Help Guide (Web manual)

The power is automatically turned on.
If the [Network Standby] function is set to [On], the HDD AUDIO PLAYER is turned
on when it is operated through HDD Audio Remote or music files are transferred
through HAP Music Transfer.
The remote control does not work.
Point the remote control at the remote sensor on the HDD AUDIO PLAYER.
Remove any obstructions in between the remote control and the HDD AUDIO
PLAYER.
Replace all the batteries in the remote control with new ones if they are low.
Cannot transfer music files via HAP Music Transfer.
Make sure that the HDD AUDIO PLAYER is turned on.
Check the network connection.
Make sure that the computer where the music files are stored is connected to the
same network as the HDD AUDIO PLAYER.
If the HDD AUDIO PLAYER is in normal standby mode, music files cannot be
transferred via HAP Music Transfer. Set the HDD AUDIO PLAYER to the Network
Standby mode.
You may not be able to transfer files from HAP Music Transfer if your router is set
to low power consumption mode. In this case, disable the low power consumption
mode of your router. For details, refer to the operating manual of your router.
Depending on your network environment the HDD AUDIO PLAYER may not be
displayed in the Connection window. For details, refer to the help guide of HAP
Music Transfer.
Try transferring the music files to the HDD AUDIO PLAYER by dragging and
dropping. For details, refer to “You want to transfer music files to the HDD AUDIO
PLAYER by dragging and dropping but do not know how. (for Windows)” or “You