Operating Guide

91
E:\SONY\2661355111\01US08COM.fm
HDR-HC3
2-661-355-11(1)
Using a Computer
10Touch [NO] to finish creating a
DVD.
The disc tray comes out automatically.
To create another DVD with the same
content, touch [YES].
The disc tray comes out. Place a new
writable DVD in the disc drive. Then,
repeat steps 9 and 10.
To cancel the operation
Touch [CANCEL] on the LCD screen on
your camcorder.
• You cannot cancel the operation after
[Finalizing DVD.] is displayed on the LCD
screen of your camcorder.
• Do not disconnect the i.LINK cable or set the
POWER switch to another mode on your
camcorder until the picture is completely copied
to the computer.
• When [CONVERTING] or [WRITING] is
displayed on the screen, capturing of pictures
has already finished. Even if you disconnect the
i.LINK cable or turn off the camcorder at this
stage, DVD creation will continue on your
computer.
• If any of the following occurs, copying of the
picture is canceled. A DVD containing the data
up to the point the operation was canceled is
created. Refer to the help files of “Click to
DVD” for details.
– The tape contains a 10-second or longer blank
portion.
– The tape data contains a date before the date
of later images.
– Both 16:9 (wide) and 4:3 pictures are
recorded on the same tape.
• You cannot create a DVD in the following
situations:
– While a tape is running.
– While recording images onto a “Memory
Stick Duo.”
– When “Click to DVD” is started up from the
computer.