A-CED-100-21(1) Color Camera Module Technical Manual FCB-PV480 2006 Sony Corporation
Table of Contents Features ..................................................................... 3 Precautions ................................................................ 4 Locations of Controls ............................................... 5 Basic Functions ......................................................... 6 Overview of Functions ................................................ 6 Eclipse ......................................................................
Overview Features • The FCB camera is equipped with a CCD which adopts the all-pixel read-out method for all 330,000 effective picture elements “progressive scan” and the primary color filter, enabling use of square pixels. The adoption of this type of CCD enables the high resolution and high color reproduction of this camera. Thus, this is an ideal camera for use in capturing digital images. • 18× optical zoom. • Digital data output, supporting three output modes.
Overview Precautions Software Use of the demonstration software developed by Sony Corporation or use of the software with customer developed application software may damage hardware, the application program or the camera. Sony Corporation is not liable for any damages under these conditions. Operation Start the camera control software on your computer after you turn on the camera and the image is displayed. Operation and Storage Locations Do not shoot images that are extremely bright (e.g.
Locations of Controls Front Left side Rear Bottom 1 Lens 2 CN702 connector 3 CN701 connector 4 CN501 connector 5 CN403 connector (for key switch) 6 TELE button 7 WIDE button 8 S501 Switch Used to change the output mode between 16-bit and 8-bit output modes. 9 Tripod screw holes When a tripod is used, please use 10 mm (13/32 in.) screws to attach it to the camera. Also, please be sure to attach the tripod securely.
Basic Functions Basic Functions Overview of Functions VISCA commands are the basis of camera control. Timing Chart As VISCA Command processing can only be carried out one time in a Vertical cycle, it takes the maximum 1V cycle time for an ACK/Completion to be returned. If the Command ACK/Completion communication time can be cut shorter than the1V cycle time, then every 1V cycle can receive a Command. General Commands Commands • Power On/Off Powers the camera on and off.
Basic Functions Zoom The FCB camera employs an 18× optical zoom lens. Lens specifications: Optical 18×, f = 4.1 to 73.8 mm (F1.4 to F3.0) The horizontal angle of view is approximately 48 degrees (wide end) to 2.8 degrees (tele end). You can activate the zoom in the following two ways: • By pressing the TELE or WIDE buttons on the camera itself. • Using a VISCA Command Using Standard Mode Using Variable Mode There are eight levels of zoom speed.
Basic Functions White Balance White Balance has the following modes, all of which can be set using VISCA Commands. • Auto White Balance Auto white balance obtains the proper color reproduction by automatically adjusting white balance to ensure a white object always looks white. This function computes the white balance value output using color information from the entire screen.
Basic Functions AE – Iris Priority The iris can be set freely by the user to 18 steps between F1.4 and Close. The gain and shutter speed are set automatically according to the brightness of the subject. Data 11 10 0F 0E 0D 0C 0B 0A 09 Setting value F1.4 F1.6 F2.0 F2.4 F2.8 F3.4 F4.0 F4.8 F5.6 Data 08 07 06 05 04 03 02 01 00 Setting value F6.8 F8.0 F9.6 F11 F14 F16 F19 F22 CLOSE AE – Manual The shutter speed (22 steps), iris (18 steps) and gain (16 steps) can be set freely by the user.
Basic Functions Exposure Compensation Auto ICR Mode Exposure compensation is a function which offsets the internal reference brightness level used in the AE mode by steps of 1.5 dB. Auto ICR Mode automatically switches the setting needed for attaching or removing the IR Cut Filter. With a pre-set level of darkness, the IR Cut Filter is automatically disabled (ICR ON), and the infrared sensitivity is increased. With a pre-set level of brightness, the IR Cut Filter is automatically enabled (ICR OFF).
Basic Functions When ICR is ON There are threshold levels at which ICR is switched from ON to OFF. Usually, the 1st threshold level is used to switch ICR from ON to OFF. The following figure shows the process by which ICR is switched from ON to OFF. Camera ID The ID can be set up to 65,536 (0000 to FFFF). As this will be memorized in the nonvolatile memory inside the camera, data will be saved regardless of whether it has been backed up.
Basic Functions Digital Image Output Modes Three kinds of digital image output modes are available. Also, 30 fps and 25 fps modes are available for each of these digital image output modes. In total, six digital image output modes are supported. I/F mode Output SYNC Frame rate Clock 16bit Progressive YUV HSYNC/ VSYNC 29.97 fps / 25.0 fps 13.5 MHz YUV HSYNC/ VSYNC 29.97 fps / 25.0 fps 27.0 MHz 8-bit 4:2:2 SAV/EAV 29.97 fps / 25.0 fps 27.
