OPERATING MANUAL Bluetooth Enabled Car Kit Version 3.
OVERVIEW This unit uses Bluetooth technology that allows wireless communication among devices such as cellular phones. This is designed to be a totally wireless hands-free Car Kit. This will enable the user to communicate freely while driving, without holding the phone. This unit will work on all Bluetooth cellular phones provided that they respect the Bluetooth protocol.
• Wireless Microphone Illustration Figure 3 Figure 2 REMARKS: § § § § If microphone is not “ON” during a communication, the sound on the speaker will be attenuated. In standby mode, the microphone will still have a small consumption (less than 1.8 microwatts). On some versions, the indicator light will only turn ON for 2 seconds after the microphone is switched ON. If the light is red, this indicates low battery.
E. ANSWERING/RECEIVING A CALL When the phone is receiving a call, the phone ring tone will be heard on the Car Kit. Just press the multi-function button (1) on the main unit to answer the call. Pressing the button again will hang-up and terminate the call. (Please refer to Car Kit Operations for Popular Cell Phones section on page 4 for additional information). F. MAKING A CALL (Refer to Car Kit Operations For Popular Cell Phones section on page 4).
CAR KIT OPERATIONS FOR POPULAR CELL PHONES Note 1: If your phone is not included in the following list of this manual, kindly refer to the manual of your phone. Note 2: Softwares and menus could be modified by the cell phone’s manufacturers without prior notice. If the manual does not match with your cell phone operations, kindly refer to the manual of your cell phone. Note 3: Multi-pairing is now possible. Ericsson T39m ………………………………….……………………… 8 Sony Ericsson T68/T68i ……………………………….
Suggested Pairing Modes Pairing Mode Handsfree Headset Cell Phone Models Ericsson T39m Sony Ericsson T68 Sony Ericsson T68i (R6 and below) Sony Ericsson T68i (R7) Sony Ericsson P800 / P900 Sony Ericsson T610 Sony Ericsson T628 Sony Ericsson Z600 Sony Ericsson K700i Motorola E398 Motorola V80 Motorola V600 Nokia 6310/6310i Nokia 8910 Nokia 8910i Nokia 3650 Nokia 6230 Nokia 6650 Nokia 6600 Panasonic X70 Qtek2020 Sharp GX32 Siemens S55 The Car Kit turns on automatically when the engine is turned on.
USING WITH SONY ERICSSON T39m a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu Key. Scroll to Extras and press YES. Select Operation mode, YES. On, YES. 2. Continue pressing NO to exit. QUICK ACCESS: Press Menu followed by the sequence of numbers below. Extras Blue tooth Operation mode T39m 5 6 4 b. PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone at about 20 cm from the Car Kit.
Voice dialing Refer to step f and g for the procedure when activating and recording for voice dialing. 1. Press the multi-function button once to activate the voice dialing. 2. A beep will then be heard on the Car Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. 4.
QUICK ACCESS: Press Menu followed by the sequence of numbers below. Connect Blue tooth Options T68 8 3 T68i 8 4 (or 3 for T68i R7) 4 b. Operation mode 2 1 PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone at about 20 cm from the Car Kit. 2. From the ON state, press the multi-function button for 10 seconds or until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue.
2. 3. 4. A beep will then be heard on the Car Kit prompting the user to say the name of the person to call. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. Press the button again to terminate the call. Redialing For T68i R6 and R7, press twice quickly the multi-function button. Call is automatically transferred to the Car Kit. e.
3. 4. Follow the instructions in the display. An icon will appear next to a contact name which has a voice command. Continue pressing NO to exit. QUICK ACCESS: Press Menu followed by the sequence of numbers below. Settings Voice control Voice commands T68 5 8 2 Settings Voice control Voice dialing T68i 5 6 1 Contacts 4 Edit names 2 Note: Record your voice command in a quiet place so that only your voice will be recorded on the phone. USING WITH SONY ERICSSON P800 / P900 a.
2. 3. d. If you wish to answer the call on the cellular phone, just press ok key and audio will be heard on the phone. Pressing the multi-function button will transfer the audio to the Car Kit. To terminate the call, press the multi-function button again. MAKING A CALL with the Car Kit on Normal dialing 1. Enter the contact number and press OK. Sound is automatically transferred to the Car Kit. 2. Press the multi-function button to hang-up and terminate the call.
USING WITH SONY ERICSSON T610 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT. Turn On, SELECT. 2. Continue pressing to exit. b. PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone at about 20 cm from the Car Kit. 2.
e. AUDIO TRANSFER Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls. f. REJECTING A CALL Press the multi-function button twice to reject the incoming call. g. ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on and record number types: 1. Go to Menu by pressing the joystick.
5. 6. Enter “0000” as the passkey then press OK. If the pairing is successful, the alternating red/blue lights will stop. Continue pressing to exit from Menu. The unit is now ready to link calls from the phone directly to the Car Kit. An icon, will appear during the standby mode indicating that the Car Kit is linked with the phone. d. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Car Kit. 1.
