Operating Guide

117
Troubleshooting
Movies cannot be added in the
Playlist.
There is no free space in the media.
To the Playlist on the internal memory
(HDR-UX20) or the “Memory Stick PRO
Duo,” you can add a maximum of 999
movies with HD (high definition) image
quality, or 99 movies with SD (standard
definition) image quality. To the Playlist
on the disc, you can add a maximum of 999
movies.
You cannot add still images in the Playlist.
You cannot add all movies recorded on a
disc to a Playlist at once, when the movies
are recorded with both the “1920 × 1080/
60i” standard and the “1440 × 1080/60i”
standard on the disc.
A movie cannot be divided.
A movie that is too short cannot be divided.
A movie protected on another device
cannot be divided.
An image cannot be deleted.
Movies cannot be deleted depending on the
following.
Movies recorded on DVD-R/DVD+R DL
Movies with SD (standard definition)
image quality other than the most recent
movie on DVD-RW with the VIDEO
mode
Movies with SD (standard definition)
image quality other than the most recent
movie on DVD+RW
During Easy Handycam operation, movies
on the disc cannot be deleted.
An image protected on another devices
cannot be deleted.
Still images cannot be captured from
a movie.
There is no space on the media to record a
still image (p. 59).
Unable to finalize.
Battery is running out during finalizing.
Use the AC Adaptor.
The disc has already been finalized. In the
case of following discs, follow the required
procedure to record additional material
(p. 80):
DVD+RW
DVD-RW recorded with HD (high
definition) image quality
DVD-RW (VIDEO mode) recorded with
SD (standard definition) image quality
Unable to perform [UNFINALIZE].
You cannot perform [UNFINALIZE] on
the following discs:
DVD-R
DVD+R DL
DVD+RW recorded with SD (standard
definition) image quality
DVD-RW (VR mode) recorded with SD
(standard definition) image quality
You cannot edit or record additional
material on a disc using other
devices.
You may not be able to edit or record
additional material on a disc recorded on
your camcorder using other devices.
You cannot view the image or hear
the sound on the TV.
When you are using the component A/V
cable, set [COMPONENT] according to
the requirements of the connected device
(p. 95).
Only the component plugs of the
component A/V cable are connected to the
TV. Make sure the red and white plugs are
connected (p. 51, 53).
Images are not output from the HDMI
OUT jack, if copyright protection signals
are recorded in the images.
Viewing images on the TV
Continued ,