Help Guide

Help Guide
Interchangeable Lens Digital Camera
ILME-FX3
Shooting still images (Intelligent Auto)
This section describes how to shoot still images in the [Intelligent Auto] mode. In the [Intelligent Auto] mode, the camera
automatically focuses and automatically determines the exposure based on the shooting conditions.
To select the focus mode yourself (
Focus Mode / Focus Area)
Specifying a focus mode, such as selecting
(Single-shot AF) for landscapes or still subjects and selecting
(Continuous AF) for moving subjects, makes it easier to focus on the desired subject. You can also specify the focus
position and range using [
Focus Area].
Shooting while focusing on human eyes
The [
Face/Eye Prior. in AF] function under [Face/Eye AF] is enabled in the default settings, so you can use the Eye
AF function immediately.
Press the MODE (Mode) button, use the control wheel to select [Intelligent Auto], and press the center.
The shooting mode will be set to
(Intelligent Auto).
1
Adjust the monitor angle, and hold the camera.
2
When a zoom lens is mounted, enlarge images by using the zoom lever or the zoom ring.
3
Press the shutter button halfway down to focus.
When the image is in focus, a beep sounds and the indicator (such as
) lights up.
4
Press the shutter button fully down.
5
86