Help Guide (Web manual)

Settings function (Special Mode)
If a problem with the HDD AUDIO PLAYER cannot be solved using the
troubleshooting instructions, you can perform the [Special Mode] function.
1. During standby mode, press while pressing HOME.
The Special Mode screen appears.
2. Select [Clear Database] or [Reset to Default Settings].
After [Clear Database] or [Reset to Default Settings] is completed, restart the
HDD AUDIO PLAYER according to the instructions that appear in the display.
Details of displayed items
Clear Database:
This function clears the registered information but does not format the hard disk
drive. After the database is cleared, rescan the hard disk drive. Although the hard
disk drive may seem to be empty after the database is cleared, the content (music
data) still remains on the hard disk drive. Rescan the hard disk drive to restore and
display the content information.
Reset to Default Settings:
This function resets all the settings and restores the factory default settings.
Restart:
This function exits the Special Mode and restarts the HDD AUDIO PLAYER.
Restore Previous Version:
This function restores the version of the HDD AUDIO PLAYER before the update.
If you update the HDD AUDIO PLAYER when you cannot upgrade the version of
HDD Audio Remote installed on a smartphone or tablet, you may not be able to use
HDD Audio Remote.
In such a case, restore the previous version of the HDD AUDIO PLAYER.
Resetting to the factory default
If you can still not solve defects of the HDD AUDIO PLAYER, you can perform the