Help Guide (Web manual)

not appear even after scanning the drive, try the following:
Select [Special Mode] - [Clear Database], and then rescan the hard disk drive.
If the problem still persists, perform [Factory Reset], and then rescan the hard disk drive.
(*)
If you use a computer to add or delete music files on an external hard disk drive
that was previously connected to the HDD AUDIO PLAYER, then connect the
external hard disk drive to the HDD AUDIO PLAYER again, the information does
not appear correctly. Try the following:
Perform [Rescan External HDD (differing items)].
If rescanning for differing items is not effective, perform [Rescan External HDD].
If the above two methods do not solve the problem, select [Special Mode] - [Clear
Database], and then rescan the hard disk drive.
If the problem still persists, perform [Factory Reset], and then rescan the hard disk drive.
(*)
*
If you perform the Factory Reset function, all settings you have configured and all of the content
stored on the internal hard disk drive will also be deleted.
[Unformatted external HDD has been connected. Format
the HDD?] appears when you connect an external hard
disk drive to the EXT port on the rear panel of the HDD
AUDIO PLAYER.
You are connecting an external hard disk drive that has a file system which is not
supported by the HDD AUDIO PLAYER. You cannot play music files stored on the
external hard disk drive.
Any music files stored on the external hard disk drive will be deleted if you format
the external hard disk drive using the HDD AUDIO PLAYER. Also, you won’t be
able to use the external hard disk drive with other devices such as a computer,
because the external hard disk drive (USB storage) is formatted only for the HDD
AUDIO PLAYER.
Using the Clear Database function or the Reset to Default