LCD Projection TV Operating Instructions
Table Of Contents
- Introducing the Sony LCD Projection TV
- Setting Up the LCD Projection TV
- Overview
- LCD Projection TV Front Panel and Connectors
- Installing the LCD Projection TV
- Basic Connections: Connecting a Cable or Antenna
- Connecting Optional Equipment
- Making Video Connections
- About Using SVIDEO
- VCR and Cable
- VCR and Cable Box
- Two VCRs for Tape Editing
- Satellite Receiver
- Satellite Receiver with a VCR and Cable
- DVD Player with Component Video Connectors
- DVD Player with S VIDEO and Audio Connectors
- Camcorder
- Audio Receiver
- Digital Cable Box
- Digital Satellite Receiver
- Digital Satellite Receiver with HDMI Connector
- Connecting a Device with an Optical IN Connector
- Using the CONTROL S Feature
- Using CableCARD
- Setting Up the LCD Projection TV Channel List
- Using the Remote Control
- Using the Features
- Using the Memory Stick Viewer
- Using the Menus
- Other Information
- Index
Introducing the Sony LCD Projection TV
22
KDF-WE/WF655
2-059-370-14 (2)
Push the cover back on. Make sure that the hole on the cover aligns with
the hole on the unit. Reattach the lamp cover by tightening the screw.
7 Reattach the front panel securely.
8 Tightly screw the side panel in its place.
✍ If the lamp cover screw is inserted incorrectly, the lamp may not
operate properly. In such a case, remove the screw, insert it
correctly and then tighten the screw completely (see page 126).
✍ If the lamp cover is not reattached securely, the self-diagnostic
function may be triggered and the POWER/STANDBY indicator
flashes three times (see page 126).
✍ Consult your Sony dealer for a Sony XL-2200 (for WF655 series)
replacement lamp.
✍ Take great care when replacing the lamp or plugging in/unplugging
the connecting cords. Rough handling may cause the LCD
projection TV to fall, damaging the TV, the TV stand and/or the floor.
S
T
D
/
D
U
O
P
O
W
E
R
P
R
O
01COV.book Page 22 Thursday, February 17, 2005 8:01 PM