User Manual

Note

When beep is set to OFF, the connection beep does not sound.

If the connection does not complete, congestion of the radio wave might be the cause. Retry the connection

by changing the place.

[80] Using the camera connected to other devices via Wi-Fi Connecting to the Live-View Remote

Connecting multiple cameras to Live-View Remote

(Multi connection)

This section explains how to connect to Live-View Remote “RM-LVR3”. If you are using other Live-

View Remote, see Help Guide of the relevant remote control.

Press the MENU button, then press the UP button or DOWN button to select

(camera

settings) -

(Wi-Fi connection setting) - , then press the REC/ENTER button.

Select the SSID that is printed on the sticker attached to the rear of the camera's

battery cover with the Live-View Remote.

The connection beep sounds, then

is displayed on the display panel.

Press the UP button or DOWN button to select

, then press the REC/ENTER

button.

Turn on the Live-View Remote.

For details, refer to “Connecting the remote control to multiple cameras via Wi-Fi” in the Help

Guide of the Live-View Remote (RM-LVR3).

http://rd1.sony.net/help/cam/1650/h_zz/

Set the camera.

When you connect the camera to Live-View Remote for the first time

Press the MENU button, then press the UP button or DOWN button to select

(camera

settings) -

(Wi-Fi connection setting) - (multi connection) - , then press the

REC/ENTER button.

When the connection beep sounds and

is displayed on the display panel, register the

camera using the Live-View Remote.

appears on the display panel of the camera when connecting finishes. Press the