Operating Instructions

46
US
HT-1750DP 4-244-184-31(1) US
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Speaker connecting cord, long (2)
Speaker connecting cord, short (3)
Monaural connecting cord (1 phono to 1 phono) (1)
Coaxial digital cord (1)
Foot pads (speakers) (20)
Foot pads (subwoofer) (4)
Remote commander (1)
R6 (size -AA) batteries (2)
Speakers
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)
For details on the area code of the component you
are using, see page 4.
Design and specifications are subject to change
without notice.
SA-WMSP75 for sub woofer
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, from 28 – 200 Hz;
rated 75 watts (SA-WMSP75), minimum RMS
power, with no more than 0.8% total harmonic
distortion from 250 milliwatts to rated output.
Speaker system Active subwoofer,
magnetically shielded
Speaker unit Woofer: 20 cm cone type
Enclosure type Acoustically loaded bass
reflex
Continuous RMS power output
(6 ohms, 20 – 250 Hz)
75 W
Reproduction frequency range
28 Hz – 200 Hz
High frequency cut-off frequency
150 Hz
Input LINE IN (input pin jacks)
Power requirements 120 V AC, 60 Hz
Power consumption 75 W
Dimensions (w/h/d) Approx.10 3/4 × 12 7/8 ×
15 3/4 inches including
front panel
Mass Approx. 19 lb 14 oz
Specifications (continued)