Help Guide (Web manual)

is in standby mode.
This function is useful in the following cases:
When music files are transferred to the HDD AUDIO PLAYER using the HAP
Music Transfer application.
When you want to launch the HDD AUDIO PLAYER from the HDD Audio Remote
application.
Select [Settings] - [System Settings] - [Network Standby] from the menu to set the
Network Standby mode.
Note
The HDD AUDIO PLAYER does not enter standby mode when music files are
being transferred from your computer, smartphone or tablet or when the HDD
AUDIO PLAYER is analyzing transferred music files, even if you press the
button to switch to standby mode. The HDD AUDIO PLAYER enters standby after
all target music files are transferred and analyzed.
Hint
The HDD AUDIO PLAYER enters the Network Standby mode after 20 minutes of
no operations and no playback if [Auto Standby] is set to [On] (factory default
setting). The HDD AUDIO PLAYER does not enter the standby mode or the
Network Standby mode when an external input is selected.
[95] Dealing with problems/Inquiries
Forced shutdown of the HDD AUDIO PLAYER
In the rare case of an unusual situation, such as if the HDD AUDIO PLAYER does
not respond to operations of the buttons and controls, you can forcibly turn the power
off.
You do not need to forcibly shut down the HDD AUDIO PLAYER in normal use.
1. Press and hold on the HDD AUDIO PLAYER for 5 seconds or more.
The power lamp flashes three times and then the power turns off.
After a while, the HDD AUDIO PLAYER is automatically rebooted and enters
the standby mode or the Network Standby mode.