User Guide

[152] How to Use Menu operations Wireless
Access point settings
You can register your access point manually. Before starting the procedure, check the SSID
name, security mode, and password of the access point. The password may be preset in
some devices. For details, see the access point operating instructions or contact the
administrator.
1. - [Wireless] - [ Setting] - [Access point settings].
2. Select the access point you want to register.
The desired access point is displayed:
Select the access point.
The desired access point is not displayed:
Select [Manual setting], then enter the SSID name of the access point, and then select
the security mode.
3. Enter the password, and then select [Next] - [Register].
Access points without the icon do not require a password to be entered.
Other setting items
Depending on the status or the setting method of your access point, there may be more
setting items.
WPS PIN:
Displays the PIN to enter to the connected device.
IP address setting:
Select [Auto] or [Manual].
IP address:
If you are entering the IP address manually, enter the fixed address.