Basic Functions Title Display The camera can be given a title containing up to 20 characters such as “ENTRANCE” or “LOBBY”. The position of the first character (horizontal, vertical) of the title, blinking state, and color can also be changed.
Basic Functions Privacy Zone Function Features Privacy Zone masking protects private objects and areas such as house windows, entrances, and exits which are within the camera’s range of vision but not subject to surveillance. Privacy zone masking can be masked on the monitor to protect privacy. • Mask can be set on up to 24 places according to Pan/ Tilt positions. • Mask can be displayed on 8 places per screen simultaneously. • Privacy Zones are displayed according to priority in alphabetical order.
Basic Functions Privacy Zone Setting Command List Command Set Command Command Packet Comments CAM_PrivacyZone SetMask 8x 01 04 76 mm nn 0r 0r 0s 0s FF Setting Mask(Size) See “mm: mask setting list”, “nn: setting”, and “rr: w, ss: h” in “Parameters” on page 16. Display 8x 01 04 77 pp pp pp pp FF Setting Mask Display On/Off See “pp pp pp pp: Mask bit” in “Parameters” on page 16.
Basic Functions Parameters mm: Mask setting list nn: Setting Mask Name mm (Hex) Mask Name Mask_A 00h Mask_B 01h Mask_C mm (Hex) nn Setting Mask_M 0Ch 00 Mask_N 0Dh Resetting the zone size (the value of w, h) for the existing mask. 02h Mask_O 0Eh 01 Mask_D 03h Mask_P 0Fh Setting newly the zone size (the value of w, h).
Basic Functions Details of Setting Commands Set Mask Command: 8x 01 04 76 mm nn 0r 0r 0s 0s FF Parameters: mm Setting Mask See “mm: mask setting list” in “Parameters” on page 16. nn Selects new setting or resetting for the zone. See nn: Setting” in “Parameters” on page 16. rr Sets the half value “w” of the Mask Width. ss Sets the half value “h” of the Mask Height. See “rr: w, ss: h” in “Parameters” on page 16. Comments: To set the mask, first display the object at the center of the screen.
Basic Functions Grid Alarm Function Use the grid displayed on the screen to set mask positions (see the figure below). This function instructs the camera to detect movement within the monitoring area and then send an alarm signal automatically. A High level signal is output when camera detects movement inside the monitoring area. A Low level signal is output when object stops moving.
Basic Functions ALARM Setting Command List Command Set Command Command Packet Comments CAM _ Alarm On 8x 01 04 6B 02 FF Alarm start Off 8x 01 04 6B 03 FF Alarm stop Set Mode 8x 01 04 6C pp FF Mode Setting *Select one from 13 modes Set Day Night Level 8x 01 04 6D 0p 0p 0p 0q 0q 0q FF ppp: Day distinction AE level qqq: Night distinction AE level.
Basic Functions Flowchart of 12 Modes Function Mode “00” Set the Focus Position Hysteresis. Set to the factory preset Alarm On Focus Position into memory AE moves Focus moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. Focus goes back to the previous position.
Basic Functions Mode “01” Alarm On Focus Position into memory Hysteresis is set to the factory preset. AE moves. Focus moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. AE does not move for a period of time. AE does not move for a period of time. Low level signal output Update the Focus position data.
Basic Functions Mode “02” Set the AE level Hysteresis. Set to the factory preset Alarm On AE Level into memory AE moves AE moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. AE goes back to the previous level.
Basic Functions Mode “03” Alarm On AE level into memory Hysteresis is set to the factory preset. AE moves. AE moves outside of the hysteresis. High level signal output * * Repeat this loop until Alarm off. AE does not move for a period of time. AE does not move for a period of time.
