Operating Instructions
Table Of Contents
- Table of Contents
 - Package Contents
 - Features
 - Parts Identification
 - Power Supply
 - Attaching the Supplied Accessories
 - Receiver Settings
 - Transmitter Settings
 - Enabling Encrypted Transmission
 - Channel Frequency List
 - System Configuration Examples
 - Troubleshooting
 - Important Notes on Use
 - Notes on Charging Batteries
 - Specifications
 
Notes on Charging Batteries / Specifications
23
Notes on Charging 
Batteries
• Always use the BC-DWZ1 battery charger (not 
supplied) when recharging.
• Only nickel-metal-hydride batteries can be recharged.
• The unit will automatically turn off during recharging. 
Audio cannot be transmitted during this time.
• When charging batteries, follow the temperature 
specifications for the batteries you are using.
• Do not insert batteries that were used in other devices in 
the transmitter for charging.
Important
The antenna covers (ZTX-M02RC) and the body of the 
unit (ZTX-B02RC) are the areas that are charged and may 
become hot during or immediately after charging. This is 
not a malfunction.
Specifications
Design and specifications are subject to change without 
notice.
DWZ-M70
Carrier frequencies
2402.0 MHz to 2478.5 MHz
Occupied RF bandwidth
2.5 MHz
Type of emission
F1D and F1E
Modulation method
GFSK
Operating temperature
0 °C to 50 °C (32 °F to 122 °F) (during 
charging: 0 °C to 40 °C (32 °F to 
104 °F))
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Delay time Approx. 5 milliseconds (Wide Band)
Approx. 3 milliseconds (Narrow Band)
ZTX-M02RC handheld microphone
RF output level 10 mW (e.i.r.p.)
Antenna λ/4 monopole antenna
Microphone type
Uni-directional dynamic
Frequency response
Transmission: 10 Hz to 22 kHz
Microphone unit: 70 Hz to 18 kHz
Maximum input level
142 dBSPL (when attenuator level is 
12 dB)
Dynamic range 102 dB (A-weighted)
Power requirements
3.0 V DC (two LR6 (size AA) alkaline 
dry cell batteries)
Battery life Approx. 10 hours of continuous use 
(25 °C (77 °F) ambient temperature, 
Notes
• Always verify that the unit is operating properly before use. 
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY 
KIND INCLUDING, BUT NOT LIMITED TO, 
COMPENSATION OR REIMBURSEMENT ON ACCOUNT 
OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS 
DUE TO FAILURE OF THIS UNIT, EITHER DURING THE 
WARRANTY PERIOD OR AFTER EXPIRATION OF THE 
WARRANTY, OR FOR ANY OTHER REASON 
WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY 
KIND MADE BY USERS OF THIS UNIT OR MADE BY 
THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION 
OR DISCONTINUATION OF ANY SERVICES RELATED 
TO THIS UNIT THAT MAY RESULT DUE TO 
CIRCUMSTANCES OF ANY KIND.










