Operating Instructions (HT6900DP)

ManualsBrandsSony ManualsHome Theater SystemHT-6900DP

Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]

[2-549-736-12(1)]

lename[E:\SEM_Janet\Revision_HT-

950DP\J9050000_25497361215950DPUS\2549736121\US01COV_HT-5950DP-CA.fm]

masterpage:Right

2-549-736-12(1)

DVD Home

Theatre System

Operating Instructions

Owner’s Record

The model and serial numbers are located on the rear of the unit. Record the serial

number in the space provided below. Refer to them whenever you call upon your

Sony dealer regarding this product.

Model No.

Serial No.

HT-9950M

HT-9900M

HT-6900DP

HT-5950DP

US01COV_HT-5950DP-CA.book Page 1 Monday, April 11, 2005 11:37 AM

Summary of content (60 pages)

PAGE 1
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US01COV_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 1 Monday, April 11, 2005 11:37 AM 2-549-736-12(1) DVD Home Theatre System Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. Model No.
PAGE 2
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US02REG_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 2 Monday, April 11, 2005 11:37 AM WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.
PAGE 3
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US02REG_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 3 Monday, April 11, 2005 11:37 AM The HT-5950DP consists of: About This Manual • The instructions in this manual are for model HT-9950M, HT-9900M, HT-6900DP and HT-5950DP. Check your receiver’s model number by looking at the lower right corner of the front panel. In this manual, HT-9900M is used for illustration purposes unless stated otherwise.
PAGE 4
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US01COV_HT-5950DP-CATOC.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 4 Monday, April 11, 2005 11:37 AM Table of Contents Getting Started 1: Check how to hookup your components....................................... 5 1a: Connecting components with digital audio output jacks ........... 7 1b: Connecting components with multi channel output jacks........ 10 1c: Connecting components with only analog audio jacks ............
PAGE 5
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 5 Monday, April 11, 2005 11:37 AM Getting Started Steps 1a through 1c beginning on page 7 describe how to hook up your components to this receiver. Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component. After hooking up all your components, proceed to “2: Connecting the antennas” (page 14).
PAGE 6
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 6 Monday, April 11, 2005 11:37 AM Required cords The hookup diagrams on the subsequent pages assume the use of the following optional connection cords (A to G) (not supplied unless indicated).
PAGE 7
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 7 Monday, April 11, 2005 11:37 AM . 1a: Connecting components with digital audio output jacks Getting Started Hooking up a DVD player, TV monitor or satellite tuner For details on the required cords (A–G), see page 6. 1 Connect the audio jacks.
PAGE 8
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 8 Monday, April 11, 2005 11:37 AM 2 Connect the video jacks. The following illustration shows how to connect a TV or satellite tuner and a DVD player with COMPONENT VIDEO (Y, PB/CB/B-Y, PR/CR/R-Y) output jacks. Connecting a TV with component video input jacks allows you to enjoy higher quality video.
PAGE 9
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 9 Monday, April 11, 2005 11:37 AM Hooking up a Super Audio CD/CD player COMPONENT VIDEO DIGITAL OPTICAL ASSIGNABLE ANTENNA VIDEO 2 IN Y PB/CB /B–Y MONITOR AM Getting Started For details on the required cords (A–G), see page 6.
PAGE 10
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 10 Monday, April 11, 2005 11:37 AM 1b: Connecting components with multi channel output jacks 1 Connect the audio jacks. (HT-9950M, HT-9900M and HT-6900DP only) If your DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect it to this receiver’s MULTI CH IN jacks to enjoy the multi channel sound.
PAGE 11
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 11 Monday, April 11, 2005 11:37 AM 2 Connect the video jacks. DVD player TV monitor OUTPUT OUTPUT COMPONENT PR/CR/R–Y PB/CB/B–Y VIDEO C INPUT INPUT COMPONENT PR/CR/R–Y PB/CB/B–Y VIDEO Y G C Getting Started The following illustration shows how to connect a DVD player with COMPONENT VIDEO (Y, PB/ CB/B-Y, PR/CR/R-Y) output jacks.
PAGE 12
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 12 Monday, April 11, 2005 11:37 AM 1c: Connecting components with only analog audio jacks Hooking up audio components For details on the required cords (A–G), see page 6.
PAGE 13
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 13 Monday, April 11, 2005 11:37 AM Hooking up video components Satellite tuner OUTPUT VIDEO OUT TV monitor Getting Started If you connect your TV to the MONITOR VIDEO OUT jack, you can watch the video from the selected input (page 23). For details on the required cords (A–G), see page 6.
