select), then press ENTER. Select [LINK] with (select), then press ENTER. When [START] appears on the display, press ENTER.
Additional Information Precautions On safety • Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. • Do not climb on the Bar Speaker and subwoofer, as you may fall down and injure yourself, or system damage may result. On power sources On heat buildup Although the system heats up during operation, this is not a malfunction.
Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. General The power does not turn on. Check that the AC power cord (mains lead) is connected securely. The system does not work normally. Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes.
Make sure the input source is selected correctly. You should try other input sources by pressing the INPUT button on the remote control several times (page 6). Check that all the cables and cords of the system and the connected device are firmly inserted. The surround effect cannot be obtained. Depending on the input signal and the sound field setting, surround sound processing may not work effectively. The surround effect may be subtle, depending on the program or disc.
radiation is nearby, move the device away from this system. No sound is output from the connected BLUETOOTH device. Make sure that the BLUETOOTH indicator (blue) is lit (page 29). Bring this system and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN equipment, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this system.
Switch the wireless LAN frequency of any nearby Wi-Fi router or personal computer to 5 GHz band. Switch the TV, Blu-ray Disc player, etc. from wireless LAN to wired LAN. Remote control The TV remote control does not work. Install the Bar Speaker so that it does not obstruct the remote control sensor of the TV. Others The Control for HDMI function does not work properly. Check the HDMI connection (refer to the supplied Startup Guide). Set up the Control for HDMI function on the TV.
Sensors of the TV do not work properly. The Bar Speaker may block some sensors (such as the brightness sensor) and the remote control receiver of your TV, or the “emitter for 3D glasses (infrared transmission)” of a 3D TV that supports the infrared 3D glass system or the wireless communication. Move the Bar Speaker away from the TV within a range that allow those parts to operate properly.
Guide to parts and controls For more information, refer to the pages indicated in parentheses. Bar Speaker Front and top panels Remote control sensor Front panel display / (on/standby) button INPUT button (page 6, 19) PAIRING button (page 6) VOLUME +/– buttons N-Mark (page 7) When using the NFC function, touch your NFC-compatible device to the mark.
Rear panel AC power cord (mains lead) UPDATE port (HT-CT780 only) For update only ANALOG IN jack DIGITAL IN (TV) jack HDMI IN 3 jack 30GB HDMI IN 1 jack HT-CT780 is compatible with HDCP 2.2. HDMI IN 2 jack HDMI OUT (ARC) jack HT-CT780 is compatible with HDCP 2.2.
Subwoofer Additional Information On/standby indicator / (on/standby) button LINK button (page 22) AC power cord (mains lead) 31GB
Remote control • When the display brightness is set to “Off,” the display is turned off after the display shows operation status for several seconds. MENU/ (select)/ENTER/BACK buttons (page 14) Press or to select the menu items. Then press ENTER to enter the selection. To return to the previous display, press BACK. (volume) +*/– buttons Adjusts the volume. SW (subwoofer volume) +/– buttons Adjusts the volume of bass sound. (muting) button Turns off the sound temporarily.
Supported audio formats Digital audio input formats supported by the system Audio formats supported by this system are as follows. • Dolby Digital • Dolby Digital Plus* • Dolby TrueHD* • DTS • DTS96/24 • DTS-HD Master Audio* • DTS-HD High Resolution Audio* • DTS-HD Low Bit Rate* • Linear PCM 2ch 48 kHz or less • Linear PCM Maximum 7.1ch 192 kHz or less* Additional Information * It is possible to input these formats only with HDMI connection.
Video formats supported by the system Input/Output (HDMI Repeater block) 3D File 2D Frame packing Side-by-Side (Half) Over-Under (Top-and-Bottom) 4096 × 2160p @ 59.94/60 Hz* 4096 × 2160p @ 50 Hz* 4096 × 2160p @ 23.98/24 Hz** 3840 × 2160p @ 59.94/60 Hz* 3840 × 2160p @ 50 Hz* 3840 × 2160p @ 29.97/30 Hz** 3840 × 2160p @ 25 Hz** 3840 × 2160p @ 23.98/24 Hz** 1920 × 1080p @ 59.
Specifications Bar Speaker (SA-CT380, SA-CT780) Amplifier section POWER OUTPUT (rated) Front L/Front R: 50 W (per channel at 4 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference) SA-CT380: Front L/Front R: 100 Watts (per channel at 4 ohms, 1 kHz) SA-CT780: Front L/Front R: 105 Watts (per channel at 4 ohms, 1 kHz) * HT-CT380: The 1, 2, and 3 jacks are identical. Using any of them makes no difference. HT-CT780: The 1 jack supports HDCP 2.2 protocol. HDCP 2.
General Power requirements 110 V - 240 V AC, 50 Hz/60 Hz Power consumption SA-CT380: On: 37 W Standby: 0.3 W or less (at the Power saving mode, see page 19) Standby: 0.5 W or less (When [S. THRU] is [ON]: 6 W or less) SA-CT780: On: 40 W Standby: 0.3 W or less (at the Power saving mode, see page 19) Standby: 0.5 W or less (When [S. THRU] is [ON]: 6 W or less) Dimensions (approx.
On BLUETOOTH communication If you have any questions or problems concerning your system, please consult your nearest Sony dealer. 37GB Additional Information • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE. This EULA is a legal agreement between you and Sony Corporation (“SONY”).
available, or will operate without interruption or modification. USE OF SOFTWARE WITH COPYRIGHTED MATERIALS CONTENT SERVICE PLEASE ALSO NOTE THAT THE SOFTWARE MAY BE DESIGNED TO BE USED WITH CONTENT AVAILABLE THROUGH ONE OR MORE CONTENT SERVICES (“CONTENT SERVICE”). USE OF THE SERVICE AND THAT CONTENT IS SUBJECT TO THE TERMS OF SERVICE OF THAT CONTENT SERVICE. IF YOU DECLINE TO ACCEPT THOSE TERMS, YOUR USE OF THE SOFTWARE WILL BE LIMITED.
IS,” without warranty, duty or condition of any kind. SONY AND EACH OF THE THIRD-PARTY SUPPLIERS (for purposes of this Section, SONY and each of the THIRD-PARTY SUPPLIERS shall be collectively referred to as “SONY”) EXPRESSLY DISCLAIM ALL WARRANTIES, DUTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE.
shall constitute part of, the SOFTWARE for purposes of this EULA. By acceptance of this EULA, you consent to such update/ modification. ENTIRE AGREEMENT, WAIVER, SEVERABILITY This EULA and SONY’s privacy policy, each as amended and modified from time to time, together constitute the entire agreement between you and SONY with respect to the SOFTWARE. The failure of SONY to exercise or enforce any right or provision of this EULA shall not constitute a waiver of such right or provision.
GB
Additional Information 43GB
©2015 Sony Corporation Printed in Malaysia 4-565-123-73(1)
