LCD Projection TV Operating Instructions

Using the Menus
116
KDF-WE/WF655
2-059-370-14 (2)
Timer 1
Timer 2
You can use the Timers to program the
LCD projection TV to turn on and off
and tune to a specific channel at two
scheduled viewing times.
Timer 1 and Timer 2 cannot be set until you set the Current
Time.
1 Press V or v to highlight Timer 1 or Timer 2. To set the
timer, press b.
✍ To go directly to programming Timer 1 or 2, press
instead of pressing b.
2 Press V or v to highlight one of the following options, then
press .
Program Select to set the Timer by day, time,
duration, and channel.
Off Select to turn off the Timer. (Your
previous settings are saved.)
3 If you selected Program in step 2, press V and v to set the
day(s), hour, minute, duration, and channel number. Press
or press b to confirm each setting and move to the
next setting.
Press B to go back to the previous setting.
4 Press MENU to exit the menu screen. An LED on the front
panel will light, indicating the Timer has been set.
Current Time You can set the current time.
1 Press to select Current Time.
2 Press V and v to set the current time (day, hour, minute,
and AM/PM). Press (or press b) to confirm each
setting and move to the next setting. Press B to go back the
previous setting.
3 Press MENU to exit the menu screen.
Diagnostics Display diagnostics information about the TV. This can be
useful in providing information to an authorized technician or
repair person.
CableCARD This list of selectable CableCARD options will vary, depending
on your cable service provider.
Option Description Displays...
01COV.book Page 116 Thursday, February 17, 2005 8:01 PM