USING WITH SONY ERICSSON Z600 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu Key . Scroll to Connectivity, SELECT. Bluetooth, SELECT. Choose Turn ON, SELECT. 2. Continue pressing to exit. QUICK ACCESS: a. Press More key. b. Scroll to Turn On Blue tooth, SELECT. c. Continue pressing to exit. b. SETTING TO LOW POWER MODE 1. Press Menu Key . Scroll to Connectivity, SELECT.
2. 3. 4. A beep will then be heard on the Car Kit prompting the user to say the name of the person to call. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. Press the button again to terminate the call. f. AUDIO TRANSFER Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls. g.
6. 7. 8. Enter “0000” as the passcode then press Ok. If pairing is successful, the alternating red/blue lights (Bluetooth Indicator) will stop and will change to plain blinking blue. Your device name is now added under My devices tab. Highlight the newly paired device and then press Connect to completely establish connection between your mobile phone and your Car Kit. When a statement appeared indicating that your device is connected, continue pressing to exit.
h. RECORDING FOR VOICE DIALING Note: Voice dialing entries must be stored in the phone’s memory (not on the SIM card!). 1. 2. 3. 4. 5. 6. Press to access Main Menu. Scroll to Settings and press Select. Choose Voice control, Select. Voice dialing, Select. Edit names, Select. New voice, Add. (Contacts list will appear). Choose among the contacts whichever you want to have a voice name/voice tag. When it’s highlighted, press Select. Follow the instructions that will be displayed on screen.
e. MAKING A CALL with the Car Kit on Normal dialing 1. Enter the contact number and press Call key. Audio will be heard on the Car Kit. 2. To terminate or hang-up the call, shortly press the multi-function button. Voice dialing Make a phone call by saying a voice name / voice tag. But first refer to step h and i for the procedure when recording for voice dialing. 1. Press the multi-function button once to activate voice dialing. 2.
USING WITH MOTOROLA V80 a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. 2. 3. b. Press the joystick to access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth Link, SELECT. Scroll to Setup, SELECT. Scroll to Power, CHANGE. Choose ON, SELECT. Continue pressing Back to exit. PAIRING TO THE CELLULAR PHONE 1.
e. AUDIO TRANSFER Audio transfer can be done during an ongoing call. Car kit initiates transfer from kit to phone: Press twice quickly the multi-function button. Car kit initiates transfer from phone to kit: Shortly press the multi-function button once. Note: Using your phone for audio transfer, press button of the 5-way navigation key. On the Call Menu, choose “Use handset” or “Use Bluetooth” to transfer audio to phone or to the kit. f.
4. 5. 6. Choose Handsfree, SELECT. [Look for devices], SELECT. The phone will then scan the device to be added. On the scan results, choose the device you want to pair with your cell phone, SELECT. A question “Bond with … (device name)?” appears. Press YES. Enter Bluetooth passkey “0000” then press ok. If pairing is successful, a remark “Connected to… (device name)” appears. The phone exits automatically. The unit is now ready to link calls from the phone directly to the Car Kit.
3. 4. 5. 6. On the Entry Details, choose “…MORE…” and press SELECT. On the Add New, choose Phone Number, SELECT. “No.:_______” is highlighted, Press CHANGE. Enter the corresponding contact number and then press Ok. (Do not press DONE yet). Using the 5-way Navigation key scroll down to “Voice Name” then press RECORD. Follow instructions on the screen. Note: If recording is successful, an icon will appear next to Voice Name. Press DONE. Notes: 1. The recorded voice will be played back to you. 2.
Note: Once paired, the Car Kit and phone have simultaneous connection with each other. (Keypad tones can be heard on the Car Kit when keypad is pressed). c. AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit. 1. Press the Menu button. Scroll to Bluetooth, SELECT. Scroll to View paired devices, SELECT. 2. Select the Car Kit and press OPTIONS.
h. RECORDING FOR VOICE DIALING Use your phone when recording voice dialing. 1. Press the Names button. Search, SELECT. Press List button. 2. Find a contact name. Press Details button. 3. Press Options button. Add voice tag, SELECT. Instructions appear. Your voice is automatically saved on the phone after being played back to you. 4. In case you wish to change your recorded voice, press Options button. Voice tags, SELECT. Change, SELECT. Instructions appear. 5. Continue pressing Back button to exit.
c. AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit. 1. Press Menu. Scroll to Bluetooth, SELECT. Scroll to View paired devices, SELECT. 2. Select the Car Kit and press OPTIONS. Scroll to Request conn. authorisation, SELECT. No, SELECT. 3. Continue pressing Back to exit from Menu. QUICK ACCESS: Press Menu followed by the sequence of numbers below.
2. Find a contact name to which you want to add a voice tag. Press Details button. The phone number will be displayed. 3. Press Options button. Add voice tag, SELECT. Press Start, and say the name clearly. Voice tag saved is displayed indicating that the voice tag has been saved. 4. In case you wish to change your recorded voice, press Names, Voice tags, SELECT. Scroll to the name that you want to change the voice tag then press Options. Change, SELECT. Follow the instructions. 5.
