User's Manual

16
TX (Transmitter Virtual)
1/2 Menu
For details on menu operation, see “Basic menu
operations” on page 12.
The Sony digital wireless transmitter sends not only digital
audio signals, but also various other information
(metadata) related to transmitter settings.
The receiver can display such metadata received from a
transmitter using the TX (transmitter virtual) 1/2 menu.
a) Indicates the power setting of the transmitter from which transmission is
currently being received.
“NO DATA” appears when the transmitter is turned off or
located outside the service area. “NO FUNCTION”
appears when the transmitter does not have the metadata
transmission function.
Display of the transmitter’s name
(NAME)
The name of the transmitter from which transmission is
currently being received is displayed.
Displaying of the audio attenuator
setting
(ATT)
This displays the transmitter audio updater settings.
“---” appears if LINE is selected in the transmitter INPUT
LEVEL.
Display of the low-cut filter setting
(LCF)
The low-cut filter setting of the transmitter is displayed.
Lock function setting display (LOCK)
This disables the transmitter main unit POWER button and
locks settings so they cannot be changed. Doing so
prevents users from accidentally turning off the power.
Settings can be changed via Cross Remote from the
receiver even if the transmitter LOCK function is enabled.
Display of the power save setting
(POWER SAVE)
The power save setting of the transmitter is displayed.
Display of audio input level
(INPUT LEVEL)
The audio input level setting of the transmitter from which
transmission is currently being received is displayed.
Display of the transmission power
setting
(RF POWER)
The transmission power setting of the transmitter from
which transmission is currently being received is
displayed.
Display of the +48V power setting
(+48V)
The +48V power setting of the transmitter is displayed.
Time display (TIME)
The following time is displayed according to the
transmitter BATT REMAIN setting.
USAGE TIME: Displays the accumulated transmitter
usage time.
BAT.REMAIN: Displays the estimated remaining
transmitter operating time.
Display of battery level display
settings
(BATT REMAIN)
This sets the display method for the transmitter battery
level.
Note
Note
Audio RF signal
Metadata
Wireless remote control
Function name
Menu name
Item to be set
a)