Help Guide (Web manual)

Method 3. Setting up a network connection by adding a new access point
If your wireless LAN router/access point supports the (WPS) PIN
code configuration method
If an access point supports the (WPS) PIN (Personal Identification Number) code
connection, you can set up a wireless connection by entering the (WPS) PIN code of
the HDD AUDIO PLAYER into the wireless LAN router/access point.
Confirm the operations of your wireless LAN router/access point, then refer to the
following link for details.
Method 4. Setting up a network connection using the (WPS) PIN code
configuration method
[31] Wi-Fi network connections (wireless LAN)
Method 1. Setting up a network connection using the WPS
push button configuration method
If your wireless LAN router/access point has a WPS button, you can easily connect
the HDD AUDIO PLAYER to a Wi-Fi (wireless LAN) network.
If your wireless LAN router has an AOSS button or other easy setup button, it may
support WPS. Check the operation manual of your wireless LAN router/access point
for details.
1. Select [Settings] - [Network Settings] - [Internet Settings].
2. Select [Wireless Setup].
3. Select [Wi-Fi Protected Setup (WPS)].
4. Select [Start] and then press the WPS button on your wireless LAN
router/access point.
The HDD AUDIO PLAYER starts searching for the access point.
5. When the connection is made, confirm the registration completion message that
appears on the screen and then select [Next].
6. When the network setup is completed, select [OK] on the screen.