User Manual

To enable this function, it is necessary to turn on the above setting and the Bluetooth setting of both

the camera and the corresponding device in advance.

For setting and operating the Live-View Remote (RM-LVR3), refer to “Bluetooth remote controller

power setting” in the help guide of the Live-View Remote.

http://rd1.sony.net/help/cam/1650/h_zz/

For setting

up and operating a smartphone, see below. Also, check the latest information and function

information of the PlayMemories Mobile as well.

http://www/sony.net pmm/

Bluetooth remote controller power setting for smartphones

Perform the following operations with the camera and a smartphone that is connected via Wi-Fi.

For connecting the camera to your smartphone, see “Connecting to your smartphone”.

After pairing complete a sound is heard and power operation of the camera is enabled.

Operating the power of the camera with a smartphone

To turn the camera on/off, start PlayMemories Mobile and tap [Camera Remote Power ON/OFF].

Hint

If the camera and Live-View Remote “RM-LVR3” are connected, the power of the camera is turned on when

the power of the Live-View Remote is turned on. When the camera has a multi connection with a Live-View

Remote “RM-LVR3”, up to five cameras can be turned on simultaneously when the Live-View Remote is

turned on.

Note

This function cannot be used when the airplane mode is ON.

Even if camera is turned off, the corresponding device will remain on.

Even if the camera is turned off, battery will consume when this function is turned on. After use, remove the

battery from the camera for storage.

[52] Changing the Settings Camera settings

Press the UP button or DOWN button to select (camera settings) -

(Bluetooth remote controller power setting) - setting value, then press the

REC/ENTER button.

(Ability to turn the camera on/off with a corresponding device is enabled.)

(Ability to turn the camera on/off with a corresponding device is disabled.)

Turn on the Bluetooth setting on the smartphone.

Start PlayMemories Mobile application on the smartphone.

Use the application to turn on the remote power function of the camera.

Use the application to select the camera to be connected.

On the application screen that appears, allow pairing for the selected camera.

Check the screen to be displayed and the sound prompting the pairing setting permission of the

selected camera, then press the REC/ENTER button on the camera.