Basic Functions Details of Mode “01”/”03" T1: Reset interval timer (5sec) T2: Detect timer (2sec) T3: High level signal count timer (2sec) Alarm ON Hysteresis Reset Focus Pos AE Level Reset Reset Reset T1 T1 T1 T2 T3 High Signal level Low Low T1: T2: T3: Mode “04” High output result of mode “00” High output result of mode “02” High output Low output 24
Basic Functions Mode “05” High output result of mode “00” High output result of mode “03” High output Low output Mode “06” High output result of mode “01” High output result of mode “02” High output Low output Mode “07” High output result of mode “01” High output result of mode “03” High output Low output 25
Basic Functions Mode “08” High output result of mode “00” High output result of mode “02” High output High output result of mode “02” High output High output Low output Mode “09” High output result of mode “00” High output result of mode “03” High output High output result of mode “03” High output High output Low output Mode “0A” High output result of mode “01” High output result of mode “02” High output High output result of mode “02” High output High output Low output 26
Basic Functions Mode “0B” High output result of mode “01” High output result of mode “03” High output High output result of mode “03” High output High output Low output Day-Night Mode (Mode “0C”) Set the Day-Night Mode and the Day/ Night AE level. Setting by the VISCA Cmd. Starting distinction between Day and Night. Alarm On AE move Yes Brightness is higher than Day AE level. Yes No No Brightness is higher than Night AE level.
Basic Functions Eclipse Test Method (Random vibration) • Fix the camera at the four fixation points of the base using M2 screws. • Perform the random vibration test under the following conditions in the X, Y and Z directions for 20 minutes in each direction. • The camera vibration specification is to have no malfunction after this test. 14.18 11.13 When designing the housing, refer to the dimensional allowance as shown in the figure below. Vibration Specifications Effective overall value 14.
Basic Functions Key Switch Circuitry S101 S112 S121 DZOOM S102 DZOOM WIDE S103 12P CN101 a) GND 1 GND 2 KEY_AD0 3 KEY_AD1 4 KEY_AD2 5 S122 R119 1500 KEY_AD3 6 KEY_AD4 7 KEY_AD5 8 KEY_AD6 9 AUTO WB S106 KEY_AD7 10 NC 11 STROBE 12 S108 TELE FAST S123 S132 S139 R124 2200 R131 3900 NEAR FAR ONE PUSH AF INFINITY S115 S124 S133 S140 S150 R108 1200 R116 1500 R125 2200 R132 3900 R142 8200 BRIGHT SHUTTER IRIS BACK LIGHT AUTO SLOW SHUTTER S116 S127 S134 S14
Basic Functions Key Function Specifications Classification Name Function Button operation Mode display ZOOM WIDE Move ZOOM to WIDE side quickly. Pressing repeatedly allowed. ZOOM bar displayed for 3 s. WIDE SLOW Move ZOOM to WIDE side slowly. Pressing repeatedly allowed. ZOOM bar displayed for 3 s. TELE SLOW Move ZOOM to TELE side slowly. Pressing repeatedly allowed. ZOOM bar displayed for 3 s. TELE FAST Move ZOOM to TELE side quickly. Pressing repeatedly allowed.
Basic Functions Classification Name Function Button operation Mode display FEATURE FREEZE Capture still image. Switch on/off. FREEZE indication LRREVERSE Horizontal reversal Switch on/off. Horizontal reversal indication BLACK & WHITE Black-and-white output Switch on/off. B&W display NEGA ART Negative art output Switch on/off. Neg Art display MUTE Mute video output Switch on/off. “MUTE” (character display) DISPLAY Display Switch on/off. TITLE Title setting Request setting.
Basic Functions Initial Settings, Custom Preset and Backup Initial settings for the various functions are indicated in the “Initial settings” column. The “Custom preset” column indicates whether the custom preset function can be used to store the settings. The function enables the stored settings to be recalled automatically when the camera is turned on. The “Standby backup” column indicates whether the data is preserved even when the camera is powered OFF.
