Help Guide (Web manual)

Quantization bits: 16 bits
Note
No copy protected files in any of the above formats can be played. If you transfer
copy protected files to the HDD AUDIO PLAYER, music information of the copy
protected files will appear in gray and you will not be able to select it.
Only 2ch files in the above formats are supported.
Playing formats other than those above may produce noise or even damage the
speakers if played at a high volume.
[79] Specifications/Notes
Design and specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION (for the USA and
Canada only):
With 4 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 32 watts per
channel minimum RMS power, with no more than 10% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
POWER OUTPUT (models except for China): 40 W + 40 W (4 ohms, 1 kHz, THD
10%)
POWER OUTPUT (models for China): 38 W + 38 W (4 ohms, 1 kHz, THD 10%)
Rated Power Output (models except for China): 35 W + 35 W (4 ohms, 1 kHz, THD
0.9%)
Speaker impedance match: 4 ohms - 16 ohms
S/N ratio: 100 dB (20 kHz LPF, A Network)
Frequency response: 10 Hz - 100 kHz (+0 dB, –3 dB) (4 ohms, LINE IN)
Network section
Wired LAN
1000BASE-T/100BASE-TX/10BASE-T
Wireless LAN