Datasheet

eBridge1CR –

IP over Coax

Receiver

The eBridge1CR – IP over Coax receiver is

designed for use with eBridge1CT to enable

fast 10/100Base-T Ethernet digital commu-

nication over coax cable. This plug and

play unit facilitates system upgrades from

analog to IP cameras/devices utilizing

existing legacy Coax and eliminating the

costs and labor associated with installing

new network cabling. In addition data

transmission is extended to 2,000’ (over five

times the 100m/328’ Ethernet maximum

length), eliminating the need for repeaters.

eBridge units will transmit Composite Video

Signal with Ethernet data simultaneously.

PAGE 1
eBridge1CR – IP over Coax Receiver The eBridge1CR – IP over Coax receiver is designed for use with eBridge1CT to enable fast 10/100Base-T Ethernet digital commu nication over coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling.
PAGE 2
Specifications Input: – 12VDC to 24VDC Class 2 power supply (polarity not observed) or 16VAC to 24VAC Class 2 plug-in transformer. Power Consumption: – 12VDC/275mA, 24VDC/110mA, 16VAC/375mA, 24VAC/200mA. SLOCTM Compliant: – Incorporates *slocTM (Security Link over Coax) technology. Ethernet: – Connectivity: RJ45, auto-crossover. – Wire type: 4-pair CAT-5 or better structured cable. – Distance: up to 328 ft. (100 m). – Speed: 10/100BaseT, half/full duplex, auto negotiation.