Basic Functions Custom Standby preset backup Off a a Title Setting — a a Mask Setting — a a Mask Display On/Off Off a a Mask Color Setting — a a Alarm On/Off Off a a Alarm Mode — a a Alarm Detect Level — a a E-Flip On/Off Off a a Privacy Zone On/Off Off a a Privacy Zone Setting — a a Off a a 0000h a a Mode/Position Title Display On/Off Key Lock On/Off Camera ID Initial settings Note The number of times data can be written to EEPROM (by executing Custom
Mode × × Lens Initialization a) × during recalling from key × × × × Camera Memory Set/Reset Camera Memory Recall × × × × × × × Focus Near Limit AF Sensitivity Normal/Low × × × × × One Push AF Focus Infinity AF Mode Norm/Interval/Zoom × × Focus Auto/Manual AF Activation Time/Interval Setting × × × × Focus Far/Near/Stop Focus Direct × × × × × Zoom Direct Initializing × Zoom Focus Direct Zoom Tele/Wide/Stop Power Off a a Power On/Off Lens a a a a a a IF_Clear
× × × × × × × × Exposure Compensation Setting Backlight On/Off SpotAE On/Off SpotAE Setting × × × × × × × Gain Setting Bright Setting × × × × × Shutter Setting Iris Setting Slow Shutter Auto/Manual × × Bright Exposure Compensation On/Off × × × × Shutter Priority Iris Priority × × × × AE Full Auto Initializing AE Manual Mode Power Off × × BGain Setting Exposure × × × × One Push WB × × RGain Setting Initializing Power Off WB Mode Switchover Mode White Bal
× × × × × × Privacy Zone Setting Key Lock On/Off ID Write × × × × Title Setting × × Mute On/Off Privacy Zone On/Off/Clear × × × × Auto ICR On/Off Display On/Off × × × × Picture Effect Setting ICR On/Off × × × × LR_Reverse On/Off × × Aperture Setting Freeze On/Off Initializing Power Off Mode Others a a a a a a a a a a a a × a a a × × a a × a a × a a Freeze On Power On a a a a a a a × × × × × × MemRecall Basic Functions 36
Command List Command List VISCA1)/RS-232C Commands This Manual outlines an RS-232C control protocol and command list for certain Sony cameras from which control software can be developed. THIS CONTROL PROTOCOL AND COMMAND LIST IS PROVIDED BY SONY ON AN “AS-IS BASIS” WITHOUT WARRANTY OF ANY KIND.
Command List VISCA Communication Specifications assigned address 2 is 82H. In the command list, as the header is 8X, input the address of the camera at X. The header of the reply packet from the camera assigned address 1 is 90H. The packet from the camera assigned address 2 is A0H. Some of the commands for setting cameras can be sent to all devices at one time (broadcast). In the case of broadcast, the header should be hexadecimal 88H. When the terminator is FFH, it signifies the end of the packet.
Command List Responses for Commands and Inquiries Command Execution Cancel ● ACK message Returned by the FCB camera when it receives a command. No ACK message is returned for inquiries. To cancel a command which has already been sent, send the Cancel command as the next command. To cancel one of any two commands which have been sent, use the cancel message. ● Completion message Returned by the FCB camera when execution of commands or inquiries is completed.
Command List VISCA Device Setting Command Before starting control of the FCB camera, be sure to send the Address command and the IF_Clear command using the broadcast function. For VISCA Network Administration ● Address Sets an address of a peripheral device. Use when initializing the network and when receiving the network change message indicated below. VISCA Interface and Inquiry ● CAM_VersionInq Returns information on the VISCA interface.
Command List VISCA Command/ACK Protocol Command Command Message Reply Message Comments General Command 81 01 04 38 02 FF (Example) 90 41 FF (ACK)+90 51 FF (Completion) 90 42 FF 90 52 FF Returns ACK when a command has been accepted, and Completion when a command has been executed. 81 01 04 38 FF (Example) 90 60 02 FF (Syntax Error) Accepted a command which is not supported or a command lacking parameters.
Command List VISCA Camera-Issued Messages ACK/Completion Messages Command Messages Comments ACK z0 4y FF (y:Socket No.) Returned when the command is accepted. Completion z0 5y FF (y:Socket No.) Returned when the command has been executed. z = Device address + 8 Error Messages Command Messages Comments Syntax Error z0 60 02 FF Returned when the command format is different or when a command with illegal command parameters is accepted.
Command List FCB Camera Commands Command List (1/4) Command Set Command Command Packet AddressSet Broadcast 88 30 01 FF IF_Clear Broadcast 88 01 00 01 FF CommandCancel CAM_Power CAM_Zoom CAM_Focus AF Sensitivity CAM_AFMode Comments 8x 2p FF p: Socket No.
