User manual

Note
You cannot use any InfoLITHIUM battery pack other than the V series to this product.
You cannot use the NP-FV30 InfoLITHIUM battery pack with this product.
In the default setting, the power turns off automatically if you leave this product without
any operation for about 2 minutes, to save battery power (Power Save).
[13] How to Use
Getting started Power source preparations
Charging the battery pack using the AC Adaptor
Charge the battery pack using the supplied AC Adaptor. Attach the battery pack in advance.
1. Close the LCD monitor.
2. Pull out the USB Cable from this product.
3. Connect this product to a wall outlet (wall socket) using the USB connection support
cable and the AC Adaptor.
The POWER/CHG (charge) lamp lights orange.
The POWER/CHG (charge) lamp turns off when the battery pack is fully charged.
Disconnect the USB connection support cable from this product.
A: USB connection support cable
B: AC Adaptor