User manual
Table Of Contents
- Purpose of this document
- Document history
- Sony Mobile Developer World
- Table of contents
- Product overview
- Technologies in detail
- Device-to-device communications (local)
- Messaging
- Positioning – location based services
- Provisioning (OMA CP)
- Multimedia (audio, image and video)
- Synchronisation (OMA DS, EAS, Google Sync™)
- Web browser
- Memory in Android™ devices
- 1. Dynamic Memory (also known as RAM) is used by applications that run when the device is turned on. The amount of Dynamic Memory influences how many applications and operating system services can run at the same time. The Android operating system au...
- 2. System Memory (also known as “System partition” or “/system”) is used for the Android OS and for most applications that are pre-loaded from the factory. This type of memory is normally locked, and can only be changed through a firmware upg...
- 3. Internal Storage is memory used as” working” memory. It can be compared to the C: drive on a PC or to the startup disk on a Mac.
- 4. SD Card (known as “/ext_card” from a programmer’s point of view, or by other names in other Android products) is the name for the removable SD memory card in all 2014 Sony Mobile products. As described above, this External Card memory is gen...
- Trademarks and acknowledgements
White paper | Xperia™ Z2 Tablet
9 February 2014
Technologies in detail
NOTE: The information outlined below is general and levels of compliance to standards and specifications
may vary between products and markets. For more information, contact Sony Mobile Developer World or
your Sony contact person where applicable.
Device-to-device communications (local)
ANT+™ wireless technology
Connectable devices ANT+™ devices require the download of a supporting
application
Frequency band 2.4 GHz
Data transfer rate Up to 60 Kbps
Encryption AES-128
Topologies One to Many, Many to One, Peer to Peer, Star, Practical
Mesh