Command List Command List (2/4) Command Set CAM_WB CAM_RGain CAM_BGain CAM_AE Command Command Packet Comments Auto 8x 01 04 35 00 FF Normal Auto Indoor 8x 01 04 35 01 FF Indoor mode Outdoor 8x 01 04 35 02 FF Outdoor mode One Push WB 8x 01 04 35 03 FF One Push WB mode ATW 8x 01 04 35 04 FF Auto Tracing White Balance Manual 8x 01 04 35 05 FF Manual Control mode One Push Trigger 8x 01 04 10 05 FF One Push WB Trigger Manual Control of R Gain Reset 8x 01 04 03 00 FF Up 8x 01 04 03
Command List Command List (3/4) Command Set Command CAM_Aperture CAM_LR_Reverse CAM_Freeze CAM_PictureEffect CAM_PictureFlip CAM_ICR CAM_AutoICR CAM_Memory CAM_CUSTOM Command Packet Comments Reset 8x 01 04 02 00 FF Aperture Control Up 8x 01 04 02 02 FF Down 8x 01 04 02 03 FF Direct 8x 01 04 42 00 00 0p 0q FF pq: Aperture Gain On 8x 01 04 61 02 FF Mirror Image ON/OFF Off 8x 01 04 61 03 FF On 8x 01 04 62 02 FF Off 8x 01 04 62 03 FF Off 8x 01 04 63 00 FF B&W 8x 01 04 63 04 F
Command List Command List (4/4) Command Set Command Command Packet Comments CAM_PrivacyZone SetMask 8x 01 04 76 mm nn 0r 0r 0s 0s FF mm: Mask Settings nn 00: Modify, 01: New rr: W, ss:H Display 8x 01 04 77 pp pp pp pp FF Mask Display ON/OFF pp pp pp pp: Mask Settings (0: OFF, 1: ON) SetMask Color 8x 01 04 78 pp pp pp pp qq rr FF pp pp pp pp: Mask Color Settings qq: “0” Color Settings rr: “1” Color Settings SetPan TiltAngle 8x 01 04 79 0p 0p 0p Pan/Tilt Angle Settings 0q 0q 0q FF ppp: Pan
Command List Inquiry Command List (1/2) Inquiry Command Command Packet CAM_PowerInq 8x 09 04 00 FF Inquiry Packet Comments y0 50 02 FF On y0 50 03 FF Off CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position CAM_FocusModeInq 8x 09 04 38 FF y0 50 02 FF Auto Focus y0 50 03 FF Manual Focus CAM_FocusPosInq 8x 09 04 48 FF y0 50 0p 0q 0r 0s FF pqrs: Focus Position CAM_FocusNearLimitInq 8x 09 04 28 FF y0 50 0p 0q 0r 0s FF pqrs: Focus Near Limit Position CAM_AFSensitivi
Command List Inquiry Command List (2/2) Inquiry Command Command Packet CAM_LR_ReverseModeInq 8x 09 04 61 FF CAM_FreezeModeInq 8x 09 04 62 FF CAM_PictureEffectModeInq 8x 09 04 63 FF CAM_PictureFlipModeInq 8x 09 04 66 FF CAM_ICRModeInq 8x 09 04 01 FF CAM_AutoICRModeInq 8x 09 04 51 FF Inquiry Packet Comments y0 50 02 FF On y0 50 03 FF Off y0 50 02 FF On y0 50 03 FF Off y0 50 00 FF Off y0 50 04 FF B&W y0 50 02 FF On y0 50 03 FF Off y0 50 02 FF On y0 50 03 FF Off y0 50 02 FF
Command List Block Inquiry Command List Lens Control System Inquiry Commands ..............
Command List Camera Control System Inquiry Commands .........
Command List Other Inquiry Commands ........................................
Command List Enlargement Function Query Command ...............
Command List VISCA Command Setting Values Gain Exposure Control (1/2) 30fps Shutter Speed Iris 25fps 0F 28 dB 0E 26 dB 0D 24 dB 15 10000 10000 0C 22 dB 14 6000 6000 0B 20 dB 13 4000 3500 0A 18 dB 12 3000 2500 09 16 dB 11 2000 1750 08 14 dB 10 1500 1250 07 12 dB 0F 1000 1000 06 10 dB 0E 725 600 05 8 dB 0D 500 425 04 6 dB 0C 350 300 03 4 dB 0B 250 215 02 +2 dB 0A 180 150 01 0 09 125 120 00 –3 dB 08 100 100 07 90 75 06 60 50 0
Command List Exposure Control (2/2) IRIS Bright Exposure Comp. GAIN 1F F1.4 28 dB 1E F1.4 26 dB 1D F1.4 24 dB 1C F1.4 1B Zoom Ratio and Zoom Position (for reference) Zoom Position 0000 (WIDE end) ~ 4000 (TELE end) Zoom Ratio Optical Zoom position data 22 dB ×1 0000 F1.4 20 dB ×2 1804 1A F1.4 18 dB ×3 2296 19 F1.4 16 dB ×4 28F0 18 F1.4 14 dB ×5 2D58 17 F1.4 12 dB ×6 30AA 16 F1.4 10 dB ×7 3350 15 F1.4 8 dB ×8 357E 14 F1.4 6 dB ×9 3758 13 F1.