PAGE 14
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 14 Monday, April 11, 2005 11:37 AM 2: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna.
PAGE 15
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 15 Monday, April 11, 2005 11:37 AM 3: Connecting speakers Getting Started Connect your speakers to the receiver. This receiver allows you to use a 6.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a sub woofer (5.1 channel).
PAGE 16
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.
PAGE 17
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 17 Monday, April 11, 2005 11:37 AM Installing the speakers on the wall 3 Hang the speakers on the screws. Metal hook on the back of the speaker 4.6 mm (3/16 inch) 1 10 mm (13/32 inch) Prepare screws (not supplied) that are suitable for the metal hook on the back of each speaker. See the illustrations below.
PAGE 18
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 18 Monday, April 11, 2005 11:37 AM Performing initial setup operations 4: Connecting the AC power cord Connect the AC power cord to a wall outlet. R R L L FRONT B b To a wall outlet Before using the receiver for the first time, initialize the receiver by performing the following procedure.
PAGE 19
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 19 Monday, April 11, 2005 11:37 AM x 5: Setting up the speakers 1 2 3 Press ?/1 to turn on the receiver. Press MAIN MENU repeatedly to select “ SET UP ”. x Press or repeatedly to select the parameter you want to adjust. Initial setting: 10 ft. Lets you set the distance from your listening position to the surround speakers.
PAGE 20
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 20 Monday, April 11, 2005 11:37 AM x SW XXXXXXX (Sub woofer phase polarity) (HT-9950M, HT-9900M and HT-6900DP only) Lets you set the sub woofer phase polarity. • NORMAL Normally, select “NORMAL”.
PAGE 21
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 21 Monday, April 11, 2005 11:37 AM Adjusting the level Slight adjustments to the system can enhance your sound enjoyment.
PAGE 22
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US03CON_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 22 Monday, April 11, 2005 11:37 AM 7: Adjusting the speaker levels and balance — TEST TONE Adjust the speaker levels and balance while listening to the test tone from your listening position. Use the remote for the operation. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 1 2 Press ?/1 to turn on the receiver. Press TEST TONE.
PAGE 23
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 23 Monday, April 11, 2005 11:37 AM To use the headphones Amplifier Operation Selecting the component Press input buttons to select the input.
PAGE 24
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 24 Monday, April 11, 2005 11:37 AM Listening to multi channel sound — MULTI CH IN (HT-9950M, HT-9900M and HT-6900DP only) Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (see page 14).
PAGE 25
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 25 Monday, April 11, 2005 11:37 AM Direct tuning Presetting radio stations You can enter the frequency of the station you want directly. Use the remote for the operation. Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. Tip You can also use FM or AM on the receiver. 2 3 Presetting radio stations 1 Press D.
PAGE 26
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 26 Monday, April 11, 2005 11:37 AM Tuning to preset stations 1 2 Press FM or AM to select the FM or AM band. Changing the display The last received station is tuned in. Changing the information in the display Press PRESET TUNING + or PRESET TUNING – repeatedly to select the preset station you want. You can check the sound field etc.
PAGE 27
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 27 Monday, April 11, 2005 11:37 AM About the indications in the display 2 3* SW LFE SP A ; DIGITAL EX ; PRO LOGIC IIx DTS-ES 96/24 SP B SLEEP OPT COAX L C R SL S SR SB 4 qs 5 6 7 NEO:6 D.RANGE STEREO MONO 9 8 qa q; MEMORY qd A SW: Lights up when the audio signal is output from the SUB WOOFER jack.
PAGE 28
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 28 Monday, April 11, 2005 11:37 AM M Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound.
PAGE 29
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US05SND_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 29 Monday, April 11, 2005 11:37 AM Enjoying Surround Sound Using only the front speakers and sub woofer — 2CH STEREO — AUTO FORMAT DIRECT The Auto Format Direct (A.F.D.) mode allows you to select the decoding mode you want for your audio sound. A.F.D. mode (Display) Decoding mode A.F.D. AUTO (A.F.D.
PAGE 30
