Help Guide (Web manual)

authenticating the connection with each other.
When the certification is completed, a confirmation screen of the network name
(SSID) and security key (WEP/WPA) appears.
8. Select [Next] on the confirmation screen.
9. When the setup is completed, select [OK] on the screen.
Note
You cannot cancel the connection after the HDD AUDIO PLAYER has started
connecting to the network.
Do not turn the power off while the HDD AUDIO PLAYER is connecting to the
network.
[35] Playing music
Playable audio file formats
The following audio file formats can be played on the HDD AUDIO PLAYER.
Note
Only the LPCM 2ch audio format can be played when the signal is input through
the OPTICAL IN or COAXIAL IN jack. (The HDD AUDIO PLAYER supports the
LPCM format with sampling frequencies up to 96 kHz for signals input through the
OPTICAL IN jack. 176.4 kHz and 192 kHz sampling frequencies are not
supported.)
Playing other formats may produce noise or even damage the speakers if played
at a high volume.
DSD (DSF, DSDIFF)
Extensions: .dsf, .diff
Sampling frequency: 2.8224 MHz, 5.6448 MHz
LPCM (WAV, AIFF)
Extensions: .wav, .aif, .aiff
Sampling frequency: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Quantization bits: 16 bits, 24 bits, 32 bits (*)