Operating Guide
Table Of Contents
- US
- IMPORTANT SAFETY INSTRUCTIONS
- Read this first
- Operation flow
- Table of contents
- Getting started
- Recording/Playback
- Making good use of your camcorder
- Saving movies and photos with a computer
- Preparing a computer (Windows)
- Starting PMB (Picture Motion Browser)
- Selecting the method for creating a disc (computer)
- Creating a disc with one touch (One Touch Disc Burn)
- Importing movies and photos to a computer
- Creating an AVCHD disc
- Creating a standard definition image quality (STD) disc that can be played on ordinary DVD players
- Saving images with an external device
- Customizing your camcorder
- Additional information
- Quick reference
- ES
- Lea este apartado en primer lugar
- Flujo de funcionamiento
- Índice
- Procedimientos iniciales
- Grabación/reproducción
- Uso correcto de la videocámara
- Almacenamiento de películas y fotos con una computadora
- Preparación de una computadora (Windows)
- Inicio de PMB (Picture Motion Browser)
- Selección del método para crear un disco (computadora)
- Creación de un disco con una pulsación (One Touch Disc Burn)
- Importación de películas y fotos a una computadora
- Creación de un disco AVCHD
- Creación de un disco con calidad de imagen de definición estándar (STD) que se puede reproducir en reproductores de DVD comunes
- Almacenamiento de imágenes en un dispositivo externo
- Personalización de la videocámara
- Información complementaria
- Referencia rápida
11
US
Notes on use
Do not do any of the following. Otherwise, the
recording media may be damaged, recorded
images may be impossible to play back or may
be lost, or other malfunctions could occur.
ejecting the memory card when the access
l
amp (p
. 22) is lit or flashing
removing the battery pack or AC Adaptor
from the camcorder, or applying mechanical
shock or vibration to the camcorder when the
(Movie)/ (Photo) lamps (p. 23) or the
access lamp (p. 22) are lit or flashing
When using a shoulder belt (sold separately), do
not crash the camcorder against an object.
Do not use your camcorder in very loud areas.
On the drop sensor (HDR-XR350/
XR350V)
To protect the internal hard disk from shock
by dropping, the camcorder has a drop sensor
function. When a drop occurs, or under a non-
gravity condition, the block noise made when
this function is activated by the camcorder may
also be recorded. If the drop sensor catches a
drop repeatedly, recording/playback may be
stopped.
Note on using the camcorder at high
altitudes (HDR-XR350/XR350V)
Do not turn on the camcorder in a low-pressure
area, where the altitude is more than 5,000
meters (16,000 feet). Doing so may damage the
internal hard disk drive of your camcorder.