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US05SND_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 30 Monday, April 11, 2005 11:37 AM Decoding the input audio signal automatically In this mode, the receiver automatically detects the type of audio signal being input (Dolby Digital, DTS, standard 2 channel stereo, etc.) and performs the proper decoding if necessary.
PAGE 31
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US05SND_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 31 Monday, April 11, 2005 11:37 AM Selecting a sound field You can take advantage of surround sound simply by selecting one of the receiver’s preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. Press MOVIE repeatedly to select the sound field you want.
PAGE 32
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US05SND_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 32 Monday, April 11, 2005 11:37 AM Tips Selecting a sound field for music Press MUSIC repeatedly to select the sound field you want. The selected sound field appears in the display.
PAGE 33
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US05SND_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 33 Monday, April 11, 2005 11:37 AM Selecting the surround back decoding mode — SURR BACK DECODING Enjoying Surround Sound This function lets you select the decoding mode for the surround back signals of the multi channel input stream. By decoding the surround back signal of DVD software (etc.) recorded in Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete 6.
PAGE 34
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US05SND_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 34 Monday, April 11, 2005 11:37 AM How to select the surround back decoding mode You can select the surround back decoding mode you want according to the input stream. When you select “SB AUTO” When the input stream contains the 6.1 channel decode flaga), the appropriate decoder is applied to decode the surround back signal.
PAGE 35
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US06ADV_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 35 Monday, April 11, 2005 11:37 AM Advanced Adjustments and Settings Assigning the component video input — COMPONENT VIDEO INPUT ASSIGN 1 2 3 4 5 Press MAIN MENU repeatedly to select “ CUSTOM ”. Press or repeatedly to select “COMP. V. A.”. You can switch the audio input mode for components which have digital audio input jacks.
PAGE 36
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US06ADV_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 36 Monday, April 11, 2005 11:37 AM Customizing sound fields By adjusting the LEVEL menu, you can customize the sound fields to suit your particular listening situation. Note on the displayed items The setup items you can adjust in each menu vary depending on the sound field. Certain setup parameters may be dimmed in the display.
PAGE 37
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US06ADV_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 37 Monday, April 11, 2005 11:37 AM Resetting sound fields to the initial settings Use the buttons on the receiver for the operation. 1 2 Press ?/1 to turn off the power. While holding down 2CH, press ?/1. “SF. CLR.” appears in the display and all sound fields are reset to the initial setting.
PAGE 38
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US06ADV_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 38 Monday, April 11, 2005 11:37 AM x SB XXXX (Surround back decoding mode) Advanced settings Using the CUSTOMIZE menu to adjust the receiver You can adjust various receiver settings using the CUSTOMIZE menu. 1 2 Note Press MAIN MENU repeatedly to select “ CUSTOM ”. Press or repeatedly to select the parameter you want to adjust.
PAGE 39
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US06ADV_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 39 Monday, April 11, 2005 11:37 AM x DUAL XXX (Digital broadcast language selection) x COMP. V. A. (Component video input assignment) Lets you assign the component video input to another visual input. For details, see “Assigning the component video input” on page 35.
PAGE 40
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US070TH_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 40 Monday, April 11, 2005 11:37 AM Using the Sleep Timer Other Operations Naming preset stations and inputs You can enter a name of up to 8 characters for preset stations and inputs selected with input buttons, and display it in the receiver’s display. Use the buttons on the receiver for the operation.
PAGE 41
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US070TH_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 41 Monday, April 11, 2005 11:37 AM Selecting the speaker system Recording You can select the front speaker system you want to use by pressing the following button. The selected speaker system appears in the display.
PAGE 42
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US070TH_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 42 Monday, April 11, 2005 11:37 AM Recording on a video tape You can record from a VCR, a TV or a DVD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR or DVD player if you need help. 1 2 Select the program source to be recorded.
