Operating Instructions
Table Of Contents
- Table of Contents
- Foreword
- Overview
- Precautions
- Locations and Functions of Parts
- Installation
- Preparations with the Camera (HDLA1500/1505)
- Preparations with the Adaptor
- Mounting the Camera in the Adaptor
- Attaching a Large Viewfinder (HDLA1500/1507)
- Attaching a Large Studio Lens (HDLA1500/1505)
- Mounting on the Tripod
- Connecting the Camera Cables
- Attaching the Number Plates
- Attaching the Supplied Plate
- Specifications
22
Installation
Attaching the Supplied Plate
If the unfinished surface of the front lens mount is exposed
after attaching a lens, use the supplied plate (not available
for HDLA1507) to avoid leaving this surface exposed. The
supplied plate is not technically necessary, but is suggested
for aesthetic purposes.
Attachment procedure
1
Remove the three blind bushes from the screw holes in
the side panel.
2
Attach the plate using the two supplied screws
(+B4×6).
Do not use the supplied plate if the lens and lens mount
profiles mate precisely (no unfinished surfaces exposed).
Doing so will create a space between the lens and lens
mount, resulting in inaccurate focal length adjustment.
Unfinished surface of lens mount may be
exposed, depending on the lens attached.
Blind bushes
Screws (+B4×6)
Plate
Note
Gap between lens
and mount