Operating Instructions

13
Locations and Functions of Parts
s SCREEN SIZE MARKER switch
Used to control the display of the screen size marker as
follows:
ON ( ): Areas outside the specified ratio area will be
darkened.
ON ( ): The screen size marker (white lines) will be
displayed.
OFF: The screen size marker will not be displayed.
t MARKER switch
Used to control the display of the marker as follows:
ON: A marker selected from the menu will be displayed on
the viewfinder screen.
OFF: The marker will not be displayed.
u UP TALLY switch [1500][1505]
Set whether or not the camera’s Up Tally lamp and the
lens’ tally lamp will light when the camera receives a red
tally signal.
ON: The tally lamps will light.
OFF: The tally lamps will not light.
v DISPLAY switch
The functions of the DISPLAY switch are as follows:
ON: Text and messages describing the camera settings and
operating status may be displayed on the viewfinder
screen.
OFF: Status messages will not appear on the viewfinder
screen.
MENU: Menus for camera settings will be displayed on
the viewfinder screen.
w MENU switch and control
Use the control to select camera’s menu items or change
setting values in the menus displayed on the viewfinder
screen.
The functions of the switch are as follows:
ENTER: Confirm the camera’s menu or page selected
using the MENU control, or confirm setting values.
CANCEL: Cancel menu setting values or return to the
previous menu page.
x ASSIGNABLE switch
A function can be assigned with a camera menu operation.
Control panel (right)
a Back tally lamp
This lamp lights red when a red tally signal is applied.
The lamp lights green when a green tally signal is applied.
You can display the camera number selected with the
menu.
When red and green tally signals are applied
simultaneously, the left half lights red and the right half
lights green.
b FOCUS ASSIST BAR switch
Set the focus indicator to ON/OFF.
ON: You can see the focus indicator on the viewfinder
screen.
OFF: The focus indicator is not displayed.
c ZOOM LINK switch
Set the VF detail level at the full WIDE position to ON/
OFF.
ON: This function is enabled.
OFF: This function is disabled.
d COLOR DETAIL switch
You can set the color detail function to ON/OFF.
ON: This function is enabled.
OFF: This function is disabled.
COLOR
DETAIL
VF ASSIGN
ON
OFF
ZOOM
LINK
ON
OFF
FOCUS
ASSIST BAR
VF DTL
ON
OFF
a Back tally lamp
b FOCUS ASSIST BAR switch
c ZOOM LINK switch
d COLOR DETAIL switch
e VF ASSIGN switch