User Manual

Format
Formatting is the process of deleting all images in the memory card, and restoring the memory card to
its initial state.
Note
Save important images before formatting. The protected data is also initialized.
Do not perform any of the following operations while formatting.
Press a button.
Eject the memory card.
Connect/disconnect a cable.
Insert/remove the battery pack.
[53] Changing the Settings Camera settings
USB power supply
When connecting the camera to a computer or USB device with the micro USB cable (supplied), the
camera receives power from the connected device.
The USB power supply can be available by selecting ON from the following operation.
Press the MENU button.
1
Press the UP button or DOWN button to select (camera settings) -
(format), then press the REC/ENTER button.
Formatting starts when you select
, then press the REC/ENTER button. The progress bar
appears.
Formatting cancels when you select
, then press the REC/ENTER button.
The formatting completes when a screen with check mark is displayed. Press the REC/ENTER
button to return to the previous MENU.
2
Press the MENU button.
1
Press the UP button or DOWN button to select (camera settings) - (USB
supply power) - setting value, then press the REC/ENTER button.
(Power received when connected by the micro USB cable)
(No power received when connected by the micro USB cable)
2