Tutorial Guide

Lesson 2 Beginner’s Course

3 Close the window.

Close the Action Window.

Testing an action on AIBO

If you are using a wireless LAN, you can check an action by having

AIBO perform it. Unlike checking an action through 3D modeling, this

test allows you to see how AIBO moves in real life.

1 Insert the “Memory Stick” into AIBO and place

AIBO at a place where communication with the

PC is possible.

2 Select an action or elements in the Main

window and play them back with the Test

menu as follows.

Testing an action

Select an action file and select Test-Test Action from the menu.

Testing a motion

Select a motion file and select Test-Test Motion.

Testing a sound

Select a sound file and select Test-Test Sound.

Testing LEDs

Select an LED file and select Test-Test LED.

3 After the data has been transferred, click Play.

See how AIBO performs the action.

If you are not using a wireless

LAN, go to page 86, where you’ll

learn how to preview elements

and actions that are not registered

to an action library.

If you are not using a wireless

LAN, you will have to add the

action to a behavior in order to

have AIBO do a test performance

of the action.

To have AIBO test a behavior

using a wireless LAN, you must

first register the file for the

respective action or elements to the

action library in advance.

Files are not be saved to the

“Memory Stick” when doing a test

performance.

To stop AIBO immediately, click

the Stop button. Note that AIBO

may fall over if AIBO is stopped in

an unstable position.