User Guide

[83] How to Use Using the Wi-Fi function Controlling other cameras through this
product
Shooting with this product and other cameras with Multi
Camera Control
This function enables you to record images using this product and several cameras
simultaneously by connecting them to Wi-Fi. You can also perform some basic operations of
the connected cameras, such as configuring the settings, from this product.
Recorded images can be edited with PlayMemories Home, including editing such as creating
a PinP (Picture in Picture; an image with an inset window of another image) clip.
1. Connect this product and other cameras via Wi-Fi.
For details on the connection method, see “Connecting this product to one camera
with Multi Camera Control (Single Connection) ” and “Connecting this product to
more than one camera with Multi Camera Control (Multi Connection) .”
A: This product
B: Shooting modes ( Movie, Still Image, Interval Shoot, Audio) of connected
cameras
C: Various settings of connected cameras
2. Select the displayed icons such as , or those in B in the figure above, select
, then configure the desired settings for each connected camera.
Among the menu items described in “Menu items that you can set” below, only the
items that can be configured on the connected camera will be displayed.
The status of the selected camera can be checked on the LCD monitor of this
product.
3. Press the START/STOP button of this product.
All devices are connected to this product will start recording. is displayed on the
icons of this product and the cameras that are recording movies.
By selecting , or icons displayed in B in the figure above during shooting,
you can check the image being recorded with the connected camera on the LCD
monitor of this product.