PAGE 43
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 43 Monday, April 11, 2005 11:37 AM Operations Using the Remote RM-AAP001 You can use the remote RM-AAP001 to operate the components in your system.
PAGE 44
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 44 Monday, April 11, 2005 11:37 AM The tables below show the settings of each button. Remote Button Operations Function Remote Button Operations Function CLEAR 9 A.F.D. 7 Receiver Selects the decoding mode for audio sound. ALT wd Remote When ALT button lights up, it changes the remote key function to activate those buttons with orange printing.
PAGE 45
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 45 Monday, April 11, 2005 11:37 AM Operations Function Remote Button Operations Function MASTER VOL +/– qk Receiver Adjusts the master volume of the receiver. SLEEP ef Receiver MD/TAPE 5 Receiver To listen to Minidisc or audio tape. Activates the sleep function and the duration which the receiver turns off automatically.
PAGE 46
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 46 Monday, April 11, 2005 11:37 AM Remote Button Operations Function Remote Button Operations 1-9 7 and 0/10 8 Receiver Use with SHIFT to preset radio station or tuning to preset stations and with D.TUNING for direct tuning. m/M 9 CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Selects track numbers. 0/10 selects track 10.
PAGE 47
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 47 Monday, April 11, 2005 11:37 AM Remote Button Operations Function O qa VCD player/ Returns to the LD player/ previous menu or DVD player/ exits the menu. Blu-ray disc recorder/ Hard disc recorder/PSX/ Satellite tuner Receiver Selects a menu item. B/b qa Receiver Adjusts or changes the setting. V/v/B/b qa Selects a menu item.
PAGE 48
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 48 Monday, April 11, 2005 11:37 AM Programming the remote You can program the remote to control nonSony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control.
PAGE 49
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 49 Monday, April 11, 2005 11:37 AM The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control.
PAGE 50
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.
PAGE 51
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US08REM_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.
PAGE 52
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 52 Monday, April 11, 2005 11:37 AM If you encounter color irregularity on a nearby TV screen Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further.
PAGE 53
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 53 Monday, April 11, 2005 11:37 AM Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for that component.
PAGE 54
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 54 Monday, April 11, 2005 11:37 AM Dolby Digital or DTS multi channel sound is not reproduced. • Check that the playing DVD, etc. is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output) of the connected component.
PAGE 55
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.book Page 55 Monday, April 11, 2005 11:37 AM Error messages If there is a malfunction, the display shows a message. You can check the condition of the receiver by the message. Refer to the following table to solve the problem. DEC. EROR Appears when the signal which the receiver cannot decode (ex. DTS-CD) is input when “DEC. XXXX” in the CUSTOMIZE menu is set to “DEC.
PAGE 56
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 56 Monday, April 11, 2005 11:37 AM 1) Measured under the following conditions: AM tuner section Area code Power requirements U, CA 120 V AC, 60 Hz Tuning range Model of area code U, CA With 10-kHz tuning scale: With 9-kHz tuning scale: Antenna Intermediate frequency 2) Depending on the sound field settings and the source, there may be no sound output.
PAGE 57
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm] masterpage:Right US01COV_HT-5950DP-CA.
PAGE 58
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm] masterpage:Left US01COV_HT-5950DP-CA.book Page 58 Monday, April 11, 2005 11:37 AM Sub woofer HT-9950M, HT-9900M and HT-6900DP only (SA-WMSP69) HT-5950DP only (SA-WMSP87) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, from 28 – 200 Hz; rated 120 watts (SA-WMSP69)/120 watts (SA-WMSP87), minimum RMS power, with no more than 0.
PAGE 59
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US09ADD_HT-5950DP-CA.fm] masterpage:Right-3 (3 column) US01COV_HT-5950DP-CA.book Page 59 Monday, April 11, 2005 11:37 AM List of button locations and reference pages How to use this page Use this page to find the location of buttons that are mentioned in the text.
PAGE 60
lename[E:\SEM_Janet\Revision_HT950DP\J9050000_25497361215950DPUS\2549736121\US01COV_HT-5950DP-CAIX.fm] masterpage:Left US01COV_HT-5950DP-CA.