Primary User Manual

26
US
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; rated 19
watts per channel minimum RMS power, with no more than 10 % total
harmonic distortion from 220 milliwatts to rated output.
SA-WBE1 (subwoofer)
Max. output
Subwoofer: 30 W (6 ohms)
Front: 15 W + 15 W (6 ohms)
Center*: 15 W
Rear*: 15 W + 15 W
* Depending on the sound field settings and the source, there may be no sound output.
Speaker system Bass reflex type
Speaker unit 130 mm (5
1
/8 inches) dia. cone type/
Dimensions (approx.) 215 × 271 × 302 mm (8
1
/2 × 10
3
/4 × 12 inches)
(w/h/d, not including the projecting parts)
Mass (approx.)
North American model: 6.3 kg (13 lb 15 oz)
Other model: 6.4 kg (14 lb 2 oz)
SS-BE1 (satellite speakers)
Speaker system Closed box type
Speaker unit 50 mm (2 inches) dia. cone type
Rated impedance 6 ohms
Dimensions (approx.) 61 × 82 × 65.5 mm (2
1
/2 × 3
1
/4 × 2
5
/8 inches) (w/h/d)
Mass (approx.) 175 g (7 oz)
General
Power requirements
North American model: 120 V AC, 60 Hz
European model: 230 V AC, 50/60 Hz
Other model: 220-240 V AC, 50/60 Hz
Power consumption
U.S. model: 60 W
1.0 W (at the Power Saving Mode)
Canadian model: 75 W
1.0 W (at the Power Saving Mode)
Other model: 45 W
0.3 W (at the Power Saving Mode)
Operating temperature 5˚C to 35˚C (41˚F to 95˚F)
Operating humidity 5 % to 90 %
Supplied accessories See page 5.
Design and specifications are subject to change without notice.