LCD Projection TV Operating Instructions
Table Of Contents
- Introducing the Sony LCD Projection TV
- Setting Up the LCD Projection TV
- Overview
- LCD Projection TV Front Panel and Connectors
- Installing the LCD Projection TV
- Basic Connections: Connecting a Cable or Antenna
- Connecting Optional Equipment
- Making Video Connections
- About Using SVIDEO
- VCR and Cable
- VCR and Cable Box
- Two VCRs for Tape Editing
- Satellite Receiver
- Satellite Receiver with a VCR and Cable
- DVD Player with Component Video Connectors
- DVD Player with S VIDEO and Audio Connectors
- Camcorder
- Audio Receiver
- Digital Cable Box
- Digital Satellite Receiver
- Digital Satellite Receiver with HDMI Connector
- Connecting a Device with an Optical IN Connector
- Using the CONTROL S Feature
- Using CableCARD
- Setting Up the LCD Projection TV Channel List
- Using the Remote Control
- Using the Features
- Using the Memory Stick Viewer
- Using the Menus
- Other Information
- Index
Introducing the Sony LCD Projection TV
21
Introducing the Sony LCD Projection TV
KDF-WE/WF655
2-059-370-14 (2)
5 Pull out the lamp.
Loosen the right screw on the cover with a coin or similar object.
Remove the screw from the lamp cover. Pull down the cover toward you.
Unscrew the lamp and pull out the lamp horizontally.
6 Place the new lamp into its place, then tighten the screw.
✍ The lamp is very hot immediately after use. Never touch the front
glass of the lamp or the surrounding parts.
✍ After it has cooled, place the used lamp into the empty box of the
replacement lamp. Never put the used lamp into a plastic bag.
(Continued)
01COV.book Page 21 Thursday, February 17, 2005 8:01 PM