2. 3. Select the Car Kit and press OPTIONS. Scroll to Request conn. authorisation, SELECT. No, SELECT. Continue pressing Back to exit from Menu. QUICK ACCESS: Press Menu followed by the sequence of numbers below. Connectivity Bluetooth View paired devices 8910i 10 1 4 Select Options d. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Car Kit as well as on the phone. 1. Press the multi-function button down once to answer the call. 2.
5. Continue pressing Back to exit. Note: Noisy environment could affect voice recognition. Record voice in a quiet environment. USING WITH NOKIA 3650 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu button. Scroll to Connect., OPTIONS. A list of options will be displayed. Choose OPEN then press SELECT. Choose Bluetooth, OPTIONS. Choose OPEN, and press SELECT. 2.
d. ANSWERING/RECEIVING A CALL When the phone is receiving a call, simultaneous ring tone will be heard on the Car Kit as well as on the phone. 1. Press the multi-function button once to answer the call. 2. End the call by pressing the button again. Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit. e. MAKING A CALL with the Car Kit on Normal dialing 1. Enter the contact number and send.
USING WITH NOKIA 6230 a. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu and select Settings, Connectivity and Bluetooth. 2. Select Blue tooth on and On. 3. Continue pressing Back then finally Exit. b. PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone at about 20 cm from the Car Kit. 2. From the ON state, press the multi-function button for 10 seconds or until a distinctive 3. 4.
2. Pressing once again on the multi-function button will terminate the call. Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit. e. MAKING A CALL with the Car Kit on Normal dialing 1. Enter the contact number and press CALL key. As you dial, audio and the keypad tones can be heard on the Car Kit, not on the phone. 2. Press the multi-function button to terminate the call. Voice dialing Refer to step h for the procedure when recording for voice dialing. 1.
QUICK ACCESS: Press Menu followed by the sequence of numbers below. Connectivity Bluetooth BluetoothOff 6650 11 1 1 b. On 1 Select 1 PAIRING TO THE CELLULAR PHONE 1. Bring the cellular phone at about 20 cm from the Car Kit. 2. From the ON state, press the multi-function button for 10 seconds or until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue.
Voice dialing Refer to step h for the procedure when recording for voice dialing. 1. Press the multi-function button once to activate the voice dialing. 2. A tone will then be heard on the Car Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps above may be repeated. 4. Press the button again to terminate the call.
4. 5. Enter “0000” as the passcode then press OK. “Waiting for…” and “Pairing with…complete” will be displayed simultaneously. Continue pressing Exit key to exit the Menu. The Car Kit is paired and ready to use. An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone.
f. AUDIO TRANSFER Audio Transfer can be done by pressing the multi-function button or accessing the cell phone’s menu during ongoing calls. g. REJECTING A CALL Press the multi-function button twice to reject the incoming call. h. RECORDING FOR VOICE DIALING Use your phone when recording voice dialing. 1. Press the Menu button. Scroll to Contacts and press . 2. Find a contact name. Press button. (The contact number is the one being displayed.) 3. Press Options button. Scroll to Add Voice tag, SELECT.
6. 7. Enter “0000” as the passkey then press Ok. If the pairing is successful, the alternating red/blue lights will stop. Continue pressing to exit. The unit is now ready to link calls from the phone directly to the Car Kit. An icon appears during the standby mode indicating that the Car Kit is linked with the phone. If pairing is unsuccessful, the steps above may be repeated. c.
3. 4. 5. 6. 7. Press Menu. Choose Add, Select. On the contact names listed, choose the one you want to make a voice dial. After choosing a contact, press again center button of key. Choose Recall, Select. A statement “Please Record Your Voice!” appears. Press Ok. Follow the instructions on screen. Voice is then saved on the phone. Under Voice Dial list, the name which already has a voice command appears. Continue pressing to exit. Note: Noisy environment may affect voice recognition.
d. MAKING A CALL with the Car Kit on Normal dialing With your Pocket PC Phone, you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Press button to bring up the dialer screen. 2. Tap the number on the keypad, and then tap Talk key. Note: Ongoing call will be heard on the phone and not immediately on the Car Kit. You have to press once on the Car Kit’s multi-function button to transfer the sound to the Car Kit. 3.
c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, two dissimilar tones will be heard on the Car Kit. 1. When answering is done on the Car Kit, (that is, pressing the multi-function button once), the ongoing call can be heard from it. 2. When answering is done on the phone, ongoing call can still be heard on the Car Kit. 3. To terminate the call, press the multi-function button once. d. MAKING A CALL with the Car Kit on Normal dialing 1.
4. Pls, enter BT pin for…, OK. Enter “0000” as the BT pin then press OK. Handsfree trusted will be displayed afterwards indicating that the pairing is completed. 5. Continue pressing the On/Off/End Key to exit from Menu. The Car Kit is paired and ready to use. An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard from the phone. 1.
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Dieses Gerät befindet sich in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG.