Command List Mask Setting MASK set Size of Mask Mask of Offset Mask Bit MASK Display color Mask_A 00 Mask_B 01 Mask_C 02 Mask_D 03 Mask_E 04 Mask_F 05 Mask_G 06 Mask_H 07 Mask_I 08 Mask_J 09 Mask_K 0A Mask_L 0B Mask_M 0C Mask_N 0D Mask_O 0E Mask_P 0F Mask_Q 10 Mask_R 11 Mask_S 12 Mask_T 13 Mask_U 14 Mask_V 15 Mask_W 16 Mask_X 17 Width (W) 00 ~ 50 High (H) 00 ~ 3C H Position (X) B0 ~ 50 V Position (Y) C4 ~ 3C Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
Command List Register Setting 00 Register # Value mm pp VISCA Baud Rate 00 Frame Rate 70 Image Out mode 71 01 02 03 04 05 06 07 A B C D E F G H 08 09 0a 0b 0c 0d 0e 0f I J K L M N O P 00 9600 bps 10 11 12 13 14 15 16 17 01 19200 bps Q R S T U V W X 02 38400 bps 18 19 1a 1b 1c 1d 1e 1f 01 29.
Specifications Specifications 1 Image sensor /4 type IT CCD (HAD) Picture elements Approx. 330K pixels (659 (H) × 494 (V)) Horizontal resolution VGA 640 × 480 Lens 18× zoom F= 4.1 mm (WIDE) to 73.8 mm (TELE), F1.4 to F3.0 Zoom movement speed Optical WIDE/Optical TELE 2.1 s ∞ to Near 0.5 s Angle of view (H) 48 degree (WIDE end) to 2.8 degree (TELE end) Min. working distance 290 mm (WIDE end), 800 mm (TELE end) Sync system Internal Min. illumination 1.6 lx (F1.4, 1/30 s : Typical value) 0.38 lx (F1.
Specifications Timing Charts DIGITAL Port Interface 58
Specifications Output Timing (Rec601 Progressive) * 29.97 fps/25 fps PCCK = 13.5 MHz (74.07 ns) 1H= 858ck (63.555 µs) fh= 15.734 kHz 1v= 525 H 1V= 29.97 Hz Output Timing (Rec656 Progressive) * 29.
Specifications Output Timing (Rec656 Interlace) * 29.
Specifications External Dimensions Front Right side Within a depth of 3 mm (1/8 in.) or less form the side Top Left side Within a depth of 3 mm (3/32 in.) or less form the top surface Bottom Within a depth of 3 mm (1/8 in.) or 1/4-20UNC less form the bottom surface (Tripod screw for camera) Back 9 Within a depth of 7 mm ( /32 in.
Specifications Pin Assignment CN501 CN701 24P FFC (0.5mm) KYOCERA ELCO Co. 046240024006848+ 10P FFC (0.5mm) KYOCERA ELCO Co. 046240010006848+ Pin No. Pin No. Name 16 bit data bus Level 8 bit data bus Level Name Level 1 UNREG Power Input 6 - 12 V (dc) 2 UNREG Power Input 6 - 12 V (dc) 3 UNREG Power Input 6 - 12 V (dc) 4 UNREG Power Input 6 - 12 V (dc) 5 GND Ground GND Ground 1 GND Signal Ground 6 2 Y0 Digital Y-Out 0 0 - 3.3 Vp-p Digital Out 0 0 - 3.
Specifications CN403 12P FFC (0.5mm) KYOCERA ELCO Co. 086222012101848+ Pin No. Name Level 1 GND 2 GND 3 KEY_AD0 Pull up to 3.0 V by 100 kohm 4 KEY_AD1 Pull up to 3.0 V by 100 kohm 5 KEY_AD2 Pull up to 3.0 V by 100 kohm 6 KEY_AD3 Pull up to 3.0 V by 100 kohm 7 KEY_AD4 Pull up to 3.0 V by 100 kohm 8 KEY_AD5 Pull up to 3.0 V by 100 kohm 9 KEY_AD6 Pull up to 3.0 V by 100 kohm 10 KEY_AD7 Pull up to 3.
