LCD Projection TV Operating Instructions
Table Of Contents
- Introducing the Sony LCD Projection TV
 - Setting Up the LCD Projection TV
- Overview
 - LCD Projection TV Front Panel and Connectors
 - Installing the LCD Projection TV
 - Basic Connections: Connecting a Cable or Antenna
 - Connecting Optional Equipment
- Making Video Connections
 - About Using SVIDEO
 - VCR and Cable
 - VCR and Cable Box
 - Two VCRs for Tape Editing
 - Satellite Receiver
 - Satellite Receiver with a VCR and Cable
 - DVD Player with Component Video Connectors
 - DVD Player with S VIDEO and Audio Connectors
 - Camcorder
 - Audio Receiver
 - Digital Cable Box
 - Digital Satellite Receiver
 - Digital Satellite Receiver with HDMI Connector
 
 - Connecting a Device with an Optical IN Connector
 - Using the CONTROL S Feature
 - Using CableCARD
 - Setting Up the LCD Projection TV Channel List
 
 - Using the Remote Control
 - Using the Features
 - Using the Memory Stick Viewer
 - Using the Menus
 - Other Information
 - Index
 
Setting Up the LCD Projection TV
34
KDF-WE/WF655
2-059-370-14 (2)
Cable Box and 
Antenna
For best results, use this connection if:
❑
Your cable company scrambles some channels, such as premium 
channels (which requires you to use a cable box), but does not scramble 
all channels.
❑ You do not have a VCR. (If you have a VCR, see pages 39 and 40.)
With this connection you can:
❑
Use the LCD projection TV’s remote control to change channels 
coming through the cable box to the LCD projection TV’s cable input. 
(You must first program the remote control for your specific cable box; 
see “Programming the Remote Control” on page 62.) 
❑ Use the LCD projection TV’s remote control to change channels 
coming directly into the LCD projection TV’s VHF/UHF input jack. 
Notes on Using This Connection
Before connecting a 
cable box, see “Using 
CableCARD” on page 56.
✍ This connection will allow you to take advantage of viewing the pictures 
in Dual Picture Features such as Twin View, Freeze, etc.
IN OUT
VHF/UHF Cable
CATV cable
Rear of LCD projection TV
Cable box
Coaxial 
cable
Antenna
cable
To Do This ... Do This ...
Use the cable box Tune the LCD projection TV to the channel the cable box is set to 
(usually channel 3 or 4) and then use the cable box to switch 
channels.
Set up the LCD projection TV remote control to 
operate the cable box
Program the remote control. See “Programming the Remote 
Control” on page 62.
Activate the remote control to operate the cable 
box
Press
SAT/CABLE FUNCTION once, and the SAT/CABLE
indicator lights up.
Prevent the accidental switching of TV channels When using the cable box, the LCD projection TV must stay on the 
channel the cable box is set to (usually channel 3 or 4). You can use 
the LCD projection TV’s Channel Fix feature to lock in a specific 
channel. For details, see “Using the Channel Menu” on page 106.
Switch
the LCD projection TV’s input between 
the cable box and cable 
Press
ANT to switch back and forth between the LCD projection 
TV’s VHF/UHF (scrambled channels) and CABLE (unscrambled) 
inputs.
01COV.book Page 34  Thursday, February 17, 2005 8:01 PM










