User Manual

Using the camera with an external power supply
The camera is compatible with the following external power supply.
External power supply of 1.5 A
Receives USB power from the connected device
Note
If you change the USB power supply setting while the micro USB cable is connected, disconnect the cable,
then reconnect.
If you turn on the camera while charging the battery pack, charging stops and power is supplied to the
camera from the device connected via USB.
You can shoot images using a USB power supply. However, the battery pack is not charged simultaneously.
When using the camera with an external power supply, check that the icon (
) indicating that USB power
is being supplied is displayed on the screen.
While USB power is being supplied, the continuous movie shooting time may be shortened due to the camera
heating up.
Even if the AC adaptor is connected to the camera, the battery will not be charged if the camera is turned on.
[54] Changing the Settings Camera settings
Beep
You can set the audible notification of operations ON/OFF.
Press the MENU button.
1
Press the UP button or DOWN button to select (camera settings) - (beep) -
setting value, then press the REC/ENTER button.
(All operation sounds are enabled)
(Operation sounds are emitted for the following operations only)
Power turned on
Recording started
Recording stopped
Shutter pressed
A disabled operation was selected or an error occurred
Connection confirmation beep
(All operation sounds are disabled)
2