Operating Guide
Table Of Contents
- US
- IMPORTANT SAFETY INSTRUCTIONS
- Read this first
- Operation flow
- Table of contents
- Getting started
- Recording/Playback
- Making good use of your camcorder
- Saving movies and photos with a computer
- Preparing a computer (Windows)
- Starting PMB (Picture Motion Browser)
- Selecting the method for creating a disc (computer)
- Creating a disc with one touch (One Touch Disc Burn)
- Importing movies and photos to a computer
- Creating an AVCHD disc
- Creating a standard definition image quality (STD) disc that can be played on ordinary DVD players
- Saving images with an external device
- Customizing your camcorder
- Additional information
- Quick reference
- ES
- Lea este apartado en primer lugar
- Flujo de funcionamiento
- Índice
- Procedimientos iniciales
- Grabación/reproducción
- Uso correcto de la videocámara
- Almacenamiento de películas y fotos con una computadora
- Preparación de una computadora (Windows)
- Inicio de PMB (Picture Motion Browser)
- Selección del método para crear un disco (computadora)
- Creación de un disco con una pulsación (One Touch Disc Burn)
- Importación de películas y fotos a una computadora
- Creación de un disco AVCHD
- Creación de un disco con calidad de imagen de definición estándar (STD) que se puede reproducir en reproductores de DVD comunes
- Almacenamiento de imágenes en un dispositivo externo
- Personalización de la videocámara
- Información complementaria
- Referencia rápida
65
Additional information
US
The recording stops.
The temperature of your camcorder is
extremely high/low. Turn off your camcorder
and leave it for a while in a cool/warm place.
”PMB” cannot be installed.
Check the computer environment or
installation procedure required to install
“PMB” (p.
36).
”PMB” does not work correctly.
Quit “PMB” and restart your computer.
The camcorder is not recognized by the
computer.
Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
Disconnect the USB cable from the computer
and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in an orderly manner.
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C:04:
The battery pack is not an “InfoLITHIUM”
battery pack V series. Use an “InfoLITHIUM”
batt
ery pack (V series) (p. 15).
Connect the DC plug of the AC Adaptor to
y
our ca
mcorder securely (p. 15).
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E::
Follow the steps from to on page 64.
The internal hard disk of your camcorder is
full. Delete unnecessary images on the internal
hard di
sk (p. 34).
An error may have occurred with the internal
hard disk of your camcorder.
Battery power is low.
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
The temperature of your camcorder is getting
high. Turn off your camcorder and leave it in
a cool place.
The temperature of your camcorder is low.
Make the camcorder warm.
No memory card is inserted (p. 21).
When the indicator flashes, there is not
enough free space for recording images. Delete
unn
ecess
ary images (p. 34), or format the
memory card after storing the images on other
media.