User Manual

Note

When beep is set to OFF, the connection beep does not sound.

[81] Using the camera connected to other devices via Wi-Fi Connecting to Handycam

Connecting a single camera to Handycam (Single

connection)

You can operate the camera using a Handycam that supports the multi camera control function.

REC/ENTER button.

When you connect the camera to Live-View Remote since second time

Press the MENU button, then press the UP button or DOWN button to select

(camera

settings) -

(Wi-Fi connection setting) - (multi connection) - , then press

the REC/ENTER button.

If you will continue to connect multiple cameras, repeat from step 2.

Turn on the Handycam.

For details, refer to “Connecting this product to one camera with Multi Camera Control (Single

Connection)” in the Help Guide of the Handycam.

Example: Help Guide of FDR-AX40/AX53/AX55/AXP55

http://rd1.sony.net/help/cam/1630/h_zz/

Set the connection mode of the camera.

Press the MENU button, then press the UP button or DOWN button to select

(camera

settings) -

(Wi-Fi connection setting) - , then press the REC/ENTER button.

Select the SSID that is printed on the sticker attached to the rear of the camera's

battery cover with the Handycam.

The connection beep sounds, then is displayed on the display panel.

Press the REC/ENTER button.