LCD Projection TV Operating Instructions
Table Of Contents
- Introducing the Sony LCD Projection TV
- Setting Up the LCD Projection TV
- Overview
- LCD Projection TV Front Panel and Connectors
- Installing the LCD Projection TV
- Basic Connections: Connecting a Cable or Antenna
- Connecting Optional Equipment
- Making Video Connections
- About Using SVIDEO
- VCR and Cable
- VCR and Cable Box
- Two VCRs for Tape Editing
- Satellite Receiver
- Satellite Receiver with a VCR and Cable
- DVD Player with Component Video Connectors
- DVD Player with S VIDEO and Audio Connectors
- Camcorder
- Audio Receiver
- Digital Cable Box
- Digital Satellite Receiver
- Digital Satellite Receiver with HDMI Connector
- Connecting a Device with an Optical IN Connector
- Using the CONTROL S Feature
- Using CableCARD
- Setting Up the LCD Projection TV Channel List
- Using the Remote Control
- Using the Features
- Using the Memory Stick Viewer
- Using the Menus
- Other Information
- Index
Setting Up the LCD Projection TV
25
Setting Up the LCD Projection TV
KDF-WE/WF655
2-059-370-14 (2)
Item Description
1 Memory Stick slot For inserting Memory Stick media to view on your LCD
projection TV. For details, see “Inserting and Removing a
Memory Stick” on page 82
2 Memory Stick
indicator
When the Memory Stick indicator is lit, indicates that the
Memory Stick is being read. (Do not remove the Memory
Stick when the indicator is lit.)
3 POWER Press to turn on/off the LCD projection TV.
4 POWER/
STANDBY LED
Lights up in green when the TV set is turned on. When in
standby mode, the LED lights up in red. The LED does
not light up when the main power is turned off. If the LED
blinks continuously, this may indicate the display unit
needs servicing (see “Contacting Sony” on page 119).
5 TIMER LED When lit, indicates one of the timers is set. When the
timer is set, this LED will remain lit even if the TV set is
turned off. For details, see page 116.
6 LAMP LED Lights up in red when the lamp for the light source has
burned out. For details, see “Replacing the Lamp” on page
16.
7 (IR) Infrared
Receiver
Receives IR signals from the remote control.
8 CHANNEL +/– Press to scan through channels.
9 VOLUME +/– Press to adjust the volume.
q; TV/VIDEO Press to select between the TV’s tuner and other video
equipment inputs.
The CHANNEL +
button has a tactile dot.
Use the tactile as a
reference when
operating the TV.
z
01COV.book Page 25 Thursday, February 17, 2005 8:01 PM