Sound Bar Startup Guide HT-CT370
Table of contents Setup 1 2 3 4 5 What’s in the box 4 Installation 5 Connection 6 Turning on the system 8 Listening to the sound 9 Basic Operations Enjoying the sound effects 10 Listening to the sound from BLUETOOTH devices 12 Refer to the supplied Operating Instructions for more information on other features.
Setup 1 What’s in the box Setting up the remote control Pull up the battery cover and insert in the orientation shown in the illustration two AA batteries.
Setup 2 Installation To install the Bar Speaker on a wall Refer to the supplied Operating Instructions. If you prefer… To install the subwoofer horizontally • Place the subwoofer on the left side with the “SONY” logo facing front.
Setup / Setup / Setup 3 Connection Connecting with TV Or If the TV to be connected is not equipped with an optical audio output terminal, connect an HDMI cable (not supplied, High Speed type) to the HDMI input terminal labeled “ARC.” If the HDMI input terminal labeled “ARC” is connected with another device, disconnect that device and connect this Bar Speaker.
When connecting with TV and other devices TV Blu-ray Disc™ player, etc. This is a connection for enjoying surround sound more effectively. HDMI cable (not supplied, High Speed type) If the HDMI input terminal on the TV is not labeled “ARC,” perform connections both and . HDMI cable (not supplied, High Speed type) If it is connected to the TV, disconnect it and connect it to the Bar Speaker.
Setup 4 Turning on the system On/standby lamp Display 1 Connect the AC power cords (mains leads). 2 Press the (on/standby) button. The display lights. 3 Confirm that the on/standby lamp of the subwoofer is lit in green. If not, the wireless transmission is not activated. Refer to “No sound is heard from the subwoofer.” of “Troubleshooting” in the supplied Operating Instructions. 4 Turn on the connected device.
Setup / Setup / Setup 5 Listening to the sound / Écoute du son / Escuchar el sonido INPUT VOL INPUT VOL Input device selected Listening to the audio of the TV 1 Press the INPUT button repeatedly to select “TV” input. 2 Press the VOL button to adjust the volume. To listen to audio from an input device other than the TV Press the INPUT button repeatedly until the desired input device is indicated on the display.
Basic Operations Enjoying the sound effects To set a sound effect, press one of the sound effect buttons on the remote control to select the desired mode while checking the display. SOUND FIELD NIGHT VOICE 10 SOUND FIELD: Effects to suit to the input sound. CLEARAUDIO+ The suitable sound setting is automatically selected for the sound source. STANDARD Corresponds to every source. MOVIE Dialogue is clear, and sound is powerful and realistic.
TYPE1 Standard VOICE: Helps make dialogues clearer. TYPE2 Dialogue range is stressed. TYPE3 Dialogue range is stressed, and the parts of range difficult to be discerned by the elderly are boosted. NIGHT: Sound is output at low volume with minimum loss of fidelity and clarity of dialogue. ON Activates the Night mode function. OFF Inactivates the Night mode function.
Basic Operations Listening to the sound from BLUETOOTH devices When registering BLUETOOTH devices INPUT PAIRING Lamp (blue) To pair the system with the device (Pairing) 1 Press the PAIRING button. The lamp flashes quickly during BLUETOOTH pairing. 2 Set your BLUETOOTH device to pairing mode and select “SONY:HT-CT370.” If a Passkey is requested, enter “0000.” 3 Make sure that the lamp lights up. (Connection has been established.
When using one-touch connection (NFC) Lamp (blue) 1 Download, install, and start the “NFC Easy Connect” app on your smartphone. 2 Touch the N mark of the Bar Speaker with the smartphone. 3 Make sure that the lamp (blue) lights up. (Connection has been established.) • Compatible devices Smartphones, tablets, and music players with the NFC function built-in (OS: Android™ 2.3.3 or later, excluding Android 3.
© 2014 Sony Corporation Printed in China 4-529-841-21(1)
